I have to do an ASP script that updates some columns in four MS Excel files, based on the SQL Server data. For 2 days I have an error :
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Excel Driver] Syntax error in UPDATE statement.
This is the code I use for the update statement:
When I try it on original server, it works, but when I moved everything to a different server it does not work. I have checked the dsn name, userid and passs. But no luck.
Error
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Code:
We hosted our asp based application under windows 2000 server with sql server 2000 as backend. All the asp module works fine with internet explorer version 5 but same application is giving odbc error when we run the application in IE 6.
The exact error is :
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified xxxxxxxx/login.asp, line 27
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
I keep getting this error message when im adding a new record to my database.
Here is my code: ....
I have this insert statement where instruction field in the DB is a memo field.
SQL="INSERT INTO int ([instruction]) VALUES " & _
"('"&Request.Form("myTextarea")&"')"
objConn.Execute(SQL)
Its giving me error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
I'm getting Internal Server Error in one of my pages. The server's error log says: ODBC driver does not support the requested properties. there was recently a hosting change but there is no way to find out the configuration of the previous hosting. The current hosting is on win server 2003-IIS , mssql 2000.
My connection string is
Application("ConnString") = "Driver={SQL Server};Server=*****;UID=*****;Password=*****;Database=*****"
After some tries in isolating the code that causes the error i believe that the error occures when this:
Server.CreateObject ("ADODB.Command") is executed.
I used following line to connect DB and get following ODBC driver issue
oConn.Open "UID=user1;PWD=abcd;DRIVER={Microsoft ODBC for Oracle};SERVER=server1;"
Error message:
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
I have an intranet site that uses basic authentication to allow users to view and update information from an Oracle DB (ver 8.1.6 -- ancient, I know). Anyway, the site worked fine as long as the machine accessing the ASP page was running Win 2k but when an XP machine tried to view the page, the client got an error:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Oracle][ODBC][Ora]ORA-12640: Authentication adapter initilization
failed
I tried googling the error and ran across a post that suggested using the Microsoft ODBC driver for Oracle rather than the Oracle ODBC driver. I made the change and things are working fine now. I guess my question is why did this happen? If it was really an ODBC driver problem it would seem to have occured regardless or the OS of the requesting machine. (After all, this is requested through HTTP)
Getting this strange error all of a sudden.
Microsoft OLE DB Provider for ODBC Drivers. error 80040e21
ODBC driver doesn't support the requested properties.
and the line is:
tRST.Open "SELECT id FROM " & sTable & " WHERE " & sField & " = '" & vValue
& "'", oConn, adOpenKeyset, adLockReadOnly
I'm using vbscript and this was working before I changed some tables and relationships, which should not affect the above line though.
My server was JUST upgraded to 2003, the system had been running fine under 2000, but after the system crash I was convinced to upgrade - that's when it all fell apart. I'm not doing anything fancy with asp, just passing a couple of fields and obtaining the record from the database.
I can disable IUSR_computername and when it prompts me to log in, using the Administrator's password, the ODBC driver fires and connects to the database just fine.
Re-enable the IUSR_ and it goes back to giving the can't load error.It has to be a permissions deal, I just don't know for what directory. Any help would be greatly appreciated, server has been down now for 81 hours.
You can see the error (when server comes back online) at:
FinalFinancing.com/stnick/ebook.html
I have a dynamically generated update statement which has a rathe large IN clause making comparisions on an indexed and keyed integer field. Here's the code below: ....
View Replies View RelatedSet cnt = Server.CreateObject("ADODB.Connection")
cnt.open "test"," "," "
cnt.close
set cnt = nothing
i have some simple asp code as above running well in http mode,but once i run this in https mode, i got the following error message .
line 3:
[MERANT][ODBC PROGRESS driver]Optional feature not implemented.
what i am using is Merant 3.70 32-bit Progress driver
and the progress db version is 9.1c
any suggestions? thanks a lot in advance
I am taking my first crack at writing some ASP and have no clue as to what this error is pertaining to. I will be in your perverbial debt for ever!
----------------------------------------------------------------------------
The error I am getting is:
Microsoft OLE DB Provider for ODBC Drivers error '80040e21'
ODBC driver does not support the requested properties.
/agentlookup.asp, line 8
-----------------------------------------------------------------------------
And here is the code it is referencing: Code:
I have sql server express at my PC-windows xp professional, I try to connect to a table via asp (queryString :"Driver={SQL Server};" &"Server=localhost;" & _
"Database=local;" & "Uid=nikos;" & "Pwd=nikos;" but there is an error
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC SQL Server Driver][DBNETLIB]"The SQL server does not exist or there is no permission.
I can login with EMS lite both with sql server Auth. and windows auth.What is fault?
i m trying to coneect to a access database Using DSN , but when i try to connect i get an error
Microsoft OLE DB Provider for ODBC Drivers error '8007000e'
[Microsoft][ODBC Microsoft Access Driver] System resource exceeded.
I am trying to peform a multiple deletion of records from a single table "Stockist"
I i keep getting the following Error and can't see where i am going wrong. Can anyone help?
Microsoft OLE DB Provider for ODBC Driverserror '80040e10'
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
/RetailerStockProductRemove.asp, line 22
The code i have used is as follows:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
this small bit of SQL:
SQL_EditNews = "INSERT INTO tblNews (newsBody) VALUES ('" & editedNews & "') WHERE newsID=63"
Is there something wrong with this statement? When i try to execute it, i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Missing semicolon ( ; ) at end of SQL statement.
/edit_news_03.asp, line 19
I am urgently finding a set of codes to write data into a form and the data will go to my database. However i have tried a lot of form but couldn't successfully process. Below is one of my problem...
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x9a8 Thread 0xa08 DBC 0x3041e1c Jet'.
I am using an ASP script on my site that reads a microsoft excel file and adds the values to the database (MS SQL Server). The script works completely fine on my LOCAL server, but it shows me the following error when I upload it to the server and try to run it.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Excel Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1128 Thread 0x2268 DBC 0xd2d0fec Excel'.
/Bacardi/bblcontest/readexcel.asp, line 5
FYI, I am using the following connection string:
I am getting this error when trying to run an Update query, Microsoft OLE DB Provider for ODBC Drivers error '80040e14' Can anyone explain to me what this means and where I'm going wrong.
View Replies View RelatedI am trying to update my database with hidden fields that are being requested from a previous page such as:
hfSectionOneScore
hfSectionTwoScore
hfSectionThreeScore
I'm not familiar how to write an UPDATE statement, and would like some help. I'm thinking that it is something like this:
UPDATE Director_Appraisals SET
Section1Score = request("hfSectionOneScore"),
Section2Score = request("hfSectionTwoScore"),
Section3Score = request("hfSectionThreeScore"),
WHERE UserID = request("hfUserID");
Of course there are more columns, but am I on the right track? Does the syntax look correct?
Code:
MySql="UPDATE country SET country.country_name='" & country_name & "'
WHERE country.country_id =" & country_id & ";"
Hi,
My question relates to the quotes in the above query. I was able to find my probem by searching the forum, but I am interested in knowing why I must use single quotes around the following: Code:
country.country_name='" & country_name & "' ....
I have been trying to do this code but I cannot make it works. Could you help debugging the code.I dont know if the code is in the correct syntax or not.
I place this code at the top of all my page to check an invalid user that are trying to access the page without logging in. When they are success, I want to update a field to store the current time ("LastActive" field)
When the user login, I ask for their Username and password!and then, reffering to this username, update the LastActive field.
strQuery2 = "Update tbCard_Temp Set tbCard_Temp.Id='tbCardSwipe.Id
From tbCardSwipe'"
and i get this message
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'tbCardSwipe.Id From tbCardSwipe'.
May I know what is the syntax to copy multiple records to a single record? login_userid is in string.
sql =" UPDATE user, leave_summary_temp SET user.l_annual_taken = leave_summary_temp.l_annual_taken
sql = sql & " WHERE user.login_userid = leave_summary_temp.login_userid "
conn.Execute( sql )
Let's say in user table
login_userid | l_annual_taken
steve | 0
and in leave_summary_temp
login_userid | l_annual_taken
steve | 2
steve | 1
steve | 4
So, after the copy, the result in user table should be
login_userid | l_annual_taken
steve | 7
The following error is appearing
Microsoft JET Database Engineerror '80040e14'
Syntax error in UPDATE statement.
/TestUpdate4.asp, line 111
with the following page. Been told has something to do with Field Names?????
with the syntax below wouldn't it update all acct stats with the name potential client
where before the values were set to 0? Am I writing this correctly? User_info is the table and i don't know whether or not if it goes in there. update user_info set acct_stat Potential Client where acct_stat = "0";
I m using windows 2003 server, mysql and asp for my web site, I can select, insert, delete data from mysql, but I cannot update, this is the error that I get
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
and this is where the error is in the script:
objNotas.Open SQL, DBConn, 1, 3
I'm having trouble with an SQL UPDATE string updating Microsoft Access 2000 with jet engine using ASP classic. I can't see what could be going wrong, as far as I can tell it's fine. I have tried surrounding my field names with brackets [] to no avail.
The error I receive is: Code:
i'm trying to update a row in my Access Database by the AD_ID... i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.
/alterantique1.asp, line 35
Here is the code:
SQL = "UPDATE * FROM IME_request SET instructName = '" &InstructName& "', email = '" &email& "', school = '"&school&"', courseNumber='"&courseNumber&"', dateMonth = '"&dateMonth&"', dateYear = '"&dateYear&"', dateDay = '"&dateDay&"', description = '"&description&"', instructDesign = '"&instructDesign&"', techranger = '"& techranger & "', IP= '"&IP&"', completed = '"&completed&"', feedback = '"&feedback&"' WHERE courseNumber='" &courseNumber&"' "
I have a form that I want to update my database. I am receiving an error that reads:
Syntax error in UPDATE statement.
I'm trying to update my counter in DB (Access) using sql query but the following error appears
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/cms/modules/test.asp, line 14
How could i solve this problem, here is sql query that i'm trying to run
sql = "UPDATE articles SET counter=counter+1 where (((aid) ="&aid&"))" .