I am trying to construct an SQL statement that can grab all of the entries out of a table, where the Date field consists of today's date. The Date field is called 'DateTime' - and it is in a General Date format (DD/MM/YYYY HH:MM:SS). I obviusly want to use an SQL statement like this:
SELECT * FROM tblExample WHERE (DateTime = Date());
However, that wont work because Date() will only return a short date (DD/MM/YYYY).
I like to pull the top 5 record that are closest to the current date but the date field can not be empty, see some records do not get assigned an expire date and others do. I want to show the closest expiring records.
objconn.commandtext = "SELECT TOP 5 * FROM merchants ORDER BY Expires"
What do I need to add to exclude the emtpy expires field records.
I am having a problem getting a short format november date (e.g. 01/11/2006) to be passed in to an access 97 saved parameter query. October dates work fine but not November dates. Code:
View Replies View RelatedI have a database and i want to work out the sum of the discount field where the id is lets say 1 and the date is greater than 01/02/2006
The database hase records older than 01/02/2006 but I dont want them just the 1s dated 01/02/2006 to now
set RS3 = conn3.execute("select SUM(discount) from restaurantaccounts WHERE restaurantid=1 AND datepaid >=01/02/2006").
This is regarding a change in the Short Date format under Hebrew Regional
Settings, that has caused huge problems in our ASP web application. The
change appears to have been introduced sometime before Windows 2000 Service
Pack 4 and has remained through to Windows XP. I am looking for a solution
that doesn't involve rewriting our application (much) and that allows all
our users to keep using Hebrew Regional Settings.
To summarize our problem - we have an ASP-based intranet web application
that is used in our Israel office. Before we installed Windows 2000 SP4 on
our web server and on the client machines in the office, the application ran
perfectly. Dates appeared on the pages and in input textboxes in the correct
dd/mm/yyyy format. Immediately after installing SP4, dates on the pages and
in input textboxes are formatted as yyyy/mm/dd. This is not just a visual
change, it has caused many functions in the application to break. Code:
I am developing a simple booking system where I had a booking date. The problem is I want to make sure that the user must book 3 days in advanced for certain room.
I have tried to use DateDiff but it seems doesn't work. Actually i just 1 to make sure that the user must book 3 days in advanced from the current date. I am wondering whether there is anything goes wrong in my datediff function. Code:
i'm new here and i'd like to ask if there's someone who knows how to compare date() function and date from database with date/time type inside select statement so i don't have to do if..then..else
View Replies View Relatedsql = "UPDATE Marknad SET" _
& " Typ ='" & Typ & "'" _
& ", Modell ='" & Modell & "'" _
& ", Arsmodell ='" & Arsmodell & "'" _
& ", Beskrivning ='" & Beskrivning & "'" _
& ", Stad ='" & Stad & "'" _
& ", Prisidé ='" & Priside & "'" _
& ", Fornamn ='" & Fornamn & "'" _
& ", Efternamn ='" & Efternamn & "'" _
& ", Telefon ='" & Telefon & "'" _
& ", Epost ='" & Epost & "'" _
& ", Datum ='" & Datum & "'" _
& " WHERE (((Marknad.Annonsnr)=" & Request.QueryString("id") & "))"
DatabaseConnection.Execute sql
---
Above does work as I want it to do BUT it inserts 1/8/2006 instead of 8/1/2006 as it should!
The best thing would be to exclude the date from updating at all, but when taking away the line:
& ", Datum ='" & Datum & "'" _
It gives an error... how do I solve this?
I forgot, you might want to see this:
Datum = date
In my page i have two combobox. one for year and one for week numbers.Now my prob is
1.when i select a year from combo box 1, second combox box will display the number of weeks in that year.eg if i select 2005 it display me list from 1 to 53 as there are 53 weeks in 2005.
2.when i select a weeknumber from combobox 2 and press submit button it ll display start date and end date of entered week.
I am trying to compare two dates. My problem is no matter what the value of mydate, it is still fall in the first IF statement condition (even if mydate is 10/10/2004). Any advise for this matter?
mydate = "6/6/"&year(date)
IF date() <= mydate THEN
response.write "first half of the year"
ELSE
response.write "second half of the year"
END IF
I would like to modify this so that the first available date that can be selected is five BUSINESS days out. The script only shows Mon-Fri so if the date is Tue Jul 13, 2004, Tue Jul 20, 2004 needs to be displayed. Code:
View Replies View RelatedI am trying to compare a date in my database to the current date. MySQL statement is:
sqltemp5="select * from users where dateclosed <= '" & date & "'"
What I am trying to accomplish is exclude records where the dateclosed field is older than todays date. Such as if dateclosed = 6/30/2004 then today being 08/25/2004 that record should be excluded.
In a connection string, I have the following:
sql3 = "SELECT DISTINCT State FROM Property Where TypeID = '" & srch_cat & "'"
In the database, is a field called expiredDate I am trying to show only records whose expiredDates are greater than todays date, but I am messing up somewhere. The values in the fields are as this: 3/7/03 (or something like that...no time is added to it)
"SELECT id, title FROM Businesses WHERE Date_Added >= " &
Request.Form("Since_Date")
This SQL string returns all records from the table Businesses and does
not seem to be able to recognise Request.Form("Since_Date") as a valid
date. The Since_Date value is entered into a form field as
"01-Jan-2005" and appears to be treated as a date; when viewing the
SQL statement(with a response.write) it shows the date as 1/1/2005
even if it is entered into the form as 2005/1/1
I've also tried CDate(Request.Form("Since_Date")) with no luck,
although this was the treatment that worked when the SQL statement was
running in an .idc file.
Date_Added is a regular DateTime field in an Access 2000 database
Any suggestions please ?????
I'm trying to get all records from my SQL Server Database with
"DeadlineDate" = today (not today - 24 hours).
All records has a field called "DeadlineDate", and the date is stored in
this field like this: 13.08.2005 07:00:00
I dont care about the hours (Ex: 07:00:00), just the date (ex: 13.08.2005).
This is the SQL I have made, it gets all the record with the date = today -
24 hours... but that is not what I want.
sql = "select title from tblProject where (deadlineDate BETWEEN DATEADD(d, -
1, GETDATE()) AND GETDATE())"
How can I get just the records that has the date = today's date??
How do i select all records from a table that has a datetime field in it by date.
so i want all the records that was created today.
if i put only the date it doesn't work. this is what i have:
Code:
strsql = "select cnum from [topline data] where cnum = '" & cnum & "' and activerecord = "& activerecord & " and timestamp <> '12/10/2007'"
I need an ASP routine that will take a date, compare it to the present date,
and then output the difference in Years, Months, and Days.
(I'm too swamped to write it myself & I'm sure somebody already wrote it
better than I can)If anyone can point me towards such a routine,
I have built an online booking system for a hotel and all is working fine except for the fact that the ‘From’ and ‘To’ dates are saved in the MS Access database in US format. The user selects from a date picker pop, which places the in the textfield as English format e.g. 02/12/2007.
However when I try and save this value into the date column in my DB I obviously receive an error because the formats are different. Please could someone advise me on the best way to convert an English date to a US in order to insert this into the DB using ASP & MS Access.
At the moment I am using plain text as the column type, but this is not ideal as I want to start to run queries against the 2 dates.
My ASP page allows the user select the date, and it will display the report during that week of that date.
My question is when the program query database, I need to know the beginning date and ending date of that week.
I have a noticeboard that the user inputs items into. One of those is the date of an event. Once that event has passed I want it to disappear from the page.
So I need to do a comparison with current date to the date in the "datestarted" field. My table is called "notices." Using Access and ASP VBscript.
Uust wanna check that the start date should be less then End date... does any one has javascript for this or any website ...
View Replies View RelatedI have two textboxes, currentdate and datedue. When a user enters the current date, how do I automatically update the datedue textbox so that it is 4 months later?
View Replies View RelatedI found some script that converts ASP to MySQL. Now I need to reverse that process.MySQL Order_Date is the field I need to convert.I have a select list for order nunber - 'order date Where order date = MYSQL date stored in db.Sounds simple enough, but is very difficult so far to implement.
View Replies View RelatedI am trying to compare a date in MYSQL field with the system date -
today = date()
sqlchk = "SELECT COUNT(*) FROM fib_note WHERE fib_note_actdate =< " &"'" &today &"'" & " AND fib_note_actdone = 0"
Set objRS = objConn.Execute(sqlchk)
It is freakin out as the date in the DB is YYYY-MM-DD where as the date from date() is MM/DD/YYYY how can I get around this?
i'm breaking my head with this a hour now Code:
mySQLz="SELECT * FROM services WHERE serdraw=id AND shop="& shopp
call getFromDatabase(mySQLz, rstempz, "mozzzdiyexec.asp")
if not rstempz.eof then
response.redirect "message.asp?message="& Server.Urlencode("aSSSdded")
why this is not working...i almost sure that this is because that line
mySQLz="SELECT * FROM services WHERE serdraw=id AND shop="& shopp
id and shopp are numbers
I've got this PHP script working on one of my sites and now need an ASP version for my intranet. I don't know ASP, can anyone help out?
Know of anyway to NOT have a blank browser window open when clicking on the link or even a better solution to prevent spam harvesters? Code:
I just go an error in an If statement as follow:
If rs.State=0 Or rs.EOF ...
In this particular case, rs.State was 0 and I got an error which is related with the Scripting engine trying to execute rs.EOF which of course through the error.
Is there any way to reach in VBScrit the same meaning of Short Circuit evaluation as C++ and Java do?
I’m trying to put into my SQL DB. An ASP now() for mated varaible: IE: mm/dd/yyyy hh:mm:ss where as the My SQL datetime fields take the format of yyyy/mm/dd hh:mm:ss Is there any way to format the date for the My SQL ? Or do I have to tare it apart with left and right and rebuild it in the correct format…..
View Replies View Relatedis there a way of working out the day of the week ie Monday Tuesday etc from a date?
View Replies View Relatedif i use date become a primary key, i cannot delete and update but i can only insert the data.
is it become i need to convert it when i want to update or delete? becoz when it retrieve it, it would surely be a string?
My prob now is i there's no date entered in the DB, there will be nothing displayed at the edit page. Say for example date of departure for employee.
If nothing is selected and therefore entered, the value in the DB should be empty. Therefore when I try and retrieve the date of departure, the drop down list should be at it's default(mayb in this case "select one"). Code:
i want to store a date 8 july 2005 12 noon in a variable what i want to do is check if the current date is less then 8 july 2005 and time 12 noon
then i want to display a message i am having problems store 8july 2005 12 noon in a variable any ideas.
I know this is a simple questions, however I forgot how to extract the Month from the date. I've tried a few things such as Code:
Left(date(), 2)
and other variations of that nature. Basically what I'm trying to do is to pull the month from the date in either a number sequence or in long format. I run into problems with the left(date(),2) code when the digits are single then turn into a double.