I have trouble instantiating a COM object from an ASP
file: Server.CreateObject raises "Access Denied" error.
The COM object is a VB.Net assembly registered for COM
Interop. It can be invoked from a standalone VBScript
file without problems.
I tried monitoring file system for possible access
violations but unsuccessfully. The DLLs are located in a
subfolder of ASP Web application. "Everyone" has been
given full control of them.
I have a password-protected area on my site. I'm not using any server
authentication methods: Instead I prompt the user for a username and
password using an HTML form and check these against a database of
registered users.
I was thinking that this page should be returning a HTTP status code of
"401 Unauthorized" instead of its current "200 OK". My reasoning being
that this would let search engines know what's going on when they
request a protected page and get redirected to the "Access Denied"
page.
I experimented with adding response.status = "401 Unauthorized" to the
"denied" page, but now it displays a (Windows/IE) username & password
prompt instead. The HTTP sniffer shows that the www-authenticate field
is set to "Basic".
My question: How can I indicate to the search engines that the page it
is requesting requires authentication, yet have it not display the
login/password dialog box?
I use the following code to check if a user is an admin in the login page of our intranet.
Set User = GetObject("WinNT://" & UserDomain & "/" & UserName & ",user"
For Each Group in User.Group
Select Case Group.Nam
Case "Domain Admins
Session("Admin")=Tru
Case "Domain Users
Session("User")=Tru
End Selec
Nex
The code works fine on IIS5 and Windows 2000. I have set up a test server with Windows 2003 and IIS6 and created the same application, however the second line of this code returns an error message
Active Directory Error '80070005
General access denied erro
It's obvioulsy a permission issue but I cannot figure out how to get around it.
I tried the coding but it keeps returning an error message:
****************************
Error Type: Microsoft VBScript runtime (0x800A0046)
Permission denied
/JWarner/ForgotEmail.asp, line 33
****************************
Line 33 is the Mail.Send. Here is my code:
<%
if Request.Form("submit") <> "" then
if UsersRS.eof and UsersRS.bof then
response.redirect "EmailFail.asp"
else
Dim objmail, mailbody
set objmail=Server.CreateObject("CDONTS.NewMail")
objmail.From="jwarner53@xxxxxx.com"
objmail.To=Request.Form("Email")
objmail.Subject="Username and Password Request"
mailbody="Username and password: " & vbcrlf
mailbody=mailbody & "Username - " & UsersRS("UserName") & vbcrlf
mailbody=mailbody & "Password - " & UsersRS("Password") & vbcrlf
objmail.Body=mailbody
objmail.Send
set objmail=Nothing
response.redirect "EmailSuccess.asp"
end if
end if
%>
Can someone please tell me what's wrong?
In one of my projects i need to copy one image file to 3 different folders. I have given full folder security permissions to all folders. My application is allowing to upload and moving image files but i am unable to copy a single image file to other foldes.
It is giving permission denied error. note that all paths are correct. There is no path not found or file not found errors.
in the middle of developing a website,i'm practising connection to MS access. my website can display records,but can't manipulate in.why?
View Replies View RelatedAfter someone changed the web server permission, I do not know what he did. I get an error message when I try to use CDO send email.
The error message is: CDO.Message.1 (0x80080005) Access is denied. Does anyone know what cause this and how to solve this problem?
I get the following errors:
Server object error 'ASP 0178 : 80070005'
Server.CreateObject Access Error
The call to Server.CreateObject failed while checking permissions.
Access is denied to this object.
I have registered & installed the COM+ objects in my local machine. Is
it because i have no acces to those COM with my machine username and
password.
I am getting the following error while trying to access an ASP page.
Server object error 'ASP 0178 : 80070005'
Server.CreateObject Access Error
/hypoccs/Report/PFR85.asp, line 15
The call to Server.CreateObject failed while checking permissions. Access is denied to this object.
I am launching, for the first time, on a new laptop, Visual Interdev (version 6.0 SP5). In the "New Project" dialog box, I enter a new project name and click Open. The Project Wizard, Step 1 of 4 asks: What server do you want to use? I type in localhost, and, leaving Master mode selected, I click Next.
A message pops up that says "Contacting Web Server", and then I immediately get an error dialog box: Server Error (Error code = 80070005). When I look on the web for error code 80070005, I see that it has something to do with Access Denied.
i have an asp file with the following source code....
