CDOSYS Mail Form Runtime Error
I have downloaded the script from brainjar but it needs a bit of tweaking because my smtp host requires authentication, I have added what i feel are the relevant lines of code but these are giving me a runtime error
These are the relevant lines of code, the 1st line giving me the error:
objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 'whether you use a authentication on the server
objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/sendusername") = *******
objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/sendpassword") = *****
View Replies
ADVERTISEMENT
my code:
dim msconn
DIM mail, objMail
Set objMail = Server.CreateObject("CDONTS.NewMail")
objMail.From = "admin@abc.com"
objMail.Subject = "This is a test"
objMail.To = "webmaster@xyz.com"
objMail.Body = "this is a test email from abc.com"
objMail.Send
Set objMail = nothing
This code works perfectly well from any machine apart from the domain controller. On the domain controller, i get the following access denied error message:
Microsoft VBScript runtime error '800a0046'
Permission denied
/Emailer.asp, line 310
I have given full permission to the drop folder in the mail root as guided in other sites. It's still not working.
Can anyone tell me where i'm going wrong? anything else i can try?
View Replies
View Related
I need some help: with cdosys i'm able to send e-mail from asp using the local exchange
server. Now I also have to save the sent mail into the user's mailbox for future reference: how to?
I'm using:....
View Replies
View Related
I have an ASP script that collects information from a form on my site and
sends it as an email. The ASP script is calling CDONTS.DLL which is
registered on a win2k3 server with Exchange server running.
When submitting the form there is an error when it comes to the 'mail.send'
part of the script. I have given all the necessary folders the correct
permissions as per microsoft however I still get the same errors.
I believe it is something to do with permissions because if I disallow
anonymous access to the site and access it through the local network as a
logged in user the script works fine.
View Replies
View Related
how to check can be made to see if a CDOSYS email was sent successfully? And if not retreve and post the error?
View Replies
View Related
I am usually a CDONTS man but the hosting company say I must use CDOSYS. The following code seems to only work correctly when the recipients email address is the same as the sender address.
I have tried to send the email to Hotmail, Yahoo and GMail accounts and it does not send. No error messages, just is not received in the inbox of the account.....
View Replies
View Related
im using code below to send an email, let say sample is my company domain, when i try to put myMail.From and myMail.To as Lee@sample.com.sg, but when i try to put myMail.From and myMail.To as same as code below, it seems like never send ou the mail. Can anyone tell me what is the problem? Code:
View Replies
View Related
I have managed to scag around the internet and find this code posted in a forum way fack in 2004. I have working examples of aspMail written in VBScript but am doing (not through personal choice the coding in JScript).
This code seems to be ok apart form the http:// schema sections, they throw an errror and I can not find any information as to what they should be set to. Code:
View Replies
View Related
I've been using CDOSYS Mail and this bit of code fine for a year. Well, we wanted to change the method of sending email from the Webserver sending it, to designating a specific SMPT server.
So, I found this code on MSFT's web site (MSFT CDOSYS SMTP ) that will allow me to do this, and it works, except that the redirect command that I have at the end of the file no longer works. I have no idea why.
Thi is the error I get:
error '8004020f'
/asp/send_email_foundation_conf.asp, line 78
Code: ...........
View Replies
View Related
When I send htm mail to hotmail using cdosys the links appear like this " javascriptl("news01.htm"); " without quotes, the images appears in the worng place and they shows as attached, but when I send the same mail to Outlook there is no problem, the links and images apeears in the right place, there is no problem with it jus in hotmail or free web based application mail. (yahoo, gmail, hotmail, etc...)
Somebody Knows why??
View Replies
View Related
I run a web site that uses various forms to send email to customers. For example, I have a "Forgot your password?" script and a "Email this page" script.I've found out that when a user sends an email via my site to a Hotmail address, the email just "disappears." I'm assuming Hotmail is considering the email SPAM because it was send by my web server? The site uses ASP and I've tried using CDONTS and CDOSYS (which I specified a SMTP server for) and nothing seems to work for Hotmail.
A large portion of my customers user Hotmail, so banning it really isn't an option.Is there anything I can do to prevent Hotmail from blocking my site's emails?
View Replies
View Related
What I am trying to do is to upload 4 files to my server (Windows 2003 Server Edition , IIS 6.0) and then e-mail them to my e-mail account. I use 2 files. The first is uploadTester.asp...
View Replies
View Related
I got an error saying
Microsoft VBScript runtime error- Error '800a000d'
Type mismatch
/briansforums/default.asp, line 923
also another error called Code:
View Replies
View Related
CDONTS is not working on my webserver. IIS 5.0 Windows 2000
I am using this code
<%
Dim objNewMail
Set objNewMail = CreateObject("CDOnts.NewMail")
objNewMail.From ="webmaster@test.com"
objNewMail.To = "***@***.com"
objNewMail.Subject = "Test"
objNewMail.MailFormat=0
objNewMail.BodyFormat=0
objNewMail.Body = "<html><b>test test</b></html>"
objNewMail.Send
Set objNewMail=nothing
%>
But it gives me error
__________
Microsoft VBScript runtime error '800a0046'
Permission denied
/test.asp, line 11
_________
I have also referred this Microsoft KB but no help....
View Replies
View Related
I am accessing the same error-containing ASP page on an ISP server using w2k IE6 but with different effect. On the first computer I get several line of HTML outputed by ASP, shown correctly by the browser, followed by a descriptive error message:
Microsoft VBScript runtime error '800a000b'
Division by zero
followed by the number of the error-making line. On the second machine my HTML is not displayed at all. Instead I am getting that meaningless error page sayng that The page cannot be displayed, HTTP 500 - Internal server error. How can I get the second computer be more informative about the errors?
View Replies
View Related
I'm using CDO to send mail to the site owner from ASP pages with forms.
Recently one of my forms is occasionally sending email with what seems
to be an insertion which is replacing the plain text part of the email
with something else. Looking at the server sent email source, the
hacked emails have the following:
View Replies
View Related
When I do the click event, I get this error:
Microsoft VBScript runtime error '800a01a8'
Object required: '' /get.asp, line 13
The Server is running on NT.
View Replies
View Related
I have just tried setting up a POST USER A COMMENT and when I go to post a comment i get this:
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'LBound'
/ws/viewmember.asp, line 103
Line 103:
Code:
For MM_i = LBound(MM_fields) To UBound(MM_fields) Step 2
View Replies
View Related
Getting this error:
Microsoft VBScript runtime error '800a0046'
Permission denied
/OperationsManageFiles.asp, line 28
View Replies
View Related
I'm using CDO from my vb component to fire email. The problem is
whenever one of the email addresses in to, or cc is wrong then none of
the mails are fired even to the correct addresses. It gives an error
like
The server rejected one or more recipient addresses. The server
response was: 550 Relaying denied for <xfd@wre.com>
My code goes like this. Why is the mail server trying to look for the
validation of email ids??I want that atleast the mail should be fired
to the correct email addresses rather than no email fire. Can i
achieve that.
Dim iMsg As New CDO.Message
Dim iConf As New CDO.Configuration
With iConf
.Fields.Item(cdoSendUsingMethod) = cdoSendUsingPort
.Fields.Item(cdoSMTPConnectionTimeout) = 10 ' quick timeout
.Fields.Item(cdoSMTPAuthenticate) = cdoBasic
.Fields.Item(cdoSendUserName) = "username"
.Fields.Item(cdoSendPassword) = "password"
.Fields.Item(cdoURLProxyServer) = "server:80"
.Fields.Item(cdoURLProxyBypass) = "<local>"
.Fields.Item(cdoURLGetLatestVersion) = True
.Fields.Update
End With
Set iMsg.Configuration = iConf
With iMsg
.To = strToEmail
.From = strFromEmail
.CC = strCCEmail
.BCC = strBCCEmail
.Subject = strMailSubject
If strMailFormat = "TEXT" Then
.TextBody = strMailBody
Else
.HTMLBody = strMailBody
End If
If strAttachment <> "" Then
.AddAttachment strAttachment
End If
If intPriority = 2 Then
.Fields.Item("urn:schemas:mailheader:X-Priority") =
cdoHigh
.Fields.Update
End If
.Send
End With
View Replies
View Related
trying to convert from PHP to ASP for a work project.
Got a book to cover the basics.
Got some webspace on M6.net too.
Typed up example in the book, made sure that the location was the correct location on the webserver, when I built I got no errors, however when I try to view the page in IE I get a RunTime error.
I am not sure of the whole build/deployment of an ASP page, so kinda hoping someone could help me out please.
View Replies
View Related
Trying to boot up msn messenger control, and get "runtime error
429...activex cannot create the object"
DEVBuilder.org, http://www.DEVBuilder.org
ASP,ASP.NET,VB.NET,PHP,Java,and SQL Support, all in one place.
View Replies
View Related
I'm trying to create an xml file but when i run my code i keep getting error Code:
View Replies
View Related
I get this error when doing an upload and writing to a bin. file
the code is the following :
=====================================
Set ScriptObject = Server.CreateObject("Scripting.FileSystemObject")
Set MyFile = ScriptObject.CreateTextFile(Left(folder,pathEnd) & "" & filename)
For i = 1 to LenB(value)
MyFile.Write chr(AscB(MidB(value,i,1)))
Next
MyFile.Close
======================================
then i get the error Microsoft VBScript runtime error '800a0005' Invalid procedure call or argument .
I get this error on my Server on My local network and on another different Server on three different networks Server is windows 2000 Server.
The nice thing is when I uploaded to code to my Windows 2003 Server hosting. IT worked
I need help in this guys if someone knows what is going on. is there a special software or a component need to be installed. on my local server.
View Replies
View Related
hello anyone heard of the error below ?
It jsut started to show on my asp page, where i open a recordset Code:
Microsoft VBScript runtime error '800a01fb'
An exception occurred: 'Open'
View Replies
View Related
Oke here is the thing, a friend of mine asked me if i could help with an error. She let a member of her family made an shopping cart in asp. Which went quit well, but a few weeks ago he was called up for the marines. He thought he finished the project, but he didn't. He cannot be reached anymore because he may not contact anyone.
Now the error. When she want to put anything in the shop (she's the owner) at the end he gives this error:
Code:
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'cDbl'
/preview/admin/products_edit.asp, line 189
I looked up line 189 and before and after and it says this:
Code:
View Replies
View Related
I have the following asp code and the functionality works, but before it works a dialog box pops up and says 'Runtime error 'Episodes' is undefined. I don't know how to get rid of it. Anyone have any ideas?:
for i=1 to 5
response.write "<tr><td><a style='text-decoration: underline;' class='biosLinks' href='http://www.url.com/Episodes/episode" & i & ".wmv' onclick='window.open(Episodes/episode" & i & ".wmw); return false'>Episode " & i & "</a><br></td></tr>"
next
View Replies
View Related
I put a VB script into asp to display an internal IP address and computer name in the browser: Code:
View Replies
View Related
Code to email form data via ASP. Forced to use CDOSYS by 2003 server at host. It sends an email fine, but the form data is missing. Where my going wrong? Could it be the html file's form actuating the .asp file? Could it be an enctype issue? Or bad ASP syntax... Code:
View Replies
View Related
I'm having some trouble with a script, I use the script to log onto a website, get a price on a product, decide if it is in stock or not, and update a local database.
I'm using the MS XML Parser to access the remote site, and stripping the string down to end up with the price.
Sometimes the code works, and other times i get this:
Quote: Microsoft VBScript runtime error '800a0009'
Subscript out of range: '[number: 0]'
/admin/updateprices.asp, line 150
the script is as follows starting at line 135, and ending on line 152: Code:
View Replies
View Related
I have been trying hard for the last 2 hrs to get rid of the above mentioned error in this syntax..
Select * from table1 where
calldate >= dateadd(h, -24, DATE())
I have to make an reports which shows the last 24 hrs call. I am using ASP and SQL SERVER 2000. This code works well when i run in query analyzer but when i used the same in ASp it prompt me this error..
VBScript runtime error 800a0005
Invalid procedure call or argument 'dateadd'
Can anyone put somelight why i am getting this error ?
View Replies
View Related
This line seems to have a problem, but I can't find it.
Code:
sql = "INSERT INTO Table2 (Title, Artist, Description, DiscNo, TrackNo, Price) VALUES ('" & Request.Form("Title") & "','" & Request.Form("Artist") & "','" & Request.Form("Description") & "','" & Request.Form("DiscNo") & "','" & CInt(Table1.TrackNo) & "','" & Request.Form("Price") & "')
the error is:
Microsoft VBScript runtime (0x800A01A8)
Object required: ''
View Replies
View Related
I've received the following error message on my ASP login page.
Error Type:
Sun ONE ASP JavaScript runtime (0x800401F3)
Server.CreateObject Failed~System message, messageid = 0x800401f3
/html/sign_in.asp, line 4
View Replies
View Related
