I am getting an error saying that the buffering is off when to my knowledge it is on.
Hope someone can help. Here are the details: Code that is causing the error-
response.flush
response.end
I tried adding-
response.buffer=true to the top of the page but this did not help.
I then set enable buffering check bax to checked in IIS.
The exact error I am getting is:
Response object error 'ASP 0159 : 80004005'
why is it really necessary to enable buffering to create cookies? I read the MSDN topics about response.cookies and response.redirect and there is no line saying that response.buffer = true is necessary.
I have an issue where I am sending back xml content using ASP. When I flush the buffer or turn the buffering off their seems to be a end tag that gets appended to the end of this response. Code:
Invalid ProgID. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp. /CoxAxis/adminEditPage.asp, line 6
My code:
<% dim self, pid, i, c self = Request.ServerVariables("URL") pid = Request.Querystring("pid") set Session("pageContent") = Server.CreateObject("Scripting.Dictionary") Set custObj = Server.CreateObject("NFIFunctions.ValidateField") Line 6 set psi = Session("pageContent") set errDict = Server.CreateObject("Scripting.Dictionary") i = 1
Let me start by saying I'm fairly new to Asp coding. That said...
My ISP only uses AspSmartMail. I've created an online form that uses fill out, which is then e-mailed to the collector of the information and CC-ed to the person who submitted the information.
The error I'm receiving is this: aspSmartMail.SendMail : Error 28 error '8004001a' 504 Invalid Username or Password
In my script, I've Dimensioned several items, as you'll see below, passing the authenticating username/password to the smtp server, but it's not working. I tried not passing the information by entering in the actual info without it being passed by the diminsioned items. This didn't work either. I of course verified that the username/password I'm usine is correct.
Can someone plase tell me why I can't authenicate? I would really appreciate any help that might be out there.
Relavant Asp code below: ----------------------------------------- Dim smtpserver,youremail,yourpassword,yourusername,rem oteemail
I have a database driven (ms access) website which runs fine on my computer (win 2000 iis6). However, on uploading, some pages am receiving the following error
"An Unknown script error occured while processing your request."
I am testing a new website I built on the actual server. My section for uploading documents seems to be giving me problems. Can someone help me please? This is the error I am getting:
Microsoft JET Database Engine error '80004005'
'c:logindatairb.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
This New Company I'm with Sets their Default WebSite to a local Directory on "D" Yea I've been down the whole route reinstalling XP Pro,,, IIS 5.1 The .NET framework everything. Now I'm just frustrated.
What the Heck !! Theres a web project (C# ASP.net) in the solution containing many many some odd 19 or so projects. MSVSS is additionally in the picture to make things a little more complex. (I.E. the non web projects go elsewhere on the D drive) All I'm asking for here are the BASIC Settings to get my DEV environment and my IE to "SEE" this D:Web folder as Localhost. It worked for a sec. A very brief second. Then it was Gone. Specific ERROR:
Could not load type 'appname.web.Global'. Parser Error Server Error in '/' Application.
My text file, dsn file, and asp page are all in the same directory on the web server.My problem is that I want the text file to be on drive U: (which is each users drive)When I do this I get the following error (even if I copy the dsn file to the U: drive):-
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Text Driver] '(unknown)' is not a valid path.Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
I'm getting the following error on one of the servers I maintain:code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[MySQL][MyODBC 5.00.11][MySQL] 2006 MySQL server has gone away
Always occurs when the MySQL server it connects to restarts, which is hosted on another box. Nothing but an IIS restart fixes it.Is there anything I can do to get ASP to automatically pick-up the connection, or force a reconnect? I'm not an ASP coder, so a little hand-holding would be nice (don't worry, I won't kiss you).
I am getting this error after uploading an asp search page and attempting to search an MS ACCESS database.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x7d0 Thread 0x340 DBC 0x2870cd9c Jet'.
I've researched the error code online,and it seems to be server-side,but a lot of the server talk is pretty much Greek to me.
