Databound Image In Report Header
Jun 14, 2006
After finding out that SSRS doesn't directly support databound items in the header or footer, I found the workaround from Microsoft yesterday at http://msdn2.microsoft.com/en-us/library/ms159677.aspx. The problem is that their solution only works for the first page of the report, so it's basically useless! Because this is an image, it also means the workaround of using a parameter doesn't work, either.
Does anybody have any advice? Is there a solution to this problem?
View 10 Replies
ADVERTISEMENT
Oct 31, 2006
I followed the instructions from this post...
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=384621&SiteID=1
on how to add databound images into a report header.
The issue I am encountering is exporting to PDF. If the report spans multiple pages, in PDF the image only shows up on the first page..and broken on all other pages.
I have tied the hidden image to the table that spans multiple pages. Shows ok in HTML but breaks when exported.
Thanks for any help.
View 3 Replies
View Related
Jun 22, 2015
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report  are static. we are using SSRS 2008
View 6 Replies
View Related
Jul 18, 2007
I embeded an image in my report.When i export it to PDF and Excel,it works fine but in HTML in does not show..
Can anyone tel me why..
Thanks,
Plengski
View 1 Replies
View Related
Jan 12, 2006
Hi all,
I have a problem in displaying databound images in page header.
I have done as is stated in the below article.
----X----
http://msdn2.microsoft.com/en-us/library/ms159677(en-us,VS.90).aspx
Adding a Databound Image to a Header or Footer
You can use image data stored in a database in a header or footer. However, you cannot reference database fields from the Image control directly. Instead, you must add a text box in the body of the report and then set the text box to the data field that contains the image (note that the value must be base64 encoded). You can hide the text box in the body of the report to avoid showing the base64 encoded image. Then, you can reference the value of the hidden text box from the Image control in the page header or footer.
For example, suppose you have a report that consists of product information pages. In the header of each page, you want to display a photograph of the product. To print a stored image in the report header, define a hidden text box named TXT_Photo in the body of the report that retrieves the image from the database and use an expression to give it a value:
=System.Convert.ToBase64String(Fields!Photo.Value)
In the header, add an Image control which uses the TXT_Photo text box, decoded to show the image:
=System.Convert.FromBase64String(ReportItems!TXT_Photo.Value)
----X----
but I am not getting the image.
The error message displayed is like this
[rsInvalidExpressionDataType] The Value expression used in image €˜image2€™ returned a data type that is not valid.
Can any one help me in this regard.
Thanks in advance.
Ramesh
View 5 Replies
View Related
Apr 17, 2007
Hello All,
I am unable to display report header when I deploy the reports on report server (Internet). However, they look perfect when previewed in the BI studio. Any clue where could be the problem?
Thanks in Advance!
Rashi
View 3 Replies
View Related
Jan 23, 2007
How to display an database image in the Report page header of sql server reporting service?
View 3 Replies
View Related
Mar 13, 2008
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
View 1 Replies
View Related
May 13, 2015
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
View 3 Replies
View Related
Nov 6, 2007
Hi Friends,
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
I donot why it is happening?
Your help is highly appreciated.
Thanks
Novin
View 1 Replies
View Related
Dec 27, 2006
Does anyone know a way to display the header of a sub report when the sub report is part of a main report? Im able to get the main report and the sub report to display properly, but the header of the previously developed/tested sub report will not display when embedded in a main report.
Thanks,
MP
View 4 Replies
View Related
Jun 22, 2007
All,
I have a report that grows horizontally as it contains a matrix. In the header section of the report, I have items such as Title and time stamp in text boxes. How can I make these items align in the center if the report grows horizontally, it looks kinda odd with report title not being in the center? Any input will be appreciated.
Thanks.
View 1 Replies
View Related
May 26, 2008
Hi Team,
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?
View 1 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
May 30, 2007
Hi,
I need to create a report header that will only be shown on the first page. And I want to use the built in header system that is included with report. I can't create a custom header on the body part because I am using multiple columns for report rendering. Currently the header system either displays the header on all pages or it shows in all pages except the first or last page. Any help is greatly appreciated. Thanks.
View 4 Replies
View Related
Jul 13, 2007
Can any one tell me what to use to substitute Table in report Header?Or is there any other way?Because when i am using Textboxes align horizontally as replace to table,to align to my table in the body,when i exported it to excel,ive got problems in alignment in cell,Thanks
View 7 Replies
View Related
Jun 13, 2006
How can I
create a header that will only appear on the first page? The page
header doesn't seem to have an expression area that would accomplish
this and globals are not useable in table headers.
Thanks
View 3 Replies
View Related
Jan 25, 2006
I am creating a report which consists of data in two columns. I've set the Body section to have 2 columns in it. This works fine until I start working with the report header. I do not want a page header that shows up on every page, I only want a header on the first page, a report header.
I first tried to hide the header by placing it in the Page Header section, then putting in the "page > 1" expression in the visibility property. This does what I want, except a large blank space is present at the top of my report (the header is about 1.2 "). This is unacceptable.
So my next test was to put the header into the Body section so that it only shows up in the beginning of the report. Because of this, I will need to remove the columns from the Body and make it only 1 column now. I decided to put the multi-column section into a subreport that has 2 columns and add this to the body of my report. But, this failed; the data appears in one column only. I can change the width the ensure it fits and set all other sorts of properties, nothing works.
I've researched both issues and found that these are both "bugs" in reporting services, although I cannot find thedocumented bugs.
Is there any workaround to putting a header onto only the first page of a multi-column report? Other reporting engines are able to handle this with ease, I'm suprised by Reporting Services lack of a "Report Header" section. I am an experienced .NET developer, so if there is a programmatic way through this, I am game.
Thanks,
Scott Steigerwald
View 13 Replies
View Related
Nov 16, 2007
Hi all,
I have a client report in which I have two images in the header portion. I have assigned two different images for the two image report controls.
The Problem is that the report is showing two images in only one system. (I ran the code which is available in SOURCE CONTROL, so the code is not the problem)
In all other systems the first image is getting repeated. The configuration is same and there is no change in HARDWARE.
Have anybody faced the same problem.....................
View 6 Replies
View Related
Jan 12, 2006
Hi.
I want some information stored in the database to be shown on the top of each page in my report. But in the report designer I get an error message if I try to drop a table in the header, and if I try to assign the value of a textbox in the header to e.g. "First(Fields!sometable.Value)", I get a runtime-error in the preview that says "... Fields cannot be used in page headers or footers".
How can I do this?
Regards, Tomsi
View 36 Replies
View Related
Dec 26, 2007
I have placed a textbox in the pageheader section of the report. In the textbox expression, I am trying to use a field . THis is an example of the expression in that textbox.
=First(Fields!ID.Value, "Jobstat")
Howver it gives an err "THE Value expression for textbox referes toa field. Fields cannot be used in page headers or page footers"..Is there any other option that I have? I need this expression/field to be a part of page header, but not table header.
Also, pl note that I have tried to place the field expression in a text box in the body of the report, and then refer to that text box in the page header or footer.However, when I do that, my expression does not appear on any pages of the report, only appears on the last page of the report.
View 5 Replies
View Related
May 12, 2005
Help,
I have a simple app that only has on datagrid that is bound by the typical sqlconnection,sqldataadapter and dataset. But I keep getting this error:
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.Source Error:
Line 55: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Line 56: 'Put user code to initialize the page here
Line 57: SqlDataAdapter1.Fill(DataSet11)
Line 58: DataGrid1.DataBind()
Line 59:
WHY :)
View 2 Replies
View Related
Feb 28, 2007
I've built a fairly straight forward report in RS that looks normal in preview mode and in PDF format with out any issues.But when I export it to Excel report header is not appearing in each page.Any ideas as to why this is occurring?thanks in advance,Ramesh KS
View 1 Replies
View Related
Oct 4, 2006
I have a report that I put links to other reports in the page header.
When I click on those links, I get the error:
"source of the report definition has not been specified"
If I move the links to the body of the report, they work fine.
Is this a bug or a limitation, and will we eventually be able to put links in the header?
Thanks!
BobP
View 3 Replies
View Related
Sep 1, 2006
I have a matrix report, which looks like the following:
Header C Header D
Column A Column B Column C Column D
Column A and B are Row Group columns in the matrix. Column C and D are the details columns. How can I add column header to column A and B. Seems I cannot do it in Reporting Services 2005.
Fan
View 8 Replies
View Related
Nov 22, 2007
Hi,
I have a report with 2 tables (table1 and table2) in the report body. I have txtempname kept in table 1. I access the textbox value in the header using the following expression
=(report!txtempname.value)
This works fine. However when table2 gets populated on of the subsequent pages, the value in the header disappears. It is visible only for the 1st 10 pages where the table 1 data is there.
How to make sure that the value of the header displays for all the pages
thanks
Killy.
View 3 Replies
View Related
Oct 22, 2007
Is there any thing like Report header in SSRS ? As a work around I am using a Rectangle control in the page header which I make visible if page number is 1 otherwise not visible. But if its invisible only the other items in the header seem to move up while the body height remains unchanged which I do not want. I want the body height to increase if the Report header is absent. Please let me know if I am missing something or if the SSRS has something like Report header already.
View 6 Replies
View Related
Mar 15, 2007
I have report with large records and many columns
I would like to freez header and specific column like excel
I tried to freez header it self it's worked
I tried to freez a column it self it's worked
when I tried to freez both in same report it does not work..
any help??
View 1 Replies
View Related
Jan 9, 2007
I have a report that is being called via stored proc, and i want to group by contract. when report gets generated i get multiple contracts info. but will be grouped/sorted by contract.
please how can i have a group header and also a group footer to show a summary of each contract information with some calculated fields in it.
i may get 100 records related to 10 contracts , 10 rows for each contract.
as soon as the first contract info is shown on the report it has to show a summary related to the first contract in the group footer, and then continue populating the second contract info and so on.
Please i am totally new to reporting and help would be appreciated. thank you all.
View 2 Replies
View Related
Oct 24, 2007
Is there anyway to create a Report Header in SQL Reporting Services?
I am guessing "no", but I have to at least try and ask away.
Okay, I have had reports where on the first page they want a report header, and then on the 2nd and the consequent pages they want a page header. This is simple, in the Page Header I put the text box(s) for the Report Header in one Rectangle and then the text box(s) for the Page Header in another Rectangle, stack the Rectangles on to of each other, and set the visibility property of the panels accordingly.
I also see on the table control (which I am using on my report), you can set the table header row(s) to either print on every page or only on the first page.
Neither of these options will work for the report I am trying to build based on a Crystal Report.
I have a page header that needs to appear on every page including the first page. It is about 3/8" tall. And then there is a requested report header that should only appear on the first page. The report header is about 2" tall. So if I try my trick I used before, I will have 2" inches of white space on the 2nd and consequent pages. The Report Header would correctly print on the first page, but the size of the Rectangle (even if the visible property is set to false) will still eat up white space.
Is there anyway around this, or will I need to have the users redesign their report to fit SQL reporting services?
Let me know if you have any ideas.
Thank you,
T.J.
View 8 Replies
View Related
Nov 9, 2007
I'm trying to get the following sql to work in a textbox. I have select the textbox properties and it's value is
=datename(m,dateadd(m,-1,current_timestamp))
I would like the results of "October"
however I get the following error
The value expression for the textbox €˜textbox1€™ contains an error: [BC30451] Name 'datename' is not declared.
I'm pretty new to this so I do not know excatly what that error means.
Any help for me out there?
Thanks,
Cardgunner
View 11 Replies
View Related
May 22, 2008
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033
Anyone have some pointers for me?
Kia
View 1 Replies
View Related
Aug 2, 2007
I have a multi-column report with a page header that spans the width of the report. Whenever I close the report and reopen it, the header is changed to the width of the column. This isn't a real big deal because I deploy it with the header across the whole page; but once in a blue moon I accidentally hit the F5 key (which I am used to using for refresh in other environments I work in) and the report gets redeployed with the messed up header. Is there anyway to stop RS from automatically adjusting the page header?
And is there anyway to disable the F5 key from deploying the reports. I do use it to build and run windows apps, and don't want to change that, but I don't want to deploy 80+ reports when I accidentially hit it.
Thanks.
View 1 Replies
View Related
