I'm running IIS 6.0 with Exchange 2003. One web site that is hosting is trying to use the new CDO method of sending e-mail.
SMTP Service is working fine for Exchange, but for web sites on the same box using code below generates:
CDO.Message.1 error '80070005'
Access is denied.
/test.asp, line 15
Site: http://www.ytr.com/test.asp
Code: ....
I have a proxy on the intranet, I try to send an xml to an external url, in classic asp, using WinHttp.WinHttpRequest.5.1, but I get access denied from proxy for sending the xml and also The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. Code:
View Replies View RelatedI've set up a website contact page which uses CDOSYS to send form details to an email address.
However, the domain is set up such as the client is using their own mail server, and using my server only to host the website.
Ordinarily I would set up hosting with email and change the nameservers of the domain to point to my server, but in this case the client is keeping the nameserver details the same, but just updating the A record to point to my server to display the website.
Trouble is, the CDOSYS email doesn't seem to work with this set-up. Do I need to hard code their mail server IP somewhere to get it to work?
I put the following code into my mailer: Code:
if objIndexMail.Send then
Response.Write("Mail Sent")
else
Response.Write("Failure. ")
end if
and it's coming up as Failure every time. Is there a way I can see the status of the .Send command, and why it came up as a failure? no errors are being generated, it's just not sending..
I am running Win XP and have installed the IIS SMTP service, however I'm not sure what I need to do to configure both the SMTP service and CDOSYS properly to allow me to send out email from an ASP script.
THE PROBLEM:
What is happening is the email is not sent and goes to the 'c:InetpubmailrootQueue' folder. I have checked the event viewer and the error I receive is:
Message delivery to the remote domain 'yahoo.com' failed for the following reason: The remote server did not respond to a connection attempt.
I believe the SMTP service isn't setup correctly or I haven't configured CDOSYS properly in my ASP script.
The CDOSYS part of my ASP script is setup as follows (I am using Javascript with ASP btw):
Code: .....
I have a CDOSYS mail and it's working ok but it sends plain text massage. But i want to send with images and links. But when i put a link with image in the .HTMLBody field like <a href="http://www.mysite.com/"><img src="file:///C:/My Documents/image.gif" border="0"></a> so, i got an error message.
Microsoft VBScript compilation error '800a0401'
Expected end of statement
/cdo/cdosys.asp, line 41 .....
I am trying to get a asp-mailer setup that will send a specified attachment.
I have tried both CDONTS and CDOSYS methods ... both are giving me headaches.
And the best part is how incredibly helpful the error is: (Sarcasm Intended)
Error Type:
(0x80004005)
Unspecified error <-- They should change that error to ... "Good Luck!"
/knowledgetree/emailer-drivers.asp, line 90
I hilighted the above line in the code as well.
Here is the code I am working with: Code:
What I am trying to do is to upload 4 files to my server (Windows 2003 Server Edition , IIS 6.0) and then e-mail them to my e-mail account. I use 2 files. The first is uploadTester.asp...
View Replies View Relatedin the middle of developing a website,i'm practising connection to MS access. my website can display records,but can't manipulate in.why?
View Replies View RelatedAfter someone changed the web server permission, I do not know what he did. I get an error message when I try to use CDO send email.
The error message is: CDO.Message.1 (0x80080005) Access is denied. Does anyone know what cause this and how to solve this problem?
I get the following errors:
Server object error 'ASP 0178 : 80070005'
Server.CreateObject Access Error
The call to Server.CreateObject failed while checking permissions.
Access is denied to this object.
I have registered & installed the COM+ objects in my local machine. Is
it because i have no acces to those COM with my machine username and
password.
I am getting the following error while trying to access an ASP page.
Server object error 'ASP 0178 : 80070005'
Server.CreateObject Access Error
/hypoccs/Report/PFR85.asp, line 15
The call to Server.CreateObject failed while checking permissions. Access is denied to this object.
I am launching, for the first time, on a new laptop, Visual Interdev (version 6.0 SP5). In the "New Project" dialog box, I enter a new project name and click Open. The Project Wizard, Step 1 of 4 asks: What server do you want to use? I type in localhost, and, leaving Master mode selected, I click Next.
A message pops up that says "Contacting Web Server", and then I immediately get an error dialog box: Server Error (Error code = 80070005). When I look on the web for error code 80070005, I see that it has something to do with Access Denied.
I searched through this forum to find a answer to my problem but
couldn't find it in any of the forums, so I'll describe the problem and
the solution here.
I am using ASP on SBS 2003 with IIS 6.0 and Exchange 6.5.7226.0. I have
a page where the user can submit a form to send email. I followed
Microsoft's sample code to use either CDOSYS or CDOEX, but I kept
getting error 80070005, which is an access denied message. Here's my
simple sample code:
<%
function sendEmail(to, from, subject, body) {
var iMsg = Server.CreateObject("CDO.Message")
iMsg.To = to
iMsg.From = from
iMsg.Subject = subject
iMsg.TextBody = body
iMsg.Send()
}
%>
Here's what I did to fix the problem: From the IIS Manager, right-click
Default Web Site, choose Properties, then the Home Directory tab.
Change the Application pool from DefaultAppPool to ExchangeApplicationPool.
No more error 80070005.
My ASP-MS Access application works fin in our local server and in our
hosting I get this errors, while adding/editing or deleteing.
When deleting a product: error
Microsoft VBScript runtime error '800a0046'
Permission denied
/webadmin/Products.asp, line 27
When deleting an image from a product: error
Microsoft VBScript runtime error '800a0046'
Permission denied
/webadmin/modify_products.asp, line 21
My hosting company says that its my program error, But I do not think so as
its working very fine in local win 2003 server. Please help me to resolve
this. If this is permission error at the server, what should I do.
I need to use nslookup on an asp page. So I use the sort of code I can see
in the discussion group:
SET objShell = Server.CreateObject("Wscript.Shell")
DIM objExec
SET objExec = objShell.Exec("%comspec% /c nslookup -type=MX "&host)
but I get "access denied" on the SET statement. (It doesn't matter what
command I am using in the shell.)
On the physical IIS application directory Web sharing is enabled
I enable anonymous access
I have full control for the internet guest account.
I have permission for scripts and executables on the virtual directory
application protection low
read write directory browse
I have enabled web sharing for windowsSystem32. (I probably shouldn't have!)
Clearly there is something I have forgotten. But what?
i am trying to write something to an existing file. but i got error msg: Error Type: (0x800A0046)
I have done research on this error, i have change the write permission, setted up IUSR_(my computer name) account in authentication method, unchange the read from the parent folder.
i have done every thing, i dont know what can i do to allow me write something to a text file using asp. I can read the file no problem. here is my code:
I have an ASP page which has commands to access a SQL Server 2000 database. Ex:
rsDatabase.ConnectionString = "Provider=SQLOLEDB;Data Source=xx.xxx.xx.xxx,yyyy;Initial Catalog=ABCDEF;uid=john;pwd=smith"
This line returns the following error:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
1. There is not much load on both the web and sql server and this is the only connection which I'm trying to open with the database.
2. I have tried connecting to the database using the System DSN, but it won't connect
3. On some days and at some times, the page works perfectly with no complaints.
when i run the ip of my web site i get the following error:
HTTP 500 - Internal server error
the log file shows the following error:
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was 'General access denied error '.
I get this error when trying to access a folder created on my IIS FTP server. How do I make this folder accessable? An Error occured opening the folder on the FTP Server.
Make sure you have permission to access this folder.
Details:
550 /<FOLDERNAME>: Access is Denied.
I have a web form to publish data to a ms sql database. Everything works great on my local machine which I use for development. When I uploaded the form and connection file to our web server, I receive the following:
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80004005)
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
/psc/Connections/psc_lms_db.asp, line 5
Here is the connection string I am using: Code:
I wrote a Windows Form Application to query the IIS MimeMap on the localhost which worked fine.
I ran the same code in asp.net and got "Access is Denied" exception. What is the least permissions set I should grant the aspnet account to avoid the exception. Or any other suggest would be fine Code:
I have a windows 2003 server with a "classic asp" application on it with some com Dlls doing the business logic. my problem is when i add these DLLS to component services, all my buttons on my web server start returning the error access is denied. it keeps this
problem if you remove the dlls from component services and restart the server.
In my site one page, named "category.asp". I send category id by query string, to show related categories. like: "category.asp?cid=2"
Now problem is that, when i see page "category.asp?cid=2", it executes successfully, but in the middle of page is see this error message <b>"HTTP/1.1 401 Access Denied Content-Type: text/html Date: Tue, 03 May 2005 20:26:06 GMT Connection: Keep-Alive 401 Access Denied. LANGUARD RESTRICTED OBJECT. completion addition to fulfillpacket size the EnD"</b> and after that error, page executing suspends.
It is the problem with only one category "category.asp?cid=2" and all other categories runs successfully, like "category.asp?cid=1" or "category.asp?cid=3".
I'm trying to add a user to active directory using ASP and am receiving the
following error:-
Active Directory (0x80070005)
General Access Denied Error
Does anyone know how to get round this problem?
We had a web site that works in windows NT very good with a DB in Access. Our clients migrate to Win 2000 and now the connection to the DB doesn't work ... the error is this:
Error: Access is Denied.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
/directory/progs/utils.inc, line 17 ...
My form has 20 e-mail variable... and i would like to do something like that:
objMail.To = request.form("one", "two", "three")
and so on...to send to everyone that need to receive the mail. (there´s a checkbox in the form
I need some help: with cdosys i'm able to send e-mail from asp using the local exchange
server. Now I also have to save the sent mail into the user's mailbox for future reference: how to?
I'm using:....
I am using the following code to attach an excel file to email.. but a funny thing happens, the excel file comes in with no data, and the uploaded file DOES have data... is there a filesize limit using objMail.AttachFile ??
Set objMail = CreateObject("CDONTS.NewMail")
objMail.From = "sales@???.com"
Objmail.BodyFormat = 0
ObjMail.MailFormat = 0
objMail.To = email
objMail.Subject = "File attached"
objMail.AttachFile Server.MapPath("/download/file.xls")
objMail.Body= mbody
objMail.Send
'response.write("Mail send")
Set objMail = Nothing ....
I have been reading quite a bit on how to do the objMail.AttachFile object, and no one can seem to get to it work properly. I have seen many variations such as:
objMail.AttachFile = (C:MyPathMyFile)
objMail.AttachFile = ("C:MyPathMyFile")
objMail.AttachFile = "C:MyPathMyFile"
objMail.AttachFile(C:MyPathMyFile)
objMail.AttachFile( Server.MapPath(<directory>) & arrFileList(intIndex)
I havent seen anyone report that they got it to work. I am using enctype="multipart/form-data" on my original web form, specifying the input type="file", declaring the attached file variable on my asp page, and doing request.form to gather the appropriate value, but nothing works.
Other forum users have said that it does not like virtual paths, but rather hard-coded paths, for some reason. Does anyone have some good code that works?
I have a password-protected area on my site. I'm not using any server
authentication methods: Instead I prompt the user for a username and
password using an HTML form and check these against a database of
registered users.
I was thinking that this page should be returning a HTTP status code of
"401 Unauthorized" instead of its current "200 OK". My reasoning being
that this would let search engines know what's going on when they
request a protected page and get redirected to the "Access Denied"
page.
I experimented with adding response.status = "401 Unauthorized" to the
"denied" page, but now it displays a (Windows/IE) username & password
prompt instead. The HTTP sniffer shows that the www-authenticate field
is set to "Basic".
My question: How can I indicate to the search engines that the page it
is requesting requires authentication, yet have it not display the
login/password dialog box?
I use the following code to check if a user is an admin in the login page of our intranet.
Set User = GetObject("WinNT://" & UserDomain & "/" & UserName & ",user"
For Each Group in User.Group
Select Case Group.Nam
Case "Domain Admins
Session("Admin")=Tru
Case "Domain Users
Session("User")=Tru
End Selec
Nex
The code works fine on IIS5 and Windows 2000. I have set up a test server with Windows 2003 and IIS6 and created the same application, however the second line of this code returns an error message
Active Directory Error '80070005
General access denied erro
It's obvioulsy a permission issue but I cannot figure out how to get around it.
I have a problem that I wasn't thinking of when I did this snapshot reporting in asp. Ok here it goes. I have a Access database that has my queries and reports.
I have some queries in access that have a parameter in them, like enter first date and enter second date to give me the range of record and total for the reports. Well, this asp that I have for doing the reporting does it server side. Code: