I am using On Error Resume Next to allow my application to deal with errors accessing the database, i.e. if the DSN-less connection doesn't work then it tries the DSN connection and this is fine.
What I want to find out is how can i stop the rest of the page continuing after errors, in essence I want to cancel the On Error Resume Next statement after the database connection stuff is done so that errors will stop the page and I can debug them.
I've a query on On Error Resume Next. I've explained what I understand for each case, I'm not sure that this is true.
Case:
1] Used in Function/Sub: will resume to the next statement in the
function or sub; but will not affect the error out side of the functions
2] Used at the top of the asp page: will affect all the page code and
will not affect the function/sub in the page at all.
3] Used in the page where ever required:?
I put the On Error Resume Next command as the very first line in my ASP
pages, which may contain various inc files and sub-routines/functions, so
that I can try and stop the dreaded DB error messages displaying to visitors
and would-be hackers.My question is, does this one statement at the top of the page cater for all of the code that might be executed in the page, in the include files and in
sub-routines/functions or do I have to put the statement in certain places
as well?The reason I ask is that I'm sure if I get one of my include file names
wrong it brings up an error rather than going straight through and
displaying a funny page.I hope I don't have to put it in various places as I like to have this one statement so that I can flip back and forth between live and dev time and
having to go into 'x' amount of pages to flip between these 2 states would
be tiresome.
My code works when the table is not found. But when the table is found it doesn't do the else part..Code:
Dim oConn
Dim oRs
Set oConn = Server.CreateObject("ADODB.Connection")
oConn.Open "Store_Form"
Set oRs = Server.CreateObject("ADODB.Recordset" )
elseif campo = "txtAN_GEN" then
on error resume next
Set oRs = oConn.Execute("SELECT * FROM 00_MOD48")
If err <> 0 then 'If table not found
GetFieldValue = "00001"
else
GetFieldValue = "150"
end if
I have a piece of code that i created. It actually works as it should. The only problem is the objrs2.update causes an error-duplicate primary key. However when i check the database it has done what it should.
I then tried to use on error resume next, but it keeps timing out and i do not want to extend the time limit. Does someone know how to get round this? Code:
Is there a way to avoid On Error Resume Next for:
cnn.Open strCon
SQL = "EXEC Customer @txtEmail='" & email_address & "'"
set rs = cnn.execute(SQL)
'On error resume next
rs("email_address")
'// This record does not exist thus throwing up an error. I could use On
Error to resume and then do this
'// If rs.eof or rs.bof
'//
.....But I hate this convention as I find debugging a problem. Is there a
better way?
This has been puzzling me for very long time and no where has
talked about the scope of a 'On Error Resume Next' statement.
When we program ASP(.NET) pages then we usually like to let
ASP(.NET) stop at errors and report back to us. However there
are parts of our scripts that we know an error will be thrown
and we encapsulate that area inbetween:
On Error Resume Next
Err.Clear
'Try block
If Err.Number Then
'Catch block
End If
On Error GoTo 0
This is similar to the infamous try {} catch(e) {} blocks in
Java/C++, etc.
If we forget the last line 'On Error GoTo 0' then our ASP(.NET)
scripts runs over all errors thrown and we find it hard to
find bugs. So the big question is, does 'On Error Resume Next'
go out of scope when it's written inside a block
(eg. Function)?
Function Function1()
On Error Resume Next
'Our code
End Function
When the Function1 call returns, does the outside calling scope
automatically stays as it was (On Error GoTo 0)?
I'm on the last piece of this project, when a user goes to this page "myfolder.asp" it shows the contents of their folder.
If they don't have one created yet, I want to give them a friendly message: "You have nothing in your folder!" , and continue with the rest of the HTML code, but then ignore the Repeat Regions and dynamic text thats inside the HTML.
Right now I have it woking if the table exists, it shows the records. If I delete the table, I have this message at the top of the screen and nothing else: "You have nothing in your folder!"
Here is the code:
I was getting this error message using an ASP to run a stored procedure in ORACLE.
ORA-01013: user requested cancel of current operationMy stored procedure was taking a long time to process.
In the ASP page:
set cmd = server.CreateObject ("ADODB.Command")
with cmd
set .ActiveConnection = cnn3
..CommandTimeout=300 '' <= I added This
..CommandText = mySQL
..CommandType = 4 'adCmdStoredProc
I am using asp, and would like to display a pop-up box when a user cancels the window and when he clicks the back button, to remind them to save their changes.
View Replies View RelatedI have the following line of code in an asp.net app?
Response.Write("<script>ret = confirm('Print Orders?');</script>")
How can I check the value of the variable ret in asp.net? I want to be able to check the repsonse from the user before continuing with my asp.net code. Is this possible, or am I going about this the wrong way?
Can ASP resume download/ upload when uploading large files using ASP, like Download programs do? If so, can anybody point me to tutorial or a script I can start with?
View Replies View Relatedi need 2 files html as well as asp forms. pls help me with working code.
View Replies View RelatedI got an error saying
Microsoft VBScript runtime error- Error '800a000d'
Type mismatch
/briansforums/default.asp, line 923
also another error called Code:
# Error Type:
Server object, ASP 0177 (0x800401F3)
Invalid ProgID. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.
/CoxAxis/adminEditPage.asp, line 6
My code:
<%
dim self, pid, i, c
self = Request.ServerVariables("URL")
pid = Request.Querystring("pid")
set Session("pageContent") = Server.CreateObject("Scripting.Dictionary")
Set custObj = Server.CreateObject("NFIFunctions.ValidateField") Line 6
set psi = Session("pageContent")
set errDict = Server.CreateObject("Scripting.Dictionary")
i = 1
i'm getting
Provider error '80004005' Unspecified error
admin/dbconnection.inc, line 4
what this is, it only started happening after i did a recent upload of my database!, i 've tryed uploading it again but the error still appears.
Let me start by saying I'm fairly new to Asp coding. That said...
My ISP only uses AspSmartMail. I've created an online form that uses fill out, which is then e-mailed to the collector of the information and CC-ed to the person who submitted the information.
The error I'm receiving is this:
aspSmartMail.SendMail : Error 28 error '8004001a'
504 Invalid Username or Password
In my script, I've Dimensioned several items, as you'll see below, passing the authenticating username/password to the smtp server, but it's not working. I tried not passing the information by entering in the actual info without it being passed by the diminsioned items. This didn't work either. I of course verified that the username/password I'm usine is correct.
Can someone plase tell me why I can't authenicate? I would really appreciate any help that might be out there.
Relavant Asp code below:
-----------------------------------------
Dim smtpserver,youremail,yourpassword,yourusername,rem oteemail
'Edit these 3 values accordingly
smtpserver = "mail.smtp_server.org"
youremail = "yourname@smtp_server.org"
yourpassword = "password"
yourusername = "yourusername"
remoteemail = "email_address_to_send_to"
Dim ObjSendMail
Set ObjSendMail = Server.CreateObject("AspSmartMail.SmartMail")
'Config remote SMTP server info.
ObjSendMail.Server = smtpserver
ObjSendMail.ServerTimeOut = 35
ObjSendMail.SenderAddress = youremail
ObjSendMail.Password = yourpassword
ObjSendMail.Username = yourusername
'End remote SMTP server config.
'Config E-mail.
ObjSendMail.Recipients.Add remoteemail
ObjSendMail.CCs.Add Request.Form("Confirm_Email")
ObjSendMail.Subject = "Email Subject"
ObjSendMail.SenderAddress = "Confirmation-NoReply@smtp_server.org"
ObjSendMail.SenderName = "SenderName"
ObjSendMail.ContentType = "text/html"
ObjSendMail.Body = strBody
'Note - strBody is Dimensioned elsewhere in my script to build the HTML message body.
'End Config E-mail.
'ObjSendMail.Send
ObjSendMail.SendMail
if err.number <> 0 then
response.write("Error n° " & err.number - vbobjecterror & " = " & err.description & "<br>")
else
Response.Write "aspSmartMail has sent your message with this file as attachment : <br>"
'Response.Write ObjSendMail.Attachments.Item(1).FilePathName
end if
Set ObjSendMail = Nothing
---------------------------------------
End code
i m getting this following error:
Compiler Error Message: BC30002: Type 'ODBCConnection' is not defined.
Following is my code: ...
I keep getting an error when I try to run this update statment: [CODE]
INSERT INTO MYPosts ( IEname, country, server_name, LANIPAddy, license_ver, wrkstn1, wrkstn2, wrkstn3, wrkstn4, wrkstn5, notes, status, rdse, esc, eso, parent, , timezone, ) VALUES ( '" & lcIEname & "', '" & lcCountry & "', '" & lcServerName & "', '" & lcLicenseVer & "', '" & lcwrkstn1 & "', '" & lcwrkstn2 & "', '" & lcwrkstn3 & "', '" & lcwrkstn4 & "', '" & lcwrkstn5 & "', '" & lcNotes & "', " & lcStatus & ", " & lnRDSE & ", " & lcESC & ", " & lcESO & ", " & lcParent & ", " & lcTimeZone & ")"
I get the following error:
Microsoft JET Database Engine error '80040e14'
Syntax error (missing operator) in query expression
I am trying to display data from three tables in an MS Access database. Here is my code:
View Replies View RelatedCDONTS is not working on my webserver. IIS 5.0 Windows 2000
I am using this code
<%
Dim objNewMail
Set objNewMail = CreateObject("CDOnts.NewMail")
objNewMail.From ="webmaster@test.com"
objNewMail.To = "***@***.com"
objNewMail.Subject = "Test"
objNewMail.MailFormat=0
objNewMail.BodyFormat=0
objNewMail.Body = "<html><b>test test</b></html>"
objNewMail.Send
Set objNewMail=nothing
%>
But it gives me error
__________
Microsoft VBScript runtime error '800a0046'
Permission denied
/test.asp, line 11
_________
I have also referred this Microsoft KB but no help....
I'm trying to send an email with a list of people in the body of the email but when i ty to send the mail i get the error
Microsoft VBScript compilation error '800a03ea'
Syntax error
/admin/tr1.asp, line 124 do while not rsp.eofwmail is the body of the email.I'm completely stumped here. Code:
I have a database driven (ms access) website which runs fine on my computer (win 2000 iis6). However, on uploading, some pages am receiving the following error
"An Unknown script error occured while processing your request."
......
I am testing a new website I built on the actual server. My section for uploading documents seems to be giving me problems. Can someone help me please? This is the error I am getting:
Microsoft JET Database Engine error '80004005'
'c:logindatairb.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
/login/insert.asp, line 28
I had this before: .....
This New Company I'm with Sets their Default WebSite to a local Directory on "D" Yea I've been down the whole route reinstalling XP Pro,,, IIS 5.1 The .NET framework everything. Now I'm just frustrated.
What the Heck !! Theres a web project (C# ASP.net) in the solution containing many many some odd 19 or so projects. MSVSS is additionally in the picture to make things a little more complex. (I.E. the non web projects go elsewhere on the D drive) All I'm asking for here are the BASIC Settings to get my DEV environment and my IE to "SEE" this D:Web folder as Localhost. It worked for a sec. A very brief second. Then it was Gone. Specific ERROR:
Could not load type 'appname.web.Global'. Parser Error Server Error in '/' Application.
My text file, dsn file, and asp page are all in the same directory on the web server.My problem is that I want the text file to be on drive U: (which is each users drive)When I do this I get the following error (even if I copy the dsn file to the U: drive):-
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Text Driver] '(unknown)' is not a valid path.Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
I'm getting the following error on one of the servers I maintain:code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[MySQL][MyODBC 5.00.11][MySQL] 2006 MySQL server has gone away
Always occurs when the MySQL server it connects to restarts, which is hosted on another box. Nothing but an IIS restart fixes it.Is there anything I can do to get ASP to automatically pick-up the connection, or force a reconnect? I'm not an ASP coder, so a little hand-holding would be nice (don't worry, I won't kiss you).
I am getting this error after uploading an asp search page and attempting to search an MS ACCESS database.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x7d0 Thread 0x340 DBC 0x2870cd9c Jet'.
I've researched the error code online,and it seems to be server-side,but a lot of the server talk is pretty much Greek to me.
I have designed my database so that u cannot insert duplicate keys. So when this happens, I get the following error:Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Violation of PRIMARY KEY constraint 'pk_QuoteItem'. Cannot insert duplicate key in object 'QuoteItem'.
How do I catch this error and print a more user friendly error message?
I had developed a messageboard in asp which allows users to post new messages,reply to existing messages.I am using textarea (Html tag) for a messagebox in my asp page .When the user enters any characters in messagebox except a single quote ('),the message gets inserted in oracle database without any problem.But if message contains single quotes (') , while inserting in a database it gives the following error
"Microsoft OLE DB Provider for Oracle error '80040e14' ORA-00917: missing comma ".
Is there any solution to insert messages containing single quotes in a database?
My asp run smoothly before. But, now, I found the ASP page is not smoothly recently.
Sometime if the ASP is requested to connect to Access, the page will prompt
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open
registry key 'Temporary (volatile) Jet DSN for process 0xdd8 Thread 0xae0
DBC 0x3a85074 Jet'.
What's going on?
I tried to display an error detail on my webpage when I got an "HTTP 500 Internal Server Error" of my .asp page, but I was failed I did setup in IIS so it will display debug error on my asp page as well as setting up my browser internet option.
Can you help me how to set it up so I am able to see the error detail on my browser when I get "HTTP 500 Internal Server Error" ( Currently, I just got a blank page with "HTTP 500 Internal Server Error" in the web page title)I run IIS 5.0 and window professional xp browser.
I need help figuring out this Microsoft OLE DB Provider for ODBC Drivers error '80004005' error.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
register.asp, line 115
I created a simple registration form. It works for me but when i uploaded to a remote server...it doesn't work any more. The host said he made a System DSN connection to the registration.mdb database. Code: