ASP/IIS Configuration Issue

I think this error that I am receiving is a simple one to resolve.

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

I have downloaded and installed the latest version of MDAC but the error remains.

I am attempting to configure IIS on a different drive ( E:inetpubwwwroot, instead of c:inetputwwwroot ). Could it be that SQL, ASP and IIS just have trouble talking across multiple drives? ( I have sql installed on a third drive ).

View Replies


ADVERTISEMENT

VB Configuration

Hi. We have an old ugly application that uses ASP 3.0.
We had to move it to another server recently (basically by copying it
and setting up in IIS), and as we did, we started experiencing
problems with VB.

The code that somehow worked on the old server produces errors. The
most frequent example is
If Request("ddlFilter") then ....
It worked on the old server, now it gives us a type mismatch error.
Also, the errors about index not being in the collection (such as
recordset column) were swallowed (didn't occur) before and now they
actually occur, overall it's like VB went to "strict mode" or
something.

How do we make it lax again? Rewriting all that legacy code will be a
pita

View Replies View Related

IIS Configuration

I am trying to configure a new site with IIS. I set up the virtual directory.
When I tried to view it, by typing the ip addr. it does go to the index.shtm,
but goes to another page.

Then when I tried to view the index.shm it shows only the html content. It
gives a file not found error for the Virtual Incude (asp ) files. Is there
something to be done to view the virtual include files?

View Replies View Related

Keep The Configuration

I'm using ASP to design a website. I know that I can keep some configurable values, such as Server Name, Database Name and even Login Username and Password in "web.config" under ASP.Net. As to ASP, is there a way like this? I'm curious about where to keep them.

View Replies View Related

ASP Configuration

I have looked everywhere for asp code that would allow me to change the look of my IIS server generated directory listings. Eventually, I would love to change what is listed dynamically based on permissions, and allow uploading in the current directories.

View Replies View Related

ServerXMLHTTP Configuration

We use the following configuration on our development environment:
Server - win2k spk4
Local Computer - win2k spk3

We use the following code on the server to access a page on the local
IIS :

Set objSrvHTTP = Server.CreateObject ("MSXML2.ServerXMLHTTP.4.0")
strUrl = "http://" & strLocalComputer & "/maoz/ShowRecNum.asp"
objSrvHTTP.open "GET", strUrl , false
objSrvHTTP.send()
lngRecNum= objSrvHTTP.responseText
set objSrvHTTP = nothing

When strLocalComputer contains the local computer name, we get the
requested page. But if we use the IP address of the local computer we
get the error :

msxml4.dll (0x80072EE7)
The server name or address could not be resolved.

We manage to run the URL with the IP address from a browser on the
server but not from a browser on the local computer. Any ideas ?

View Replies View Related

Product Configuration

I am trying to create a product configuration tool and I'm not sure where to start. I have made a database with 4 columns..ID, component, compdescription and compcode. There are 8 different componets to configure on the product and the compcode holds the letters and numbers that eventually make up the part number when you make all your selections.

I want to be able to select one thing from each component category and submit to the database which will return a part number. I thought the easiest way to do this would be with 8 different drop down menus filled with all the options for that component category.

View Replies View Related

Flexisearch Database Configuration

i have downloaded the elijathegold's flexisearch coding, but when i create the database and the table DisWords, and change the database connection from

DBConn.Open "YOUR DATABASE CONNECTION STRING"

to

DBConn.open = server.Mappath("/flexisearch/new.mdb")<-line 54

an error message pop up and shown

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Driver Manager] Data source name too long
/flexisearch/flexitestbed.asp, line 54, hope the creator elijathegold or someone else have tried this fleixsearch can help me with this, thx a million

View Replies View Related

Oracle Configuration Files

when I tried to run my ASP,I'm getting an error and to fix it, I need to run the configuriation file.but tnsping is not installed proper it seems.So can any one plz tell me the procedure to regenerate the oracle control files on WinXp?

View Replies View Related

Basic DNS Configuration Question

Everything appears to be (mostly) there, with one significant annoying
exception. I've set up "mydomain.net" as a forward lookup zone in the DNS
console.

I've set up admin and www as hosts, so that I have subdomains: people can
visit www.mydomain.net and admin.mydomain.net without a problem.

I have each of these listed in IIS as host headers entries, so that the
webserver correctly differentiates the traffic. This all seems to work fine.
People can go to http://www.mydomain.net/index.html and they're served a
webpage. Code:

View Replies View Related

Error: The SendUsing Configuration Value Is Invalid.

i am testing the sending email when u submit a form .. but i am getting an error:

<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Email Send"
myMail.From="quince_103@hotmail.com"
myMail.To="qb_103@hotmail.com"
myMail.TextBody="This is a message."
myMail.Send
response.redirect("index1.asp")
%>

the error is:

Error Type:
CDO.Message.1 (0x80040220)
The "SendUsing" configuration value is invalid.
/middle/email.asp, line 7

line 7 is ==> myMail.send
so what shell i do .. ?

View Replies View Related

Formmail :: The SendUsing Configuration Value Is Invalid

Can someone please help with this, I am receiving this error from my simple form:

CDO.Message.1 error '80040220'
.
The "SendUsing" configuration value is invalid

/scripts/formmail.asp, line 19

Here is the asp script I'm using:......

View Replies View Related

Cdonts Using Exchange Server- Configuration

I am having a problem here to send my asp form to my email! I am using CDONTS under w2k and IIS! when i submit the form, all of the message (that suppose to go to my email), went to the queue folder under wwwroot!! nothing appear to my yahoo email also...
that means that my script is working...but only the configuration is need to be adjust here!

the thing is that i dont know how to configure, setup or setting the configuration for Exchange server! since my organization uses exchange server instead of the SMTP!

View Replies View Related

Proxy Configuration Tool - Proxycfg.exe

I wasnt really sure where to put this thread so I have put it in both ASP and DNS forums - i hope this is ok. My problem feels incredibly complicated so Im hoping that someone on one of the forums might know a few things .

Im interested in getting remote data off of a URL using ASP. There is an article about it at the URL below: Code:

View Replies View Related

Sending Email With CDO - The SendUsing Configuration Value Is Invalid.

Trying to send email via a form from my website. Have to use .asp and I have
been round and round the houses trying to get this to work.

On my xp pro system using IIS this works - an email appears in the folder

When it is hosted I get this error message. I understood that I didn't need
to set up any details about the host of the website. Lots of seaches suggest
putting in the smtp address but I am not sure what to do. I have also seen a
lot of talk about CDO.configuration but again despite searching I can't find
out what to do.

CDO.Message.1 error '80040220'

The "SendUsing" configuration value is invalid.

/version1/contact/email3.asp, line 51

Here's a cut down version of my page....

View Replies View Related

The "SendUsing" Configuration Value Is Invalid.

I creade a project where the user was able to sent e-mails it was working ok until I format my PC. After the format i installed again windows 2000 but i beleve is a diferent version that the previuse one and the e-mails now can not be sent the error that i get is that:

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Runtime.InteropServices.COMException: The "SendUsing" configuration value is invalid. Source Error: Code:

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved