(0x80040E14) Syntax Error (missing Operator) In Query Expression Single Quotes
I am recieving the Microsoft JET Database Engine (0x80040E14) Syntax error (missing operator) in query expression when updating data that contains single quote marks, for example: Code:
View Replies
ADVERTISEMENT
1) I'm getting this error: Syntax error (missing operator) in query
expression on the below statement. Can I get some advice.
2) I searched ASPFAQ and came up blank. Where can find the "rules" for when
and how to use single quotes and double quotes in ASP? Code:
View Replies
View Related
I'm getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60
when running this code: .....
View Replies
View Related
I'm getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60
when running this code: ....
View Replies
View Related
Any ideas why im getting this error from these lines of code?
" WHERE [Personnel].p_id = [specialists].[p_id] " & _
" AND*[specialists].spu_id = " & Cint(Request.form("spec"))
View Replies
View Related
valuA = (request.form("toadd"))
If valuA = "" then
SQL = "UPDATE CourseReg SET attended='Active' WHERE ID
IN("&request.form("toadd")&")"
Set RS = MyConn.Execute(SQL)
End If
MyConn.Close
Set RS = Nothing
Set MyConn = Nothing
the error
syntax error (missing operator) query expression ID IN ()
View Replies
View Related
First time poster here but I've spent a while lurking and reading the great threads here
I've got a problem that I've wrapped my head around for a few days and I can't seem to figure it out.
Im using ASP with Access 2000 DB. I want to perform a simple lookup by ID (AutoNumber in Access) and it says I am missing an operator. Code:
View Replies
View Related
I am trying to insert values into a database using an sql statement that i read from a table that contains all my different sql commands. The sql statement is stored in the following way in the table: Code:
View Replies
View Related
I'm trying to pass a piece of data i get from a query using a different form's passed values. This is how I get the data into the new form and how I try to pass it to the next asp page query.
<td valign=TOP width="168"><form action="HouseDetail.asp" method="post" name="MLS" id="MLS"><input name="MLS" type="hidden" value='<%=oRs("ML_Number")%>'><input name="Submit2" type="submit" value="Get Details"/></form></td>
The value='<%=oRS(ML_Number")%>' generates a real value like '2403943' - and the field I'm trying to use this value in the qry is expecting a number. But even passing the number without the single ' at both ends generates the same error message. Code:
View Replies
View Related
I am working on a project using an access db. Here is the problem.
Error
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'unit=6400s'
Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code:
sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
View Replies
View Related
This is the sql statement:
sqlquery="SELECT * FROM tblrequest WHERE Req_id= " & Req_id & " "
set rs=con.execute (sqlquery)
Req_id is coming from a form like so:
Req_id=request.form("Req_id")
The error is:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Req_id='.
On the first line of the query.
See anything wrong that would cause this error?
Please help, the Req_id is being sent from previous form via a hidden value hope i'm requesting this properly.
View Replies
View Related
i have a drop down list that populates a table based on the user input. The table than has some products, I'm trying to have the product name link to another page with full details about the product. I'm close but just need some help with the sql. The sql is:
"Select * FROM tablename WHERE ID =" & request.Form("ID")
ID is defined as autonum in the database, the error message i'm getting is:
Syntax error (missing operator) in query expression 'ID ='.
View Replies
View Related
to search based on the beginning characters the sql should be
sql="SELECT * FROM Employee Where Emp_Id Like '" & strId & "%'"
View Replies
View Related
I'm working on a page so that a user can change their password. I thought might be a simple update of a database, but everytime I do it I get the following error message. I've put x's where my ID would be showing for security purposes. Code:
View Replies
View Related
I am trying to execute the following SQL Statement:
SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT (Team, Played, Wins, Loses, Draws, For, Against, Points) from HomeWins WHERE postponed=''"
But i am getting the following error message:
Syntax error (comma) in query expression '(Team, Played, Wins, Loses, Draws, For, Against, Points)'.
And i dont know why. All of the fields are numerical apart from TEAM is that helps.
All i want to do is Insert data from one table into another but i cant use SELECT * because one table has one extra field to the other and when i tried to amend the SQL to look like this:
SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT * from HomeWins WHERE postponed=''"
i get this error:
Number of query values and destination fields are not the same
View Replies
View Related
i keep getting this error in this script on this line in display-course.asp
sql= "Select * from course_data WHERE Course_Id="&course_id &" ORDER BY Course_Date_From"
course.asp
Code:
View Replies
View Related
iam trying to insert some data into a database but i keep getting the above error msg this is the line that is causing the problems any ideas?
Code:
sql3 = "Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES ("&courseid&", "&course&", "&title&", "&weekno&", "&status&")"
here is what is printed when I response.write the sql3 statement
Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES (285, NEBOSH, test, Week One, TBA)
View Replies
View Related
my SQL keeps coming back with the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Clients.Area_ID = 3 AND Clients.Category_ID = 7 OR WHERE Clients.Category_ID = 7 AND Clients.All_Areas = true'.
I am trying to pull out all records where area and category match, aswell as all records where category match and all_areas = true
Any suggestions as to where I am going wrong?
Code:
View Replies
View Related
I've got an HTML page with a series of links that are intended to search a category listing in a database.
for example
link 1 has a querystring of "?subid=Boats"
link 2 has a querystring of "?subid=Cars & Trucks"
link 3 has a querystring of "?subid=Men's & Women's Outerwear"
etc
As long as the subid doesn't contain any single quotes or any special characters such as the "&", my SQL works ok and the records are retrieved. 'm using Request("subid") to get my querystring value.Is there any way I can escape the single quotes or other special characters in the Request("subid") so it won't break the SQL?
View Replies
View Related
Access 2000 doesn't allow single quote when updating records from the webpage. If the user need to insert for example the name O'neil in a field it will create this error:
Syntax error (missing operator) in query expression ''O'neil', r_add1 ='Auburn', r_add2 =' ', r_city ='AUBURN', r_state ='WA', r_zip ='98001' WHERE r_id =279'.
Is there a script I can use to accept the single quote as part of a string of characters?
View Replies
View Related
what is the rule for single quotes around a value name in a strsql?
y do you have to do it sometimes?
View Replies
View Related
Could someone explain when to use double and single quotes? I'm having a problem with an insert statement and I think it may be the quotes. The error I get is a sql syntax error.
Here is the sql statement:
strSQL = "INSERT INTO [Members] (Website, email, category, phone_no, fax) " _
& "VALUES ('" & web & "','" & mail & "','" & cat & "','" & phone & "','" & fax & "')"
The values are variables. I checked the input statements first then assigned to variables. I hoped it would make the sql statement easier for me too read. Also does Access accept null?
View Replies
View Related
I have an events calendar on my site, allowing local people to post events there. Two problems have come up:1. In the details section, people will naturally want to include apostrophes (single quotes) from time to time. This fails, because VBScript sees them as delimiters. Is there any form of quote marks I can use to make sure this doesn't happen?
2. The same field is defined in the Access db as Memo, which normally gives up to 64K of text, as opposed to Text, which only allows 255. Despite this, text over 255 is ignored, leading to the text being truncated.
View Replies
View Related
I have SQL database and I am trying to replace single quotes with double single quotes to prevent SQL injection. The code is not replacing. Any suggestions?
PHP Code:
strSQL = "UPDATE Names SET "
strSQL = strSQL & "FirstName = '" & replace(firstNamefield, "'", "''") & "', "
strSQL = strSQL & "LastName = '" & replace(lastNamefield, "'", "''") & "' "
strSQL = strSQL & "WHERE Username = '" & replace(session("svUsername"), "'", "''") & "'"
mlConn.Execute(strSQL)
View Replies
View Related
I have 6 textboxes where if I fill them up I want the query to search if either one of them has results found. I have this but it's not working: Code:
View Replies
View Related
I need to parse the following:
aaa_bbb_d_yyyy_mm.ext
aaa = ITM, CPF, FAC, GEN
bbb = almost anything (even more then 3 chars)
d = M,Q,Y,R
yyyy = year
mm = month
I'm terrible at figuring out regexp so I turn to the kind folk of SP
View Replies
View Related
I have been getting an error in my ASP code that I hope someone can help me with.
I created a simple table in my SQL Server database called crm_contacts which stores contact information. I am connecting just fine but when I do an SQL query on the table I get an error. Here is what I got: Code:
View Replies
View Related
I am trying to update a table in my sql server 2000 database but getting this error:
Microsoft OLE DB Provider for SQL Server (0x80040E14)
Line 1: Incorrect syntax near '='.
I haven't seen this before and I'm at a loss to see what is wrong. Does anyone have any clues?
View Replies
View Related
Here is my asp code with my SQL statement.When I run it I keep getting this error and can't figure out why.
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in CREATE TABLE statement.
set rsaddwg = server.CreateObject("adodb.recordset")
dwgno = request.form("dwgno")
strSQL = "create table '"&dwgno&"'"
strSQL = strSQL & "(dwg_no integer not null, "
strSQL = strSQL & "rev_no autoincrement primary key,"
strSQL = strSQL & "title text,"
strSQL = strSQL & "cr_date date,"
strSQL = strSQL & "dr_by text)"
rsAddwg.open strSQL, adocon
set rsAddwg = nothing
set adocon = nothing
View Replies
View Related
I have this line:Code:
SQLstmt = "SELECT * FROM users Where Email=" & request.form("email")
and i'm getting this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression 'Email='gargamel@intermail.co.il'.
/users/newuser.asp, line 11
View Replies
View Related
I'm making a lost password recovery system. The user has to insert his e-mail address, the data is being sent to the validation page, where user's details are extracted from the DB according to the inserted e-mail and being mailed to this address. For some reason I keep getting this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'user_email=her@herdomain.com'.
/sendpass.asp, line 71
View Replies
View Related
Here's another error: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14). Incorrect syntax near 'Customers'.
Set ObjConn = Server.CreateObject("ADODB.Connection")
strConnection = "DSN=Northwind; Database=Northwind;"
strConnection = strConnection & "UID=; PWD=;"
ObjConn.Open strConnection
Set ObjRS = Server.CreateObject("ADODB.Recordset")
Set ObjRS.ActiveConnection = ObjConn
strQ = "SELECT Customers.CompanyName, "
strQ = strQ & "COUNT(Orders.OrderID) AS NumOrders"
strQ = strQ & "FROM Customers INNER JOIN Orders ON"
strQ = strQ & "Customers.CustomerID = Orders.CustomerID"
strQ = strQ & "GROUP BY CompanyName"
strQ = strQ & "HAVING (COUNT(Orders.OrderID) > 7)"
strQ = strQ & "ORDER BY COUNT(Orders.OrderID)"
ObjRS.Open strQ
View Replies
View Related
is it possible to have a replace() function in an SQL query? I need to use
something like that to be able to sort my "sequential-numbers", which are
actually textfields like this:
98.1
98.10
98.2
98.3
98.4
What I want is to query these numbers, convert them by removing the dot with
the replace command and the sort the recordset on it.
Is this possible?
View Replies
View Related