my application i put on server1(webserver) and my data i put on server2(*.doc and *.pdf). when user access my application on server1 than i show my data on server2.
Ip on server1 is public and IP on server2 is private . how to configure between two server at above ?
In a site that has about 4000 products, in 1000 categories, I thought that I can store each product and category details in its own application("var"), instead of trips to the database.
When someone will go to product.asp?id=123, the page will show the application("product123") instead of getting the information from the database. If a change of pricing or availability occours, I will delete the application("product123"). The product.asp will check if it's empty. If it is, it will get the data from the database and show that, but the next time someone goes to that page, there is no need to connect to the database.
`The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance.`
When I browse to HTTP://localhost/defacult.asp, it shows the message:
Server Application Error The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance.
I currently enccountered the error given above and I have checked the net abt the possible cause of this. I read about setting the write permission to "Everyone". You see, I was trying to insert a record in an Access table. And before I got the "Server Application Error", I received the "please use an updateable query.." or something to that effect.
Could someone please give me a clearer explanation on this? coz I cannot even see the Security tab being mentioned. I am using Win2k Pro as my webserver.
my web server(XP+IIS5.1) can't run any ASP page, even if a blank ASP document. When I try to open the document the browser displays the error message below: Server Application Error The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance.
IN VS.NET: The web server reported the following error when attempting to create or open the web project located at the following URL: 'http://localhost/webapplication1. 'HTTP/1.1 500 Internal Server Error'.
IN BROWSER: Server Application Unavailable The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
I had service pack 2 installed. Tech guy uninstalled it (said it conflicted with Novell) and then I reinstalled Framework 1.1 now I get these errors. I set show friendly HTTP messages in the browser unchecked to show error messages. Also got show error messages in IIS.
fter Installing IIS on a WinXP Pro machine, I have copied one of my web site files to test it on that machine.
I have created a virtual directory, and when I try to access the site on http://localhost/website. When I try to load any ASP page, I get the following error:
"Server Application Error
The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
Checking the event log I have an error and a warning: Code:
I have to manage a windows server with 20 domains. Some have .asp-pages, some not. I dont have programmed this pages. The server was new installed (on puretec), the scripts and some other stuff to.Now, the server is running, but sometimes on all asp-pages there, become an error:
Server Application Error The server has reached the maximum recovery limit for the application during the processing of your request. Please contact the server administrator for assistance.
What does it mean? What can I do to find the error? I have search on some newsgroups und have found out, that one asp-Skript take to many ressources and "shoot out" the service. But I don't know what script in which domain?
i need to make an asp page work and what it tells me is "Server application error The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
I use to always be able to view my local ASP pages at http://localhost, but a few days ago, it started giving me the following notice: =================== Server Application Error The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance
I assume that something is up with IIS, but I don't know where to look. It happens on each and every ASP page I try to view. I haven't changed anything, haven't put up any Microsoft patches or anything. I suspect spyware. I run the usual anti-spyware/adware programs quite often, and catch one or two items just about every time. That dang Winfixer came in a couple weeks ago, and it was pretty nasty, but I digress.
i am very new to asp, i am able to test and view asp pages when i am at work, but the moment i work at home, my asp pages cannot be viewed, and i get this error:
Server Application Error The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance.
it refers me to an event log, but i don't know where that is exactly, so i'd know more details as to what is causing this problem and look into it more precisely. any direction as to what i can do next to solve this problem or even what's possibly causing this problem.
I just reinstalled my Windows XP Professional and I can't seem to make IIS work on my local ASP application. I have setup many times IIS and configured it to work properly, but now after the new WinXP setup I receive the message:
"Server Application Error:
The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information.
i want to run an application...from the intranet site a client presses a button and the application opens in the server...how can i do this ? any ideas ???
My boss told me web application is NOT client-server application. I argued with him because browser is the client, and the server code put in server. Then web application should be a client-server application. My understanding is that a web application is an application that runs on a browser. But client-server application is not necessary a web application.
My website connects to a remote sql server. Application works fine when I run from Visual Studio. But when I run the site from IIS, it shows an error.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I am using Application.lock to protect a reference to a COM+ object while calling Server.Execute() to another ASP page. I am doing this to pass the object's reference to the other page, and I CAN'T rely on the session object.
Is this a safe way to protect the object reference? i.e. does the Application object remain locked when calling Server.Execute()? .....
I have made a page to display a chart based on data from my SQL-server. I have used Office Web-component graph. Here I can set the correct SQL statement and the graph works fine.
Now I want the user to be able to input the WHERE part of the sql sentence. Can anyone point me to info or code on the web to do this ?
I want to count number of data available depending upon the conditions in the large database the database table rows are approximately 3 lakhs and there are multiple table to be searched and records need to be displayed in ASP pages.
Kindly suggest the best scripting method as i am always getting error like "Script Time Out" Error in Active Server Pages (ASP)
please suggest how to avoid or in sql server i can create some pre defined script and just call from asp pages
I want to export data from SQL Server Database to Access Database through ASP code.
Will it be by running some sort of a batch file?The database structure of both the databases are the same, only there are 3 fields more in the SQL Server DB than the ACCESS DB which need not be exported.
Is there a way to get data submitted to the server without using a form? At the moment I have a very complex form that takes a very long time to load (about 30 seconds), and at intervals I want to send save commands back to the server so that the dynamic information on the page can be saved. The problem is that if I do it the normal way it's frustrating for the user because they have to wait another 30 seconds for the page to reload.
I've also tried using a hidden IFrame and submitting that, but it slows the page's initial load down even more and is causing a bit of an administration nightmare. Also, the program stalls while it waits for a response (success/failure) to come back to the client.
i am trying to insert utf-8 data into ms-sql server using asp. i created an input box from where other charater (like chinese,japnese) will be inputed and should store it in sql server.and it is inserting it as some junk characters in sql server. but When i tried to display it in browser it is not displaying properly. in asp page i wrote this
session.codepage = 65001 response.charset = "utf-8" ' INserting goes here
Any ideas on how I can set some data in 1.asp, then have 1.asp do a server.transfer (or .execute, come to that) to 2.asp, and have 2.asp access the original data?
I'm aware that the Session object fits the bill but want to avoid using this if I can. Having said that, the nature of the data is very much per-user so things like the application object are definitely inappropriate.
Another way I can do this is redirect/querystring, but the additional roundtrip here is not attractive.
I'm trying to write data from a form using a text box (textarea) that has a return after each item. For example:
Join Bytes! Join Bytes! Join Bytes! Join Bytes!
I'm getting the data written to the SQL server table fine, but every item after the first is getting written with a special character preceeding the email address that looks like a little box. What is it, why is their there and how do I remove it?
I have a table with 30 or so columns. I'm pulling the data and putting them into variables like so:
objRS.Open query, db UserID = objRS("UserID")
That's obviously not including the db conn info or even the query itself. Rather than manually typing out each and every variable and pulling the data from the RS object, is there a function that will automatically store all the data from the RS into its respective variable? I'm basically just lazy and the carpal tunnel kicked in after 10 or so variables.