It seem that I did not configure the SMTP service on a Windows 2000 server correctly because all the email is been sent to InetpubmailrootQueue directory. Do I need to install Outlook for the email to send the mail to the recipient?
View RepliesI am using ASP formmail from www.brainjar.com. I keep getting this error message:
Form could not be processed due to the following errors:
Email send failed: The server rejected one or more recipient addresses. The server response was: 550 endlessenergysystems.com.
The email address in the form is correct and does work. I have changed the settings to different email address and SMTP servers to try to figure out the issue. However I still get the same error. Here are the basic settings:
referers = Array("www.endlessenergysystems.com", "endlessenergysystems.com")
mailComp = "CDOSYS"
smtpServer = "smtp.readyhosting.com"
fromAddr = "info@endlessenergysystems.com"
I was able to send email via the server in both .NET and ASP (using CDO for ASP). However I had to configure a SMTP server for this to work, which means the email will be sent via the server's SMTP service. so this could mean a lot of overload on the server. So as to reduce the work on the server, is there another way to send email to people?
View Replies View RelatedI am having problems trying to send emails using IIS 5.1 and ASP on a XP Pro box
I think that it is a configuration problem in my SMTP setup
I can send emails using Telnet but when I send via ASP they all end up in the Queue folder
ASP is not generating any error messages
Have tried code using CDO and CDONTS but I do not think it is a code issue
Sometimes I get a system event error saying that cannot do a DNS lookup on my send address
Any suggestions please
Properties for SMTP on my system:
General IP address : all unassigned
Access Relay: {my computer IP address}
Delivery Advanced Smart Host: mail.bigpond.com
Delivery Advanced Fully qualified domain name: {my computer name}
I'm using CDO object to send email but it doesn't send any email and it does
not give an error.
My code look like this: .....
My question is do ASP need to declare smtp server when send email using CDonts function?
View Replies View RelatedI am running Win XP and have installed the IIS SMTP service, however I'm not sure what I need to do to configure both the SMTP service and CDOSYS properly to allow me to send out email from an ASP script.
THE PROBLEM:
What is happening is the email is not sent and goes to the 'c:InetpubmailrootQueue' folder. I have checked the event viewer and the error I receive is:
Message delivery to the remote domain 'yahoo.com' failed for the following reason: The remote server did not respond to a connection attempt.
I believe the SMTP service isn't setup correctly or I haven't configured CDOSYS properly in my ASP script.
The CDOSYS part of my ASP script is setup as follows (I am using Javascript with ASP btw):
Code: .....
I have a CDONTS script which has been sending mail from a client's website form to their address. However, the script has suddenly stopped working after three years of working fine. It doesn't error, they just don't receive the mail any more. I've tried CCing myself in the script and can confirm the mail is not getting through. The script itself is tried and tested and syntaxially correct, and it is hosted on a windows 2000 server which has not been changed or reconfigured at all recently.
I think the problem is because they're using their own exchange server, not the web hosts' mail server. Therefore I would expect that mail sent from the web script wouldn't go through because there is no local mail server to process it.
The problem is that the script hasn't changed, the host say their system hasn't changed, and the client's IT team say their exchange settings haven't changed!?!
I could set up a CDOSYS script to use their Exchange server to deal with the email, but their IT support won't allow relaying, so I don't think this is possible.
Is connecting to their Exchange box the only option, or should the website host still be able to process the web-script-generated mail despite not being their mail provider? I'm getting a lot of grief here, but it can't be the script that has suddenly broken because nobody has touched it!
how do I get the response from the user to an email recipient?
View Replies View Relatedthe script works but i wanna have this email to be sent to more than one recipient (see below code in red). I did add another ObjMail1.To tag for another email recipient but doesnt work.
<%Response.Buffer=True%>
<html>
<head>
<title>Thanks</title><%
Dim salutationname,salutation,t1name,t1,t2name,t2,t3na me,t3,t4name,t4,highqualificationname,highqualific ation,checkname,check,MyNewRandomNum
Randomize
MyNewRandomNum = Round(Rnd * 100000000000)+1
salutationname = "Salutation"
salutation = Request.Form("salutation")
t1name = "Name"
t1 = Request.Form("t1")
t2name = "Telephone number"
t2 = Request.Form("t2")
t3name = "Email"
t3 = Request.Form("t3")
t4name = "Age"
t4 = Request.Form("t4")
highqualificationname = "Qualifications"
highqualification = Request.Form("highqualification")
checkname = "Options"
check = Request.Form("check")
Dim stname,st
stname = "Comments"
st = Request.Form("s1")
Dim ObjMail1,ObjMail2
Set ObjMail1 = Server.CreateObject("CDONTS.NewMail")
'CHANGE THE EMAIL ADDRESS IN QUOTES BELOW TO THE ADDRESS YOU WANT THIS MAIL SENT
ObjMail1.To = "info@abc.com "
ObjMail1.From = t3
ObjMail1.Subject = "Enquiry"& "" & "QUEUE NO: " &Trim(MyNewRandomNum)& ""
ObjMail1.Body = t1name & vbcrlf&_
t1 & vbcrlf&_
t2name & vbcrlf&_
t2 & vbcrlf&_
t3name & vbcrlf&_
t3 & vbcrlf&_
t4name & vbcrlf&_
t4 & vbcrlf&_
highqualificationname & vbcrlf&_
highqualification & vbcrlf&_
checkname & vbcrlf&_
check
ObjMail1.Send
Set ObjMail1 = Nothing
Set ObjMail2 = Server.CreateObject("CDONTS.NewMail")
ObjMail2.To = t3
ObjMail2.From = "info@abc.com"
ObjMail2.Subject = "Thanks for your enquiry."& "" & "Your QUEUE NO: " &Trim(MyNewRandomNum)& ""
ObjMail2.Body = " Hello " &"" & t1 & ".You have submitted your enquiry to us. You will hear from us shortly. " & "" & ":" & st &""
ObjMail2.Send
Set ObjMail2 = Nothing
Response.Write"<center />Thank You.You will hear from us soon. "
%>
</head>
</html>
The form I have created is intended to send a email to an address based on what subject the user selects. Right now the form processes fine, but I receive no emails.
Dim name, email, phone, subject, message, customer, advertisement, truck, objNewMail
name = Request.Form("name")
email = Request.Form("email")
phone = Request.Form("phone")
subject = Request.Form("subject")
message = Request.Form("message")
customer = Request.Form("customer")
advertisement = Request.Form("advertisement")
message = Request.Form("truck")
Set objNewMail = Server.CreateObject("CDONTS.NewMail")
objNewMail.From = Request.Form("email")
if ("subject") = "1" then
objNewMail.To = "mrowan@hackworthrepro.com"
'hri@hackworthrepro.com
elseif ("subject") = "2" then
objNewMail.To = "foundsheep@yahoo.com"
'dcs@hackworthrepro.com
elseif ("subject") = "3" then
objNewMail.To = "foundsheep@gmail.com"
'production@hackworthrepro.com
'else if ("subject") = "4" then
'NewMailObj.To = "bmaury@hackworthrepro.com"
'else if ("subject") = "5" then
'NewMailObj.To = "slinton@hackworthrepro.com"
'else if ("subject") = "6" then
'NewMailObj.To = "mmartin@hackworthrepro.com"
'else if ("subject") = "7" then
'NewMailObj.To = "jvivio@hackworthrepro.com"
'else if ("subject") = "8" then
'NewMailObj.To = "hri@hackworthrepro.com"
end if
objNewMail.Subject = "Message from HRI Website"
objNewMail.Body = "Name: " & name & _
"<br>Email: " & email & _
"<br>Phone: " & phone & _
"<br>Subject: " & subject & _
"<br>Message: " & message & _
"<br>Heard About HRI from: " & customer & _
"<br>" & advertisement & _
"<br>" & truck
objNewMail.BodyFormat = 0
objNewMail.MailFormat = 0
objNewMail.Send
Set objNewMail = nothing
Response.write "<p>Thank you for contacting Hackworth Reprographics, Inc. Your message has been successfully sent. You should expect a response from us within one business day. Have a great day.</p> <p>Return to <a href='default.asp'>Home Page</a></p>"
I use CDOsys and this code to specify the recipient. I guess I could create two separate instances of the objMail and specify everything one more time, but I want to send mails to two persons at once (the recipient and myself) and therefore wonder if there is a shorter way to do it.
View Replies View RelatedI want to send e-mails from my asp pages but don't know how to achieve that. I have tried to create CDO/CDONTS server objects but without luck. I guess I don't have SMTP installed or not configured appropriately.
Can you help me here? What do I need to do (and if complicated how is it done) to get an SMTP server up an running?
Since I want to be able to send a confirmation e-mail (containing user name/pwd etc.) to every visitor that enters some info in a form on my web page I wonder how that is done.
I have heard about SMTP and CDO but don't know the differences or which one is applicable in my case
I'm running xp-pro and use my computer as a web server but don't know if I have SMTP installed (or how to use it if it actually is there).
can we send email from our internal server without using an external SMTP provider?
View Replies View Relatedi've been looking EVERYWHERE and I can't find anything on how to send an email within asp. But not just an email, my smtp server requires authentication and i haven't been able to come across anything that supports sending username/passwords.
View Replies View RelatedI've been using CDOSYS Mail and this bit of code fine for a year. Well, we wanted to change the method of sending email from the Webserver sending it, to designating a specific SMPT server.
So, I found this code on MSFT's web site (MSFT CDOSYS SMTP ) that will allow me to do this, and it works, except that the redirect command that I have at the end of the file no longer works. I have no idea why.
Thi is the error I get:
error '8004020f'
/asp/send_email_foundation_conf.asp, line 78
Code: ...........
Is it possible to set up server-side mail services such that when someone
e-mails to a certain address, the contents attached to that mail are
processed and the processed content is returned to the user, again, as an
attachment?I installed a server-side component for managing graphics. "Wouldn't it be
nice," thought I, "if untutored staff could email graphics to a certain
e-mail address to have them resized and returned to them.")
I understand how to handle the graphics processing and the sending. I don't
understand how to set things up so that e-mailing to a certain address will
trigger the start of an application. Ideally you could do this all within
ASP. Is this possible?
I have Road Runner cable internet access and Im working in a local development environment (writing .ASP) and have a site running on my network on a windows xp pro machine via IIS with CDONTS installed.
When I try to send a confirmation email (simple text) via CDONTS the message is built but remains on the server in the QUEUE folder ... how can I tweak the SMTP settings on the server to allow me to send email out from the server...
just the occassional test as I develop sites - not looking to spam and have a fairly full featured router to block external access to SMTP machine so its not abused.
When a file is uploaded, notifications go out to Admins. Currently Admins have the ability to have 3 email addresses that the notification can be sent to.
Now lets say they only have 1 email address for a contact. When I run the code below, it cycles through to everyone that needs to be contacted and sends email to all 3 addresses.....BUT #2 & #3 are empty and then in my SMTP folder I receive a bunch of files in the badmail folder.
I need to correct this so that I can eliminate having to go and purge on a daily basis.
Now I am sure that there is a better way of doing this... I inherited this and am looking for some help with correcting this....
i used the following script but it won't send the email. any suggestions why?
<%
Dim TBdy
Dim MyCDO
CR = Chr(13)
Set MyCDO = Server.CreateObject("CDONTS.NewMail")
MyCDO.From = "person@something.org"
MyCDO.To = "allstar@aol.com"
MyCDO.Subject = "collegebound info"
TBdy = Request.Form("cb_name")
MyCDO.Body = TBdy
MyCDO.Importance = 1 (Normal)
MyCDO.Send
Set MyCDO = nothing
%>
I am working on a listing for sending emails via CDONTS component...
I have installed SMTP service on my machine and tried running the sample code....No errors appear, yet no mail is sent in the long run...All necessary services are up and running (IIS Admin, WWW and SMTP).
Another thing is that i have checked to see if Default SMTP Virtual Server is listed under the Internet Services Manager pane tree, but nothing seems to be there except Default FTP Site and Default Web Site....
The question might seem silly but...do i have to have a Mail Server installed.....?
How can i determine the cause that prevents the mail from being sent...Logs don't help much....Is there a way to detect the actual presence of the component...?
