I'm getting this error when I try to connect to my SQLLite database. The initial file name is located on another server. Any ideas?
Microsoft OLE DB Provider for SQL Server (0x80004005)
Device activation error. The physical file name 'g:DORFMANROBBIE.mdf' may be incorrect.
/drintranet/clientcontact.asp, line 10
Code:
I'm using this coding but get some error. i can't understand this line
.Item(sch & "smtpserver") = "<enter_mail.server_here>"
mail server means which server im used help me
error:Error Type:
CDO.Message.1 (0x80040213)
The transport failed to connect to the server.
<%
sch = "http://schemas.microsoft.com/cdo/configuration/"
Set cdoConfig = CreateObject("CDO.Configuration")
With cdoConfig.Fields
.Item(sch & "sendusing") = 2 ' cdoSendUsingPort
.Item(sch & "smtpserver") = "<enter_mail.server_here>"
.update
End With
Set cdoMessage = CreateObject("CDO.Message")
With cdoMessage
Set .Configuration = cdoConfig
.From = "basvbas@yahoo.com"
.To = "basvbas22@yahoo.com"
.Subject = "Sample CDO Message"
.TextBody = "This is a test for CDO.message"
.Send
End With
Set cdoMessage = Nothing
Set cdoConfig = Nothing
%>
I have a form in my website and keep getting this error I was wondering if anyone could help out with this error message I keep getting
<!--#include file="email_validation.asp"-->
<%
Dim strMailFrom
Dim strMailTo
Dim strMailServer
Dim strMailSubject
' -------------------------------------------------------
' Stuff you need to change
' -------------------------------------------------------
..........
I eventually managed to create a connection between my IIS LocalHost ASP WebPages and my database located on a website on the net. Here is the solution:
Dim conn, connect
set conn=server.CreateObject ("adodb.connection")
connect = "Provider=MS Remote; Remote Server=http://www.example.com; Remote Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & server.mappath("database_filedatabase.mdb") & ";"
conn.Open connect
When I point my connection to my database on the net like in the code above I get the following error:
Error Type:
Microsoft ADO/RDS (0x800A2011)
Internet Server Error: Object/module not found.
Any Suggestions?
I get the follow error on a linux box that is running sun asp:
CDONTS.NewMail.1 error '80020009' unable to connect to server
The error occurs when the Send Command is Executed. Here is my code:
The example I am working from uses the following code which does not work:
RDS.Connect = "Provider='sqloledb';Integrated Security='SSPI';Initial
So I tried the following, but still no go. Code:
The example I am working from uses the following code which does not work:
RDS.Connect = "Provider='sqloledb';Integrated Security='SSPI';Initial
Code:
I am getting:
Error Type:
Microsoft VBScript runtime (0x800A01A8)
Object required: ''
/theborg/includes/dbconnect.asp, line 4
I can't figure it out. It worked fine while testing in access. Though there is no data in the SQL database yet. But when I try to populate the data I get the same result
dbconnect.asp:
Code:
<%
Dim objConn
objConn = Server.CreateObject("ADODB.CONNECTION")
objConn.Open "DSN=Assimalation"
%>
Homepage.asp
Code:
i have file and database on remote server, and i want to connect via DSN. i make DSN over there. and when call that dsn in code. it gives null user error.
if i pass user id and password with dsn it connect other wise error occurs
if i have a DSN then why i should pass it again.
how can i solve it.
I got read a lot of attachment about how to connect ASP to SQL server but i still got problem about it. either i use which ways(there are 2 ways connect it)... it always has this error.
Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection.
May I know what is it mean? how to solve it
I have uploaded a *.mdb to a remote server. ive setup a dns there for the mdb, ive done a test on the mdb on the remote server- all is ok. But when i try to connect to the dns/mdb via the dreamweaver interface, i get this error message:
http://www.britanniacabinets.com/error.gif
I have an existing web app on a remote server that I want to manage as a web project on my local box with Visual InterDev. But when I create a new project in VID and connect to the web server, I cannot connect to the existing web app.
At the "Specify your web" dialog box I choose "connect to existing web on server" but the only option that shows up is <root web>. I cannot overwrite this option with the name of the web I want to connect to
I can see this web application in the IIS Manager on the remote server and it is configured as a web application. It accessible in a browser. Why won't it show up in Visual InterDEV?
