Here's what i'm trying to do, send out an email that contains both text and html with the mime encoding that will let the user's client display what they support. This email will be an external file.
This is how i'm reading the two files: Code:
I am using CDONTS object to send emails to a person when he is registered with the web portal,but the problem is the mail is getting filtered as a spam or junk mail, and does not land in the Inbox,how to send this auto generated email into the inbox and not as a spam or bulk mail.
View Replies View RelatedI have a web form and I want to generate 2 different emails (not CC's) from it. One with all the information to go to the client, and one to go to the customer with half the information.
Can anyone tell me how to do this using CDONTS?
I'm sending Russian text in an email generated from the website which displays in the email as ??
The website is set to codepage 65001 and the charset to utf-8.
I know this question is stupid. But i need some advice for this. I
am trying to develop a website, which will allow the user send to order form
to the admin email. I am planning to use the CDONTS component method.
Can I just to localhost server to test, whether the form can be send
up to the admin's email. Or I must have the Hosting server to do that. Can
Anyone suggest me, how to I test my scripts can be successfully run (at
localhost), before I host it on the Web Servers.
For some reason, the email scripts on my web site can't send emails to
Hotmail accounts. No error is generated, but no email is sent either. I've
done some searching on this matter, and it appears as though I'm not the
only one having this problem, but I have yet to find a solution :(
Below is my CDOSYS script that was *supposed to* resolve the problem by
passing the SMTP server's along with the email, but it doesn't work :(
Have any of you had success with sending emails to Hotmail accounts via CDO?
I don't have control over the server's setup because it's a hosted account...
I want to use a simple CDONT mail script to allow the administrator of a site to send an email blast to their users. there are approx 1600 emails in the MS SQL db table. I would like to parse the entire email address column and get a variable that is all the email addresses separated by a comma so that the form picks it up as all the emails in the 'bcc' field as in the eg. below..I know there has to be an easier way but I want to get these guys up and running.
<%
objCDO.To = "Recipient@oursite.org"
objCDO.From = "mailer@oursite.org"
objCDO.bcc = "$variable_of_all_email_addresses"
Dim txtSubject
txtSubject = "Insert comments and case info here"
objCDO.Subject = ""***ATTENTION*** NEW CASE - MISSING CHILD"
objCDO.Body = txtSubject
objCDO.Send
%>
I am trying to send out an email newsletter using both HTML and plain text?
Any good resources for doing this? I can't seem to get it to display the
TextBody when Outlook is set to display emails using Plain Text.
I am using:
Dim objMail
Set objMail = Server.CreateObject("CDO.Message")
objMail.To = varEmail
objMail.From = "webmaster@imysite.com ( Webmaster)"
objMail.Subject = "My Subject"
objMail.BodyPart.ContentMediaType = "multipart/alternative"
objMail.TextBody = "No HTML here. I want this text to display if HTML is
turned off."
objMail.CreateMHTMLBody "http://www.mysite.com/mailer.html"
objMail.Send
Set objMail = Nothing
When I receive the email in outlook with HTML turned off, it comes up a mess. I was hoping the TextBody would show. Also, the images I am using have full paths (http://www.mysite.com/image.jpg) but they are still showing up as attachments with odd names like ATT21435.jpg.
I have a form that triggers the sending of an e-mail via CDOSYS. I'd
like to make this a nice HTML-formatted multipart message, but for some
reason the text version is coming through blank.
Originally I thought I had read that CDO has an automatic text converter
that will turn the HTML code into a plain TEXT message, but when that
didn't work (and I couldn't find anything further about it), I added a
custom text line like this:
objMessage.TextBody = "This is the text body."
objMessage.HTMLBody = "This is where I put the long HTML code."
objMessage.send
That worked in my mail client (Thunderbird), but the messages still go
blank in my wife's Hotmail account (actually, if I send it directly to
her hotmail account they don't arrive at all; if I send it to her other
address that forwards to her hotmail account, they come in, but the body
is blank).
"Cannot use Request.Form collection after calling BinaryRead"
I get this message cause I have a form that inputs two types of data: a file to upload and a field value to save in a datasource. The encryption is "multipart/form-data". The file is uploaded successfully, but, how can I invoque the fields of the "request.form" without getting this error?
Is it possible if i wanna append xml data and upload picture at a same time using the same form?
The problem i'm facing now is, when i add the 'multipart/form-data', i can't append the xml data
I know there's one solution, using 2 FORM but the project i'm doing now is designed to be put them both (file type for upload and textarea for append) together
Besides, i have no idea how to encode or decode the posted data.
How to send the HTML and Text email at the same time?CDONTS only send one type of email at one time and we should know before hand what type of email the client can receive. In my case i want to send both and depending on clients email reader the right one should show up.
I have used ASP email component also but for this component to work properly we should have relaying enabled on our SMTP server.Due to the threats of SPAM i dont want to do this. I am not any demanding here but simply trying to find the better way
i have created a registration page containing a form than sends username password to an asp processing page. If the user exists it sends the user back to the registration page with server.transfer command otherwise it adds the new user to the database as expected.
Anyhow I now want to add an upload feature to the registration page (using pure-asp). The example I used says that the form Enctype property should be set to mulipart/form-data.
Now when I add a new user via the registration form, the processing page for some reason assumes the user is already registered (BUT IS NOT IN DATABASE) and the server.transfer code is executed ? sending the user back to the registration page.
can anyone post or direct me to a code snippet for sending a plaintext/html mutlipart email using CDOSYS? I can do basic code, but this is way beyond me. If a user enters html into a form, is there a way for code to strip that out and leave only plaintext behind?
The idea is that a user would fill in one html field, the form would email it in multipart, with one part using the html the user entered and the plaintext part using the same info but with the html code stripped out.
I have a form which uses the encode type "multipart/form-data". How do you parse and iterate through the form field collection once the binary read method is used?
View Replies View RelatedIf I'm using multipart/form-data as the enctype and the action is the same page how do I check if the form has been submitted? Usually I'd use something like this:
Code:
if request.form("input_submit") = "Save" then
' Process the form ...
end if
I am using VB 6 and ASP to upload files to the web server in one of my web applications. The architecture is something like this...Thin ASP/html front end using multipart/form-data when user selects the file and clicks on upload a COM object is being called to upload file.
This works absolutely fine when dealing with file sizes in b/w 1 to 15mb....Now users are trying to upload huge file sizes such as 80mb/100mb. the web application dies without uploading the file....hence was interested to know if there is any size restriction for this???
The COM object is written using ASP Scripting library, MTS scripting engine, ASPSOFT upload....references.
I am trying to upload a file . In my asp page I have enctype='MULTIPART/FORM-DATA'. for my form. Problem I am having is that I have some hidden variables in the form which do not pass through when that form is submitted. how to pass the values of hidden variables with enctype='MULTIPART/FORM-DATA'.
View Replies View RelatedI have a form (which is multipart/form-data) it has a file field and a select. When i submit this form i can get the file but i can't get the value of the select? any ideas?
View Replies View RelatedI am facing one problem while uploading images in ASP. I am using ASPUpload to upload the file. I can upload the files also. for that I am giving the Encription type as multipart/form-data. THat time I am not able to get the other informations in that form like some hidden fields inthat form.
Is it possible to get the information when we were uploading the images. I am using post method for uploading.
How to send the HTML and Text email at the same time? CDONTS only send one type of email at one time and we should know before hand what type of email the client can receive. In my case i want to send both and depending on clients email reader the right one should show up. I have used ASP email component also but for this component to work properly we should have relaying enabled on our SMTP server. Due to the threats of SPAM i dont want to do this. I am not any demanding here but simply trying to find the better way.
View Replies View RelatedAn application is logging faxes sent in SQL2000 image column type. I have
found code on the net but what it is doing is prompting to save to local
which is fine for single page image. Not good for multiple page faxes. I
have not been able to locate an example to load in the browser or how to
handle multiple image in the one column. Code:
I'm trying to setup an ASP page to POST an image across to another page- essentially simulating what a browser does when you use <input type=file> in a HTML form.
I'm able to correctly setup the headers etc and do the POST, but I'm unable to include the binary data of the image.
The only way i've been able to do it is if I base64 encode the image. I'm using MSXML2.ServerXMLHTTP to do the POST, and I can't seem to do the .send with a form body that includes the binary data of the image. Code:
I am near to desperation as I have a million things to get a solution
for my problem. I have to post a multipart message to a url that
consists of a xml file and an binary file (pdf). Seperately the
posting words fine but when I want to create one multipart message
with both then things go wrong.
The binary file is converted and of datatype byte()
The xml file is just a string.
I don't know how to merge these two into the multipart message. I have
tried converting the binary to string and then concatenate but that
doesn't work as it seems to leave off the last part of the file and
the boundary.
I am using an asp page (upload.asp) to gather information and to upload
files to the web server using SoftArtisans SAUpload Tool. In the first page
(upload.asp), I have a form for gathering info with the following: Code:
Anyone want to give me any pointers as to how to send emails from asp?
View Replies View RelatedWhat is the best option?Im writing a forum so i need a universal solution...
This means i cant use something like ASPEmail as not all ASP servers have this.
So what do i use? Someone suggested to me CDONTS but then said you have to set up the server or something.Do all web servers have this pre configured.
Is there any way we can send off an email from a web hosting server that does not support CDONTS and cannot register any components to their server. They have no SMTP server as well.
IS there any web site that supports any one of these for FREE or better yet is there any other way to send off an email without CDONTS and components? Is it possible to like redirect to another mail with just scripting?
Appreciate any response to this matter.
I am trying to complete a file upload form and I am getting very close (at least I think I am). Part of my process is that I want to display the file location back to the user after the file is uploaded.
So here is what occurs.
-I have a from that has the encType="multipart/form-data" as part of the form (it is doing a post). -In the next ASP page, I try to view the contents of the INPUT TYPE=File by using Request.Form("txtFileLocation"). The problem is that when I display this value it is blank.
This is part of a file upload process so I think I have to use encType="multipart/form-data", correct? Then assuming I have to use the encryption or assuming it is wise to, how can I retrieve the path the user entered in the previous form in the txtFileLocation?
I tried this without encType="multipart/form-data" and then I was able to display the path entered but the way I understand this is that it is required for the file upload process or at least it adds security.
I have a basic file upload form.
<br><br>
<FORM METHOD="post" ACTION="uploadaction.asp" enctype="multipart/form-data">
<table>
<tr><td><b>Image</b></td><td><input type="file" name="UploadFile"></td></tr>
<tr><td colspan=2 align="center"><input type="submit" name="upload" value="Upload"></td></tr>
</table>
</form>
what exactly does the enctype="multipart/form-data" do? I'm having trouble getting the request.form("UploadFile") to work with it, but it has to be in the form for the file upload to work. Is there a way to "undo" this once it makes it to the action page?
I have a stored procedure which sends out an email to all the users
listed in the database. for some reasons I am not getting all emails.
could someone offere some assistance? Code:
I am using ASP to send order confirmation emails to customers. However i want the emails to appear as HTML in the emails.
I have Successfully done this but i need to know how to attach CSS to the emails, so that it can look exactly like the html page i design.
I am using the CDONTS.Newmail component with the .body attribute.
I am working on a piece of software that needs to store email data in a SQL server table. Been flicking around and it looks like the ASP mail components are a good way to go. Basically I will be recieving mails from a pop3 server (prob outlook) and using the same program to put the data in a database.
View Replies View Related