I had developed a messageboard in asp which allows users to post new messages,reply to existing messages.I am using textarea (Html tag) for a messagebox in my asp page .When the user enters any characters in messagebox except a single quote ('),the message gets inserted in oracle database without any problem.But if message contains single quotes (') , while inserting in a database it gives the following error
"Microsoft OLE DB Provider for Oracle error '80040e14' ORA-00917: missing comma ".
Is there any solution to insert messages containing single quotes in a database?
My asp run smoothly before. But, now, I found the ASP page is not smoothly recently. Sometime if the ASP is requested to connect to Access, the page will prompt
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xdd8 Thread 0xae0 DBC 0x3a85074 Jet'.
I tried to display an error detail on my webpage when I got an "HTTP 500 Internal Server Error" of my .asp page, but I was failed I did setup in IIS so it will display debug error on my asp page as well as setting up my browser internet option.
Can you help me how to set it up so I am able to see the error detail on my browser when I get "HTTP 500 Internal Server Error" ( Currently, I just got a blank page with "HTTP 500 Internal Server Error" in the web page title)I run IIS 5.0 and window professional xp browser.
I need help figuring out this Microsoft OLE DB Provider for ODBC Drivers error '80004005' error.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
register.asp, line 115
I created a simple registration form. It works for me but when i uploaded to a remote server...it doesn't work any more. The host said he made a System DSN connection to the registration.mdb database. Code:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005) [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query. /changeprofile.asp, line 44
Last night, 6 pm dedicated windows 2000 server rebooted and ever since I get an error with all my sites on that box that says:
ASP Error occurred 8/16/2005 10:39:16 AM in Microsoft JET Database Engine
Error number: -2147467259 (0x80004005) File: /demo3/funcs.asp, line 100 Unspecified error
The funcs.asp is the file that opens the access database to read from. I have tried all sorts of things to fix this and I need your help. I searched for this error but can't find any more than people having the problem.
Microsoft OLE DB Provider for ODBC Drivers error '80040e10' [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
This error occurs at line 51, I have checked the line:
rsGlobalWeb.Open SqlJunk, dbGlobalWeb, 3, 3
There are 2 parameters already. So, I do not understand why the error keeps stating that I have too few parameters, and they expect 2, which I already have.
I am accessing the same error-containing ASP page on an ISP server using w2k IE6 but with different effect. On the first computer I get several line of HTML outputed by ASP, shown correctly by the browser, followed by a descriptive error message:
Microsoft VBScript runtime error '800a000b' Division by zero
followed by the number of the error-making line. On the second machine my HTML is not displayed at all. Instead I am getting that meaningless error page sayng that The page cannot be displayed, HTTP 500 - Internal server error. How can I get the second computer be more informative about the errors?
I am working on a project using an access db. Here is the problem.
Error Code: Microsoft OLE DB Provider for ODBC Drivers error '80040e14' [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'unit=6400s' Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code: sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
well i m developing application in asp when i want to access these pages from ie5 it shows error HTTP Error 403 - Forbidden in internet explorer http://localhost/Mail/email.htm .
I had an asp mailing list that sent a message to a text file of recipients, which worked beautifully until the powers that be upgraded servers on me and didn't tell me how my components would be effected. The original script used CDONTS, now replaced with Persits ASP Email.
I have recently transferred an update asp page from my local test environment (System 1) to another environment (System 2), and get this error message:
ADODB.Recordset error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal.
/user_admin.asp, line 40
Here is the deal:
1. Both systems have the same setup (Access db, etc)
2. On System one, the page works perfectly.
3. All the other files from system 2, which are identical to the ones on System 1, work perfectly.
4. In fact, I use the same code (for user authentification) in ALL my pages on both Systems 1 and System 2. They also work, except for the one script which I recently tranferred.
I thought this is more of an IE issue but i've had no joy on that group perhaps somebody here will have a clue.
If i click a link to a web page embedded in Excel (97 OR 2000) i get the standard error page displayed by IE (you know, the 'cannot find server or dns error' page).
Turning off 'show friendly http error messages' alleviates this. (Unfortunately this is the Windows default setting!)