My asp application is connect to oracle database. However, when i try to open the default page, an error occurs and i receive this message:
- Error Type:
Microsoft VBScript runtime (0x800A01B6)
Object doesn't support this property or method: 'MoveFirst'
The code that is causing this error is following:
Code:
<%
Dim objConn
Dim rsForums
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.Open "dsn=ORCL9; uid=toy; pwd=yes;"
Set rsForums = Server.CreateObject("ADODB.Recordset")
rsForums = objConn.Execute ("SELECT * FROM Forums ORDER BY Forum ASC")
rsForums.MoveFirst
%>
<table width="100%" align="center" cellspacing="0" cellpadding="6" border="1">
<tr>
<td width="60%">
<p><b>Forums</b>
</tr>
<%
While Not rsForums.EOF
%>
<tr>
<td><a href="forum.asp?ForumID=<%= rsForums("ForumID") %>"><B><%= rsForums("Forum") %></B></a>
<BR>
<BLOCKQUOTE>
<%= rsForums ("Description")%><BR>
<SMALL>[Total Posts: <%= rsForums("Posts") %>] [Last Post on <%= rsForums("LastPost") %>]</SMALL>
</BLOCKQUOTE>
</tr>
<%
rsForums.MoveNext
Wend
rsForums.Close
The forums table in the oracle database has 2 lines of records, and it should not occur this error. Do you have any idea what is happenning?
I'm trying to create a connect string, but I might have a unique situtation. When connecting to Query Analyzer, I connect using RUNAS specifying domain and username. Is it possible to create a connect string given the above requirements? Here's what I'm trying to use:
<%
Set demoConn = Server.CreateObject("ADODB.Connection")
demoPath="DRIVER={SQL Server};" & _
"SERVER=myserver;UID=username;" & _
"PWD=pw;DATABASE=qdb"
demoConn.open demoPath
%>
I am trying to connect to my access DB. I am developing my site in Dreanweaver and I have the site hosted already. I want to use the hosts server as my testing server.
When I create a connection string to the DB I have to use the servers directories. ex: e:/hshome/site/something.mdb When I try to add a server behavior to a form it can't find the DB. What am I doing wrong ?
I am running a website on anintranet on one domain and trying to connect to a SQL database that is in another domain. The server that is running the website does not have SQL Server installed on it. I've looked at many different variations to set this up but none have been successful so far.
View Replies View Relatedi have 2 database server...........
i have a pages that need to get data from 2 server.......
so, i open connection when want to get data.....
but this page, i need to get data from 4 table in server1 and 3 table from server2......
table in server1 have relationship with table server2.....
so, i always open connection to server1 and get data..then close.....then open connection to server2 and close........
I have an access database that I need to put online for basic viewing. However, the database is also used by other people for updating and report printing. The web server and the access database are on two seperate servers. I cannot connect directly to the database cause if somebody has it open, the website will not work and for some reason I cannot connect to to database across servers. I tried a linked database, but asp will not recognise it.
I know that I could put all the reports and stuff online, but I have till next week
and I do not think that I can do it in this short a time. Any ideas will be helpful and if there is code that I need to manipulate I could try to do it. And also I do not have rights to configure the IIS option on the servers.
I'm having a hard time figuring out what type of database is used and where the file is located and how the script is even acessing it. From what I've done in the past with ASP a file was always used that had a DSN, username, and password.how this code is access the database without a username/password/DSN? I've tried using the login info in the line that is commented out (line 2) but it wouldn't let me in so I guess this isn't being used.
Code:
Set objDbConn = Server.CreateObject("ADODB.Connection")
'objDbConn.Open "driver={SQL Server};server=db1.host.com;database=databasename;uid=login;pwd=password;"
objDbConn.Open application.contents("strconn")
Set rsQuery = Server.CreateObject("ADODB.Recordset")
rsQuery.ActiveConnection = objDbConn
rsQuery.open "sp_MajorList"
Set rsetQuery = Server.CreateObject("ADODB.Recordset")
rsetQuery.ActiveConnection = objDbConn
i want to connect an ASP page to a dbf file(dbase III), but so far i have failed..., i found an example on internet and i tried to changed it to ajust my needs... this is the code:
View Replies View RelatedI have just installed PWS on my Win98 SE machine. Even though i change my internet connections to "Never dial a connection" it still tries to connect when i try to view my asp pages.
Presumably there is some simple option i need to change which will allow me to run my scripts without connecting to the internet.
I have seen 2 techniques to connect to database and was wondering which one is the best (i.e put less pressue on the database and time wise)
set getRecords = Server.CreateObject("ADODB.Recordset")
getRecords.ActiveConnection = mlConn
getRecords.Source = "SELECT * FROM myDB"
getRecords.CursorType = 1
getRecords.LockType = 3
getRecords.Open()
----OR----
set getRecords = mlConn.Execute("SELECT * FROM myDB")
I want to connect my ftp server using ASP,how can i connect? Is there any method to do this. If any one knows the solution please let me know. I know how to connect database on ftp server,but now i want to connect to ftp server only. If any related solution urls for this problem please let me know.
View Replies View RelatedI am currently trying to get back into ASP and have begun looking at an old webpage I developed some years ago, it was fully functional back in 2002 and I had it up and running with no problems. I have just recently bought a new PC with Windows Vista Home Premium on it and installed IIS. When I try and connect to my data base I get the following error message retunred:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Disk or network error.
/joynermorgan/take_registration.asp, line 50
Line 50 looks like this:
writeDB.Open "joynerm" ....
What is the best way of connecting to a database? Is it creating an application level variable which is shared by all users ? Or is it a session level variable for each session ? Or is it a connection in each procedure ? Or Should it be like opening the connection when the database is accessed and closing it immediately which means multiple opening and closing in the same procedure.
View Replies View RelatedI have the following line which works great. Code:
<!--#include file="connect.asa"-->
I have this file in a folder called private. I also have the majority of what I call public files in a folder called public. How do I use an include statement to point to a file in another directory. My folders are setup as follows:Top titans, the two sub folders under titans are private and public.
needed to connect mysql with ASP.
View Replies View RelatedI created an page that runs with an access database, but I can't get it to work on the clients server, although it works locally.I'm getting this error:
Sun ONE ASP VBScript runtime (0x80004001)
Function or method call not implemented: 'Provider'
This is the script:Code:
Set oConn = Server.CreateObject("ADODB.Connection")
'oConn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & filePath
oConn.Provider="Microsoft.Jet.OLEDB.4.0"
oConn.Open filePath
Neither options in the script above work, although they both work locally.I think it's because her site is on a Linux server running ASP with SunOne. Am I correct? How do I sort out the problem?
It is indeed DSN. I found my server provider nicely provides a window where one can automatically set up a DSN to any database in the data folder. I suppose one can set up as many connections to as many databases as the system will allow, in a couple of minutes.
View Replies View RelatedI had used ASP about a year ago, I had connected to a *.MDB database but not MSSQL,can someone please throw me the just of it
View Replies View RelatedCan I know the way to connect Crystal Report 8 to VB 6?..Any sample code that I can refer to?
View Replies View Relatedam trying to connect to an oracle db. I'm not sure if I need a whole path or what am I doing wrong here?
Username = Request.Form ("UserName")
Password = Request.Form ("Password")
Source = request.form ("source")
If username="" Or Password="" Then
Session("Error_message") = "User name and password are required."
Response.Redirect("loginerrorentry.asp")
End If
Set conn = Server.CreateObject("ADODB.Connection")
Set rs = Server.CreateObject("ADODB.Recordset")
'original connection string
conn.ConnectionString = "msdaora.1;Password='" & Password & "';User ID='" & Username & "';Data Source="clscen;"
I have installed wamp5 on my laptop so I can develop php pages with mysql.I have started the wamp5 which give you a semi circle and three quarters of the icon is shaded yellow - this is supposed to mean that apache is running. I then type in http://localhost in the address bar and I get the "page cannot be displayed" error.
This is weird because wamp says apache is running ok.Is there any other setting that may affect the connection?If this is any help, I also have a sneaky suspicion that because I have visual studio.net installed on my laptop there may be a conflict with IIS? I have not developed any sites with visual studio yet but could there be a conflict here? Thing is, I am not sure what to look for or change?