(missing Operator) In Query Expression
i have a drop down list that populates a table based on the user input. The table than has some products, I'm trying to have the product name link to another page with full details about the product. I'm close but just need some help with the sql. The sql is:
"Select * FROM tablename WHERE ID =" & request.Form("ID")
ID is defined as autonum in the database, the error message i'm getting is:
Syntax error (missing operator) in query expression 'ID ='.
View Replies
ADVERTISEMENT
1) I'm getting this error: Syntax error (missing operator) in query
expression on the below statement. Can I get some advice.
2) I searched ASPFAQ and came up blank. Where can find the "rules" for when
and how to use single quotes and double quotes in ASP? Code:
View Replies
View Related
I'm getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60
when running this code: .....
View Replies
View Related
I'm getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60
when running this code: ....
View Replies
View Related
Any ideas why im getting this error from these lines of code?
" WHERE [Personnel].p_id = [specialists].[p_id] " & _
" AND*[specialists].spu_id = " & Cint(Request.form("spec"))
View Replies
View Related
valuA = (request.form("toadd"))
If valuA = "" then
SQL = "UPDATE CourseReg SET attended='Active' WHERE ID
IN("&request.form("toadd")&")"
Set RS = MyConn.Execute(SQL)
End If
MyConn.Close
Set RS = Nothing
Set MyConn = Nothing
the error
syntax error (missing operator) query expression ID IN ()
View Replies
View Related
First time poster here but I've spent a while lurking and reading the great threads here
I've got a problem that I've wrapped my head around for a few days and I can't seem to figure it out.
Im using ASP with Access 2000 DB. I want to perform a simple lookup by ID (AutoNumber in Access) and it says I am missing an operator. Code:
View Replies
View Related
I am trying to insert values into a database using an sql statement that i read from a table that contains all my different sql commands. The sql statement is stored in the following way in the table: Code:
View Replies
View Related
I am recieving the Microsoft JET Database Engine (0x80040E14) Syntax error (missing operator) in query expression when updating data that contains single quote marks, for example: Code:
View Replies
View Related
I'm trying to pass a piece of data i get from a query using a different form's passed values. This is how I get the data into the new form and how I try to pass it to the next asp page query.
<td valign=TOP width="168"><form action="HouseDetail.asp" method="post" name="MLS" id="MLS"><input name="MLS" type="hidden" value='<%=oRs("ML_Number")%>'><input name="Submit2" type="submit" value="Get Details"/></form></td>
The value='<%=oRS(ML_Number")%>' generates a real value like '2403943' - and the field I'm trying to use this value in the qry is expecting a number. But even passing the number without the single ' at both ends generates the same error message. Code:
View Replies
View Related
I am working on a project using an access db. Here is the problem.
Error
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'unit=6400s'
Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code:
sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
View Replies
View Related
i keep getting this error in this script on this line in display-course.asp
sql= "Select * from course_data WHERE Course_Id="&course_id &" ORDER BY Course_Date_From"
course.asp
Code:
View Replies
View Related
iam trying to insert some data into a database but i keep getting the above error msg this is the line that is causing the problems any ideas?
Code:
sql3 = "Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES ("&courseid&", "&course&", "&title&", "&weekno&", "&status&")"
here is what is printed when I response.write the sql3 statement
Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES (285, NEBOSH, test, Week One, TBA)
View Replies
View Related
my SQL keeps coming back with the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Clients.Area_ID = 3 AND Clients.Category_ID = 7 OR WHERE Clients.Category_ID = 7 AND Clients.All_Areas = true'.
I am trying to pull out all records where area and category match, aswell as all records where category match and all_areas = true
Any suggestions as to where I am going wrong?
Code:
View Replies
View Related
This is the sql statement:
sqlquery="SELECT * FROM tblrequest WHERE Req_id= " & Req_id & " "
set rs=con.execute (sqlquery)
Req_id is coming from a form like so:
Req_id=request.form("Req_id")
The error is:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Req_id='.
On the first line of the query.
See anything wrong that would cause this error?
Please help, the Req_id is being sent from previous form via a hidden value hope i'm requesting this properly.
View Replies
View Related
I have 6 textboxes where if I fill them up I want the query to search if either one of them has results found. I have this but it's not working: Code:
View Replies
View Related
is it possible to have a replace() function in an SQL query? I need to use
something like that to be able to sort my "sequential-numbers", which are
actually textfields like this:
98.1
98.10
98.2
98.3
98.4
What I want is to query these numbers, convert them by removing the dot with
the replace command and the sort the recordset on it.
Is this possible?
View Replies
View Related
to search based on the beginning characters the sql should be
sql="SELECT * FROM Employee Where Emp_Id Like '" & strId & "%'"
View Replies
View Related
I'm working on a page so that a user can change their password. I thought might be a simple update of a database, but everytime I do it I get the following error message. I've put x's where my ID would be showing for security purposes. Code:
View Replies
View Related
I am trying to execute the following SQL Statement:
SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT (Team, Played, Wins, Loses, Draws, For, Against, Points) from HomeWins WHERE postponed=''"
But i am getting the following error message:
Syntax error (comma) in query expression '(Team, Played, Wins, Loses, Draws, For, Against, Points)'.
And i dont know why. All of the fields are numerical apart from TEAM is that helps.
