Connection Error
I have two servers: Webserver(WebServer) and Database server(DBServer).
In Webserver, i asp to connect to sqlserver in dbserver. but i can not
connect it, it show error "No Trust Connection"
but the save connection string, when i used it in VB, it is ok. Also i can
connect from webserver to dbserver by using Analy Query, it is ok
please help "How to connect it". below is my asp code:
<%
set cnt=server.createobject("adodb.connection")
cnt.open "Provider=SQLOLEDB.1;Data Source=Dbserver;Initial
Catalog=MyDB;Uid=dbadmin;pwd=root"
View Replies
ADVERTISEMENT
I have put a chat site on the web that I have got off here a while ago. It contains an access db. I am now getting this error ;
ADODB.Connection.1 error '800a0bb9'
The application is using arguments that are of the wrong type, are out of acceptable range, or are in conflict with one another. /TheChatroom/includes/OpenDB.asp, line 5
It works on my PC through IIS 6. Does anyone know what is wrong?
View Replies
View Related
The error I am getting is the following: ADODB.Connection error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another. Code:
View Replies
View Related
I have currently found an ASP based website that i developed about 3 years ago and am very keen to get it up and running, it's quite a simple site, however when i try to do anything with the database i have a problem with the DSN Code:
View Replies
View Related
what I have done wrong with this file that is used toconnect the database .
View Replies
View Related
I have an unusual problem and am stuck trying to solve it. My code worked fine last week and hasnt been altered since. I now get the following error:
Microsoft JET Database Engine error '80004005'
Cannot open database ''. It may not be a database that your application recognizes, or the file may be corrupt.
/Cs_Jobs.asp, line 41
The code i am using to acces the DB is: Code:
View Replies
View Related
My database is on another disk partition. When I try to run the following code to make a connection to my DB. I get an error message.
"server.mappath must use a virtual path, physical path has been used"
How can I fix it?
strDataPath = server.MapPath("T:databaseTest.mdb")
strConnectString = "Provider=Microsoft.Jet.OLEDB.4.0;"_
+ " Data Source= " & strDataPath & ";"_
+ " Mode=Share Deny None;User Id=admin;PASSWORD=;"
View Replies
View Related
I got this error :
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57c4 Thread 0x3474 DBC 0x1234284 Jet'.
/cs/DBConnection.inc.asp, line 25
The code for DBConnection.inc.asp ;
Code:
View Replies
View Related
i have the following error
Microsoft VBScript runtime error '800a01be'
Object doesn't support named arguments: 'ConString'
/asyama/productsBySpecial.asp, line 165
from the following code:
View Replies
View Related
I recieve the following error
Microsoft[odbc driver manager] data source name not found and no default driver specified
my code is as follows and works fine in excel . I have a user dsn set up called Sage and a system dsn called sage so don't think thats the problem
any help will be well appreciated
Dim sSQL
dim conn,rst
Set Conn = Server.CreateObject("ADODB.Connection")
Set rst = Server.CreateObject("ADODB.RecordSet")
//get error on next line
Conn.Open dsn="Sage", "TestUser", "correctpassword"
View Replies
View Related
i'm using this string to connect to my database whic resite in the other computer of my network the connection is like this set objconn = server.createobject("ADODB.Connection")
objConn.Open
View Replies
View Related
I am getting following error on one of My Windows 2000 server with IIS 5.0
ADODB.Connection error '800a0e7a'
Unknown runtime error
/sales/order2e.asp, line 16
How do I fix it . MDAC 2.7 and 2.8 is installed on the server.
View Replies
View Related
following error:
ADODB.Connectionerror '800a0bb9'
Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.
/vyrna/index.asp, line 165
i checked & re-checked my code but didnt get why it says conflict with one another. line 165 is this code:
View Replies
View Related
I load my server a little bit and now it give me this error when I want to connect to DB:
Quote: Provider error '8000ffff'
Catastrophic failure
/rddb/intranet/scripts/headintranet.inc, line 87
I use the following connection string:
Code:
View Replies
View Related
i keep getting this error:
ADODB.Recordset error '800a0e7d'
The connection cannot be used to perform this operation. It is either closed or invalid in this context.
/rces/insert-script.asp, line 108
here is the code with the highlighted problem line
Code:
View Replies
View Related
i have a connection string (this all in asp )
tCSCst = Provider=SQLOLEDB;Data Source=<bd>;Port=1444;Initial
Catalog=<cataloge>;User ID=<id>;Password=<password>
Set testCaseServerConn = Server.CreateObject("ADODB.Connection")
testCaseServerConn.Open tCSCstr
but i get the following error:
An error occured:-2147467259 - Invalid connection string attribute
the problem seems to be the port itself, if i use 1433 then it works
View Replies
View Related
I'm getting the following error: I need to insert a record into one table, grab the autonumber key (Register_ID)and insert multiple records into another table with the key. Does anyone know why I'm getting this error and how I can correct it?
ADODB.Connection error '800a0bb9'
The application is using arguments that are of the wrong type, are out of acceptable range, or are in conflict with one another.
/Check2/submit_registration.asp, line 44
Line 44 is:
connupdate.Open "WebRegister", strProvider, adOpenKeySet, adLockPessimistic
Here is my code:
View Replies
View Related
I have uploaded the site and when I browse to I get the following error:
Microsoft JET Database Engine error '80004005'
'C:DBdatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
/inc/connect.asp, line 31
This is my database string
db_str = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=C:wwwuserDBdatabase.mdb;"
What are we doing wrong?
Do we need to set up 'ODBC Drivers : Microsoft Access Driver (*.mdb)' in Hsphere? (If so, can anyone point me to a good tutorial please)
Also - do I need to set file permissions?
View Replies
View Related
I'm now getting a Type mismatch error and am stumped. I have the following lines of code and am really trying to learn this, but I've been stuck on this one for a few hours now. It tells me that the mismatch error is on the last line. Code:
dim connectionToDatabase
dim database_select_submitted
dim id
Set connectionToDatabase=Server.CreateObject("ADODB.Connection")
connectionToDatabase.ConnectionTimeout=60
connectionToDatabase.Open "DSN=international_hotlines"
id=Request("id")
database_select_submitted=("SELECT * FROM hotlines WHERE incrementing_number=" & Request("id") & "")
connectionToDatabase.Execute(database_select_submitted)
Response.Write database_select_submitted("receiving_record_number")
View Replies
View Related
Im currently working on a site that uses a news manager to post news articles on the site. However when i open the page i get this error in the news frame:
ADODB.Connection.1error '800a0bb9'
The application is using arguments that are of the wrong type, are out of acceptable range, or are in conflict with one another. conn.asp, line 5
the code in conn.asp is as follows: Code:
View Replies
View Related
I am having a problem with a system of banner, it walks presenting in all the pages this error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1b98 Thread 0x2444 DBC 0x8499024 Jet'.
/banner/include/admentordb.asp, line 42
They see what it exists written in line 42, where it accuses the error Code:
View Replies
View Related
I'm working on a quick wrapper so that I can connect to a database, run a quick query, get the needed info and pass it on to the next page that needs it. I've been programming for a long time but not with ASP/VBscript and think it's just something stupid that I've overlooked. Code:
View Replies
View Related
I am not able to connect to a MS Access Database..,, I am using a DSN Connection,
The Error that the asp page(having Database code) is showing everytime is....///
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] The Microsoft Jet database engine cannot open the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view its data.
/airtickets/scripts/dbconn.asp, line 4
i havent opened the database bfore, & no other app. is accessing it ..
View Replies
View Related
I am using Dreamweaver MX 2004, and I am having one heck of a time connecting to a SQL Server DB. I can connect to the DB when I am using an ASP page and connecting with a local DNS, but I cannot connect when creating an ASP.NET and trying to connect with either an OLD DB Connection or a SQL Server Connection.
I am actually getting a "Connection Successful" when I am connecting with the OLE DB but as soon as I hit "OK" then no tables are found. When I try and test my connection once I out of the OLE DB connection GUI I get the following Error:
HTTP Error Code 500 Internal Server Error - This is very vague, and none of us can seem to figure it out. Anyone else have this kind of problem?
View Replies
View Related
I seem to be getting this error, and after Googling and searching this site, I still can't get a grip on it. I have a site on a server which is being developed for a national company who will offer this site to their members, hosting each on the national orgainzations servers. I have this string -
openStr = "driver={Microsoft Access Driver (*.mdb)};" & _
"dbq=" & Server.MapPath("../databases/srt.mdb")
Which results in this error:
The '..' characters are not allowed in the Path parameter for the MapPath method
Ok, the common solution seems to be a configuration on the server, which wouldn't be a problem IF the site was to remain where it is. BUT, seeing as I will give this site to the client, who will host it on their servers, could this configuration "fix" be a problem, perhaps for security issues.
View Replies
View Related
could somebody help me with the ASP code to redirect user to "loginfail.htm" page when an attempt to connect to a database fails.
View Replies
View Related
How do i connect to Oracle Database through ASP? I have Used the Following Syntax But it gives me ADODB .Connection error no as '800a0e7a' saying Provider Cannot be Found.
set objcn1=server.createobject("Adodb.connection")
objcn1.Open "Provider=OraOLEDB.Oracle;Data Source=servername;User Id=abc;Password=cbs"
OR
objcn1.Open "Provider=msdaora;Data Source=servername;User Id=abc;Password=cbs"
View Replies
View Related
Not sure if this is the right place but I need to get this website going and am having problems with the ODBC driver connecting to the SQL server When setting up the driver I am getting a sql error 18452 login failed reason: not associated with a trusted SQL connection I am at a loss as I installed this on another machine and it worked.
View Replies
View Related
I am now all of a sudden getting an error in this sql connection
string, saying that the Provider keyword is invalid:
<add key="MM_CONNECTION_STRING_isox"
value="Provider=SQLOLEDB;SERVER=xx.xx.xx.xx;UID=xx;PWD=xx x;DATABASE=xxxx;"
/>
View Replies
View Related
Error info is as follows:
HTTP 500.100 - Internal Server Error - ASP error
Internet Information Services
Technical Information (for support personnel)
Error Type:
error '8002801c'
Error accessing the OLE registry.
/iisHelp/common/500-100.asp, line 154
Is ADO a separate install? And from where?
View Replies
View Related
1.
conn.ConnectionTimeout = 60
conn.Open connString
2.
conn.Open connString
conn.ConnectionTimeout = 60
Do both of them give different?
View Replies
View Related
I wanted to know wheather DSN is ok for the connection to a database or direct conection is better?
when i started my web project on dreamweaver i had to make a DSN connection as i have followed the books, but as now as i have also asked several questions on this site, i have aslo implemented a direct connection as well on some pages, now i am wondering
is this going to have any affects when i uplode the complete site on the server.
i have noticed that on my computer when i am testing the site and uploading new records on sections that have DSN connections you can see the new record but on sections that i have implemented direct connection i cannot see it coz it is linked to the local directory database not on the testing server.
i have also never experienced uploading to a IIS server with DB connection so its my first time with dynamic websites. so am i in trouble or its ok the way i have done my site..
View Replies
View Related
I got an error saying
Microsoft VBScript runtime error- Error '800a000d'
Type mismatch
/briansforums/default.asp, line 923
also another error called Code:
View Replies
View Related