I'm new with asp and server thing so if somoene could help me to resolve my problems
it would be very great.
I'm trying to send myself an email but it doesn't work, no error message, I just don't receive any email.
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Sending email with CDO"
myMail.From="bob@hotmail.com"
myMail.To="bob@hotmail.com"
myMail.TextBody="This is a message."
myMail.Send
I'm using IIS at my home to test this code.
Our local educational host doesn't have any COMs on their servers so I need
to use the built-in (if there is one!!) mail/smtp component of ASP.net to
send web form data via email.
Is there such a thing in ASP.net? My apols for the newbie question, but I'm
still an ASP classic developer.
Could somebody post me an example of how to use it.
We currently have a form that is in PHP that after the user fill out the form and hit submit, this form send all the information via email to us. I like to know if there is a similar feature or way to do this in ASP.
View Replies View Relatedusing the code below is how to send email using asp;
<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Sending email with CDO"
myMail.From="martialdc@hotmail.com"
myMail.To="amboy416@yahoo.com.ph"
myMail.TextBody="This is a message."
myMail.Send
set myMail=nothing
%>
but i encounter this error;
There is a problem with the page you are trying to reach and it cannot be displayed.
attached with this thread is the file (send.asp) so that you can check it for sure.
I am trying to develop a web site which involve in log in n to retrieve password. When a user forget their password they will use this service, after they enter their email address, i will send their user id and password to their email which allow them to see their user id and password, but i don know to to do this service which will automatically send email to user email address when they click the button .....
View Replies View RelatedI've got an asp page that uses CDO.Message and
CDO.Configuration to send an email.
I'm not receiving any of these emails normally (i.e. in
Outlook), instead they all end up in this folder :
Inetpub/Mailroot/Queue.
Could someone please explain what this means? Does this
mean the emails have been successfully sent?...or are they
waiting to be sent?
I'm pretty sure my smtpserver name is correct because i've
got the same thing going in .NET and it all works ok there
(as in I get an email thru Outlook). Just can't seem to
get it going in ASP.
Not sure if it this relevant...I'm behind a firewall, so
i'm assuming the smtpserver name is for a smart host,
which is fine in .NET, but i'm not sure how that'll work
out in ASP (eg. what do i set the serverport number to?)
I've just downloaded a component called AspEmail (http://www.aspemail.com). When i tried to test my code using the localhost, it require sthe address of my SMTP server inorder to send the email.
I put "localhost" as the address but i cannot send the mail for some wierd reason. I check the badmail folder just to find some mails under the "queue" folder.
I've tried the same code in a different pc, and i got a different error: AspEmail: Simple.asp
Error occurred: Connection timed out.
Does any body know how to send email using that aspemail component on localhost
Appreciate it.
I want to implement a function to send emails to the registered users from my web site using ASP. The problem is that the web server provider I'm using does not support any email components (such as CDO, CDONTS, or third-party) or SMTP server.
Therefore I'm looking for some free email/SMTP provider which enables me to send the email information from my ASP web page to their server and it will forward it as ordinary emails to the recipients.
One way to do it could be to set up a html form with fields to hold the email information (recipient addresses, sender address, subject and body) and send it to the service provider. Something like: ....
<%
Set Mail=Server.CreateObject(“CDONTS.NewMail”)
Mail.To=”me@mydomain.com”
Mail.From=”testing-my@SP-Script.com”
Mail.Subject=”Just testing my script”
Mail.Body=”Hey! I am sending this email through an ASP Page and
guess what? I haven’t learnt much yet, but know that ASP is very
powerful.”
Mail.Send
Set Mail=nothing
%>
Can I use the above code, if my pc is running on Windows XP Professional Edition?
I'd like to get opinions on how this can be done. The brief background is that there is someone who, on a daily basis, puts together an email with links and text related to immunization.Would it be possible to automatically: receive this email; fit it into a database; then have a web page read the contents of the page from the database?
e.g., the web page could be told to present the text with the highest record number (assuming each new email is entered in as a new record).
I want to send an E-mail whoever registers to my website. How do I do it?
I visited www.w3schools.com but it is not working.