All i want to do is Insert data from one table into another but i cant use SELECT * because one table has one extra field to the other and when i tried to amend the SQL to look like this:
SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT * from HomeWins WHERE postponed=''"
i get this error:
Number of query values and destination fields are not the same
View Replies
View Related
I have one string (strWeekday) which contains a single day of the week like 'monday' and another string (strDeldays) which can contain one day of the week or multiple days of the week seperated by commas like 'monday, tuesday, wednesday, thursday, etc'.
I want to execute some lines if strWeekday is equal or may contain one of the days in strDeldays. I do not know what operator and what syntax to use for this.
View Replies
View Related
Does anyone know how to convert this peice of
php code to asp?
Quote:
$xxpop= $variable1|$variable2|$variable3|$variable4
I am having problems understanding the ASP equvilent of the " | " bitwise operator.
View Replies
View Related
Basicly I pull the whole column contents and what to test to see if the username is that list. How can I do this in an if statement. I know how to do this kind of thing in SQL (LIKE operator) but I need to test agains two recordsets. Code:
View Replies
View Related
I'm having probs with this sql, I know it's something to do with the LIKE operator. I'm tring to see if there are any instances of a single letter from one field in a comma seperated list in another field. Code:
View Replies
View Related
I have a problem here, dealing with zero.
When i insert into a SQL database a value, say 4.50, through an ASP, it will display in the SQL as 4.5,
instead of the value 4.50 i entered. Therefore, when i retrieved the data from SQL, it will only return and display 4.5
IS there any way whereby i will get 4.50 instead of 4.5?
View Replies
View Related
My error is as follows:
Server.MapPath()error 'ASP 0171 : 80004005'
Missing Path
/raven/aspBoardFunctions.asp, line 19 The Path parameter must be specified for the MapPath method. Code:
View Replies
View Related
We created an asp.net 2.0 app, which sends smtp email using System.Web.mail.
The app is in an IIS 6 application pool isolated to 2.0 apps on a 2003
server.
The app worked fine for a few days; recently however it began failing when
sending to external addresses (it works fine if the recipient is inside our
internal domain).
Comparing the logfiles, I notice when it was working both versions of the
CLR appear in log entries, for example:
(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+C LR+1.1.4322;+.NET+CLR+2.0.50727)
Log entries from when it fails only contain CLR 1.1, for example:
(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+C LR+1.1.4322)
The app is configured to use ASP.NET 2.0. What would be causing that
version to disappear from the log entries (and presumably the app) like
this?
View Replies
View Related
I have code that inserts data into a db.What I would like to now is make sure that all textboxes have been filled out before inserting the data into the db. Moreover, send the user back to the page with the incomplete data, but with the completed data in the textboxes.
View Replies
View Related
I am running Sun One ASP v 4.0.2 on Apache 2.0.x on Win XP Home. I noticed that Sun One Asp doesn't come with components such as AdRotator, Content Rotator, Browser Capabilitles, etc. Is there any way I can install all these components on Win XP Home. For me upgrading to Pro is not an option.
View Replies
View Related
I have a record set with the ItemNo field with the data type as Text. In the record that I have, I want to find the missing number in the series
for example:
1
3
4.1
4.2
5
missing number is 2.
How can I display the missing number in the browser or give me a return value that notifies me that there is a missing number in the series. Is there any function for that? Or how can i do that using a loop?btw im using ASP Classic and MS Access Database.
View Replies
View Related
i've a problem here. everytime a user click on "approve" button, they'll always get database error. and when i check the error log, there are several fields that have missing characters, which results in database error.
for example: the fields for:
1. "refID" (supposely: 1952/102007 becomes 952/10 007 or becomes 9
2/102007)
2 "staffID" (3456 becomes 456)
3. "PONo" (IVT123 becomes VT123)
4. "date" (2007-10-13 becomes 2007-10-3)
and etc
the facts are: Code:
View Replies
View Related
I have a record set (rs) that contains 25 barcodes values that I set to true
in a cookie. (see code section below)
If I read the cookie from within the same page that created it, I see all
25 values. But if I redirect to another page and read the cookie only 18 of
the values remain.
Even though I load the same 25 barcodes at login, the 18 that remain can
differ each time.
If anyone can help figure out why I am missing data in the cookie, I would
appreciated it. The cookie size is only 2k.
Here is the section of code i am using to create the cookie. Hopefully, I
did not make any typos when I retyped it.
while not rs.eof
response.cookies(cstr(rs("code"))) = "true"
response.cookies(cstr(rs("code"))).expires = dateadd("d",1,date)
rs movenext
wend
Here is the section of code i am using to view the cookie.
for each cookie in Request.cookies
if not request.cookies(cookie).haskeys then
response.write "<br>"
response.write cookie + " = " + request.cookies(cookie)
else
for each key in request.cookies(cookie)
response.write "<br>"
response.write cookie + "( "+ key + ") = " +
request.cookies(cookie)(key)
next
end if
next
View Replies
View Related
Is there a way I can test if an image file exists before displaying it?
I have a database that has an image field in it that users enter a filename into. Is there a way for me to check using an "if" statement that the file is actually on the drive before displaying it? ie:
<%okimage=(rsFile.Fields.Item("image").Value)
If okimage='actually on the drive' then%>
<img src='(rsFile.Fields.Item("image").Value)'>
<%else%>
<img src='noimage.jpg'>
<%end if%>
View Replies
View Related