******
Set r_ = Server.CreateObject ("Access.Application.10")
s1 = "DoAnything()"
with r_
.visible = false
.OpenCurrentDatabase "D:SP5DataSPIS_LUPK_Vers.mdb"
sApp = .Eval(s1)
.CloseCurrentDataBase
.Quit acQuitSaveNone
End With
******
my problem is, that the createobject on my iis 15sec. goes....that is not
normally, or ????
what is the problem ? IIS settings ? DComCnfg ?? ASP Problem ??? Wrong
Settings ?
Getting an error using ASP with an Access database on a remote host (I don't control perms).
It's giving this error:
Microsoft JET Database Engineerror '80004005'Operation must use an updateable query. /admin/projects.asp, line 180
Isn't this normally just a permissins error?
The host says they've just given full permissions so it shouldn't a problem, but I want to confirm that this is a perms issue before I get too uppity.
It happens on every INSERT/UPDATE/DELETE that is attempted to be run, and the exact same SQL statements work perfectly on the local machine and network, so my gut instinct is perms.
I searched through this forum to find a answer to my problem but
couldn't find it in any of the forums, so I'll describe the problem and
the solution here.
I am using ASP on SBS 2003 with IIS 6.0 and Exchange 6.5.7226.0. I have
a page where the user can submit a form to send email. I followed
Microsoft's sample code to use either CDOSYS or CDOEX, but I kept
getting error 80070005, which is an access denied message. Here's my
simple sample code:
<%
function sendEmail(to, from, subject, body) {
var iMsg = Server.CreateObject("CDO.Message")
iMsg.To = to
iMsg.From = from
iMsg.Subject = subject
iMsg.TextBody = body
iMsg.Send()
}
%>
Here's what I did to fix the problem: From the IIS Manager, right-click
Default Web Site, choose Properties, then the Home Directory tab.
Change the Application pool from DefaultAppPool to ExchangeApplicationPool.
No more error 80070005.
My ASP-MS Access application works fin in our local server and in our
hosting I get this errors, while adding/editing or deleteing.
When deleting a product: error
Microsoft VBScript runtime error '800a0046'
Permission denied
/webadmin/Products.asp, line 27
When deleting an image from a product: error
Microsoft VBScript runtime error '800a0046'
Permission denied
/webadmin/modify_products.asp, line 21
My hosting company says that its my program error, But I do not think so as
its working very fine in local win 2003 server. Please help me to resolve
this. If this is permission error at the server, what should I do.
I need to use nslookup on an asp page. So I use the sort of code I can see
in the discussion group:
SET objShell = Server.CreateObject("Wscript.Shell")
DIM objExec
SET objExec = objShell.Exec("%comspec% /c nslookup -type=MX "&host)
but I get "access denied" on the SET statement. (It doesn't matter what
command I am using in the shell.)
On the physical IIS application directory Web sharing is enabled
I enable anonymous access
I have full control for the internet guest account.
I have permission for scripts and executables on the virtual directory
application protection low
read write directory browse
I have enabled web sharing for windowsSystem32. (I probably shouldn't have!)
Clearly there is something I have forgotten. But what?
i am trying to write something to an existing file. but i got error msg: Error Type: (0x800A0046)
I have done research on this error, i have change the write permission, setted up IUSR_(my computer name) account in authentication method, unchange the read from the parent folder.
i have done every thing, i dont know what can i do to allow me write something to a text file using asp. I can read the file no problem. here is my code:
I have an ASP page which has commands to access a SQL Server 2000 database. Ex:
rsDatabase.ConnectionString = "Provider=SQLOLEDB;Data Source=xx.xxx.xx.xxx,yyyy;Initial Catalog=ABCDEF;uid=john;pwd=smith"
This line returns the following error:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
1. There is not much load on both the web and sql server and this is the only connection which I'm trying to open with the database.
2. I have tried connecting to the database using the System DSN, but it won't connect
3. On some days and at some times, the page works perfectly with no complaints.
when i run the ip of my web site i get the following error:
HTTP 500 - Internal server error
the log file shows the following error:
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was 'General access denied error '.
I get this error when trying to access a folder created on my IIS FTP server. How do I make this folder accessable? An Error occured opening the folder on the FTP Server.
Make sure you have permission to access this folder.
Details:
550 /<FOLDERNAME>: Access is Denied.
I have a web form to publish data to a ms sql database. Everything works great on my local machine which I use for development. When I uploaded the form and connection file to our web server, I receive the following:
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80004005)
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
/psc/Connections/psc_lms_db.asp, line 5
Here is the connection string I am using: Code:
I wrote a Windows Form Application to query the IIS MimeMap on the localhost which worked fine.
I ran the same code in asp.net and got "Access is Denied" exception. What is the least permissions set I should grant the aspnet account to avoid the exception. Or any other suggest would be fine Code:
I'm running IIS 6.0 with Exchange 2003. One web site that is hosting is trying to use the new CDO method of sending e-mail.
SMTP Service is working fine for Exchange, but for web sites on the same box using code below generates:
CDO.Message.1 error '80070005'
Access is denied.
/test.asp, line 15
Site: http://www.ytr.com/test.asp
Code: ....
I have a windows 2003 server with a "classic asp" application on it with some com Dlls doing the business logic. my problem is when i add these DLLS to component services, all my buttons on my web server start returning the error access is denied. it keeps this
problem if you remove the dlls from component services and restart the server.
I have a proxy on the intranet, I try to send an xml to an external url, in classic asp, using WinHttp.WinHttpRequest.5.1, but I get access denied from proxy for sending the xml and also The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. Code:
View Replies View Relatedafter moving my ASP website that uses ACCESS DB from server A (win2003 with IIS6) to server B (win2003 with IIS6),the hebrew records that the ASP code pulls from the database appears as asteriks marks (????? ??).
on the old server the same code shows good hebrew characters but on the new server it doesn't. what should I configure or change on the new server so hebrew characters will shown well. the new server has hebrew installed and configured at "regional languages and settings"
maybe this is something with downloading and uploading the .MDB file ?
The setup:
Access database of vendors. A vendor can offer one or more services.
ASP page provides user a checkbox of services. User clicks one or more options and submits. The database should return all vendors that match the services selected.
No dice. I can of course easily pull up vendors that match one service. But the multiple options are treated as an AND search. I don't want to find only vendors that provide all the services checked, but all the vendors that provide one or more of the services selected by the user.
I have tried stored procedures in Access and SQL statements. I either get data type errors or nothing found.
In my site one page, named "category.asp". I send category id by query string, to show related categories. like: "category.asp?cid=2"
Now problem is that, when i see page "category.asp?cid=2", it executes successfully, but in the middle of page is see this error message <b>"HTTP/1.1 401 Access Denied Content-Type: text/html Date: Tue, 03 May 2005 20:26:06 GMT Connection: Keep-Alive 401 Access Denied. LANGUARD RESTRICTED OBJECT. completion addition to fulfillpacket size the EnD"</b> and after that error, page executing suspends.
It is the problem with only one category "category.asp?cid=2" and all other categories runs successfully, like "category.asp?cid=1" or "category.asp?cid=3".
I'm trying to add a user to active directory using ASP and am receiving the
following error:-
Active Directory (0x80070005)
General Access Denied Error
Does anyone know how to get round this problem?
We had a web site that works in windows NT very good with a DB in Access. Our clients migrate to Win 2000 and now the connection to the DB doesn't work ... the error is this:
Error: Access is Denied.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
/directory/progs/utils.inc, line 17 ...
I'm Running IIS and have the Db "file.mdb" in the root directory. I'm running on windows 2000 Pro and i'm having trouble connecting to the db. the code i'm using is:
<%
dim conn, rs, sql
set conn=server.createobject("ADODB.Connection")
conn.connectionstring = "DRIVER=[Microsoft Access Driver(*.mdb)]; DBQ=" & Server.CreateObject("file.mdb")
conn.open
But it doesnt work.
I have http://localhost/myweb1 who redirect me to my pages. I would like to have http://localhost/myweb2 which I would like to use the same exact set of pages, except a different global.asa (application data will be different).
If I duplicate pages, that is not a problem, but I would prefer not to duplicate them.
My form has mixed fields in it, one of them is a file field for picture upload when i submit my form via method="GET" i can retrieve my form data with Request.QueryString() method but as then I loose my file, but as soon as I switch to method="POST" and use Request.Form() method i get nothing unless I remove enctype="MULTIPART/FORM-DATA" at which point I loose mi file also... What is causing this? is there a different enctype i need to be using?
View Replies View RelatedI want to use the POST method to submit the form and then grab the
parameters in the asp file with request.form("parm").
The problem is that I am using the _search target to open the asp
page.
When I use _blank target there is no problem, either I use GET or POST
method.
But when I use _search target, only GET method works. Code: