I have managed to scag around the internet and find this code posted in a forum way fack in 2004. I have working examples of aspMail written in VBScript but am doing (not through personal choice the coding in JScript).
This code seems to be ok apart form the http:// schema sections, they throw an errror and I can not find any information as to what they should be set to. Code:
I need some help: with cdosys i'm able to send e-mail from asp using the local exchange
server. Now I also have to save the sent mail into the user's mailbox for future reference: how to?
I'm using:....
Am looking for help in converting a CDONTS mail form script, which is not supported by my new host, into jscript. I have no fromal training in programming etc... Have self taught myself enough to probably get myself in trouble The following script i had written about 6 years ago for automated webimport intomy CRM "Goldmine" for populating database fields. Anyway, here is my old, and now worthless script...
View Replies View Relatedhow to check can be made to see if a CDOSYS email was sent successfully? And if not retreve and post the error?
View Replies View RelatedI am usually a CDONTS man but the hosting company say I must use CDOSYS. The following code seems to only work correctly when the recipients email address is the same as the sender address.
I have tried to send the email to Hotmail, Yahoo and GMail accounts and it does not send. No error messages, just is not received in the inbox of the account.....
im using code below to send an email, let say sample is my company domain, when i try to put myMail.From and myMail.To as Lee@sample.com.sg, but when i try to put myMail.From and myMail.To as same as code below, it seems like never send ou the mail. Can anyone tell me what is the problem? Code:
View Replies View RelatedI've been using CDOSYS Mail and this bit of code fine for a year. Well, we wanted to change the method of sending email from the Webserver sending it, to designating a specific SMPT server.
So, I found this code on MSFT's web site (MSFT CDOSYS SMTP ) that will allow me to do this, and it works, except that the redirect command that I have at the end of the file no longer works. I have no idea why.
Thi is the error I get:
error '8004020f'
/asp/send_email_foundation_conf.asp, line 78
Code: ...........
When I send htm mail to hotmail using cdosys the links appear like this " javascriptl("news01.htm"); " without quotes, the images appears in the worng place and they shows as attached, but when I send the same mail to Outlook there is no problem, the links and images apeears in the right place, there is no problem with it jus in hotmail or free web based application mail. (yahoo, gmail, hotmail, etc...)
Somebody Knows why??
I run a web site that uses various forms to send email to customers. For example, I have a "Forgot your password?" script and a "Email this page" script.I've found out that when a user sends an email via my site to a Hotmail address, the email just "disappears." I'm assuming Hotmail is considering the email SPAM because it was send by my web server? The site uses ASP and I've tried using CDONTS and CDOSYS (which I specified a SMTP server for) and nothing seems to work for Hotmail.
A large portion of my customers user Hotmail, so banning it really isn't an option.Is there anything I can do to prevent Hotmail from blocking my site's emails?
I have downloaded the script from brainjar but it needs a bit of tweaking because my smtp host requires authentication, I have added what i feel are the relevant lines of code but these are giving me a runtime error
These are the relevant lines of code, the 1st line giving me the error:
objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 'whether you use a authentication on the server
objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/sendusername") = *******
objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/sendpassword") = *****
What I am trying to do is to upload 4 files to my server (Windows 2003 Server Edition , IIS 6.0) and then e-mail them to my e-mail account. I use 2 files. The first is uploadTester.asp...
View Replies View RelatedI'm using CDO to send mail to the site owner from ASP pages with forms.
Recently one of my forms is occasionally sending email with what seems
to be an insertion which is replacing the plain text part of the email
with something else. Looking at the server sent email source, the
hacked emails have the following:
Here's the scenario. I'm currently using cdosys/asp to send mail to
our SMTP server. We use a product called MailFilter to check for SPAM.
It doesn't work very well. If MailFilter isn't working cdosys also has
problems and emails don't get sent. As these email are confirmations
for customer's bookings this means lots of customers calling to see
where their confirmation emails have gone. The root of the problem is
MailFilter but that here to stay. So I had this thought of sending the
message to a queue of some sort so at least they will get to the
customer eventually rather than being lost for good. So here's the
question:
Can I/How do I send messages to a mailbox on our exchange server using
cdo.message?
I'm using CDO from my vb component to fire email. The problem is
whenever one of the email addresses in to, or cc is wrong then none of
the mails are fired even to the correct addresses. It gives an error
like
The server rejected one or more recipient addresses. The server
response was: 550 Relaying denied for <xfd@wre.com>
My code goes like this. Why is the mail server trying to look for the
validation of email ids??I want that atleast the mail should be fired
to the correct email addresses rather than no email fire. Can i
achieve that.
Dim iMsg As New CDO.Message
Dim iConf As New CDO.Configuration
With iConf
.Fields.Item(cdoSendUsingMethod) = cdoSendUsingPort
.Fields.Item(cdoSMTPConnectionTimeout) = 10 ' quick timeout
.Fields.Item(cdoSMTPAuthenticate) = cdoBasic
.Fields.Item(cdoSendUserName) = "username"
.Fields.Item(cdoSendPassword) = "password"
.Fields.Item(cdoURLProxyServer) = "server:80"
.Fields.Item(cdoURLProxyBypass) = "<local>"
.Fields.Item(cdoURLGetLatestVersion) = True
.Fields.Update
End With
Set iMsg.Configuration = iConf
With iMsg
.To = strToEmail
.From = strFromEmail
.CC = strCCEmail
.BCC = strBCCEmail
.Subject = strMailSubject
If strMailFormat = "TEXT" Then
.TextBody = strMailBody
Else
.HTMLBody = strMailBody
End If
If strAttachment <> "" Then
.AddAttachment strAttachment
End If
If intPriority = 2 Then
.Fields.Item("urn:schemas:mailheader:X-Priority") =
cdoHigh
.Fields.Update
End If
.Send
End With
I have the following code in which the sessionExpire() is function in JScript. To display a msg box. But fails.
<%
If Session.Contents("Access_Key") = "" Then
sessionExpire();
End If
%>
need to learn ASP for a work project but don't really want to have to learn VBScript. Going forward, I'll also need to use ASP.NET so a book covering that with JScript would be good too.
View Replies View RelatedBy VBScript I can use this code:
Response.Write "ABC"
How can I use JScript show "ABC"?
Using JScript. is there a better way to write the following reg exp. or am I doing something right for a change ? Code:
View Replies View RelatedWould anyone be able to confirm that 'jscript.dll' is a necessary file for an .asp page on IIS 5.0 to use the <script language="JavaScipt" runat="SERVER"code? It looks like the code in this section is not working and being recognized since it keeps giving me:
"Microsoft JScript runtime (0x800A01B0)
File name or class name not found during Automation operation"
and am suspecting that this jscript.dll file is a necessary file that's missing or not installed since my search on the webserver's c drive came up empty.
I'm working on a project and the designer guy uses templates for everything. THis is fine except I have to call a JScript function when the page loads and I have no access to the body tag. Is there a way to call the function as the page loads from a VBScript command?
View Replies View Related<%@ Language=JScript %>
<%
print "OK";
%>
But,it's error.My computer was installed IIS
I've started implementing my ASP pages (in JScript) using the Try/Catch error handling.
Mostly it is working very well. It gives a nice custom error page which looks somewhat more professional than the default.
However there seems to be one limitation, the error object thrown to the catch statement doesn't include the line that the error occured on. Is there any way to obtain this information?
How to convert this from vbscript to jscript?
MBRequest("File1").Save
MBRequest is a script component
The eval function in JScript doesn't work according to
spec. Specifically, the function C() on page 73 of the
ECMA-262 spec doesn't return the function object
correctly under IIS 5. Binding the anonymous function to
a variable name and then evaluating that works as a
workaround, e.g.
function C() {
return eval("var x = (function (x) {return x*;}); x");
}
works. However, it should be possible to simply evaluate
a function without binding it to a name using the eval
function, especially since the spec has an explicit
example of this.
I am used to doing this in VBScript. But I am not able to get this to work in JScript.
My code simply tries to add 1 a variable which holds a char and parse into an int. But instead of a value of 2 for an addition for 1+1, I see 11.
sCount = Request.Querystring("Count");
//sCount outputs a value of 1
sNextCount = parseInt(sCount + 1);
Response.Write (sNextCount);
//outputs 11 instead of 2
Is parseInt wrong?
Can someone tell me , how to apply jscript in dreamweaver, as well as the example, because I am trying to run jscript script with an include file ....
View Replies View RelatedAccording to MSDN: "new variables or types defined in the
eval statement are not visible to the enclosing program."
However, in some cases under IIS 5, this is not the case.
Try the following program:
eval("var z = 12; 5;");
Response.Write(z);
According to the documentation this should be an error;
however, it prints "12".
how can i pass a parameter in javascript by referrence.
View Replies View RelatedIm still working on some <%@ LANGUAGE=JScript %> code ;).What is the same command as VbCrLf in JScript?I just want my HTML to jump one line down.
View Replies View RelatedI generally code ASP in VBScript, where I would do this:Code:
<%
response.redirect("anotherpage.htm")
%>
How do I do this in JScript? I keep getting the error "response is undefined".
i have a jscript that accepts parameters/arguments, how do you loop thru the arguments?
i = 0;
while (!i == oArgs.length ) {
WScript.Echo[oArgs(i)];
i = i + 1;
}
this does not even get inside the loop.
If I have a .ASP page that runs JScript code - is it possible to include an ASP page that runs VBscript?
View Replies View Relatedi have a website that users log on to. On one of the pages is a form. What I want to do is only show a certain part of the form for specific users. The way i want to do this is by using their username as a 'show if' command in dreamweaver. What I currently have is this
<% If Session("MM_Username") = "union" %>
all data to be hidden shown is here
<% End If %>
But this doesnt work for me! Any suggestions on how to show this properly?