Converting Seconds Into Time

I need to convert seconds into time since for a message board application.

"minutes ago, hours ago and days ago" etc.

I have capture the time of the original post and compared it to the time now getting seconds but having a little trouble working out the seconds into time. Have used calculations (/60 minute), (/3600 hour), and (/86400 hour) but the time remaining is bugging me.

View Replies


ADVERTISEMENT

Converting Seconds To Minutes

I have a column in my Access db that stores a number which is supposed to be seconds. How can I convert the seconds to display mm:ss on my ASP page? For instance, if the number in the db is 300, I want it to display 5:00 on my page.

Now these are lengths of time, not current time (AM or PM), so I dont want it to display the AM or PM. I've tried format(rs("length"), "nn:ss") and that didnt work. Matter of fact Format(), FormatDateTime(), and FormatNumber() doesnt work on my page. I've been getting the 800a000d Type Mismatch error. What am I doing wrong? Code:

View Replies View Related

Seconds Portion Of Time

I'm having a problem with this code:
Code:

<input type="hidden" name="lastdate" value="<%=now%>">

not returning the "seconds" portion of time. It writes the date and time - but only to the minute. The seconds are 00 each time. Ex. 1/29/2005 1:47:23 PM is what I want and 1/29/2005 1:47:00 PM is what I'm getting.This is the result I'm getting on two separate DB's on two different servers. I'm sure there's some glaring problem I'm overlooking because I sure can't see it.

View Replies View Related

Time Difference In Seconds

I'd like to find the time difference in seconds in my ASP-code, but can't find how to do this. In php you have the time() that give the seconds from 1.1.1970 (?) until now. Is there something like this in ASP too? I have found the DateDiff that one just gives days, right? I basicly want to have two variables, time1 and time2, and show the seconds between them.

View Replies View Related

Time Format: Get Rid Of Seconds

I have a simple calendar scipt that ask for time of event input. While I like the time feature I do not like the fact that it displays with seconds included.

Ex. Displays HR:MIN:SEC 5:05:30 PM

Desired display 5:05 PM

How do I get rid of the display showing seconds? I have changed the database format, but this does not seem to effect the disply on the asp page.

View Replies View Related

Page Generation Time In Seconds

The code to show how long it took the page to generate in seconds ?!?, if you get onto the main page of this site, www.tgplus.net and loom at the left had side, it tells you how long it took the page 2 generate.

View Replies View Related

Converting US Time To IST

Do we have any function in ASP that will convert US time(which is captured in the database) to IST

View Replies View Related

Converting Local Time To UTC

1. I need to convert the local-time of the server on which I run my website
to UTC and I don't want to rely on the server local time and timezone (i.e.
I don't want to hardcode the timezone information), is there a generic way
to do this?

2. Is there a general for converting time between timezones in ASP?

View Replies View Related

Converting The Time Format Throw Asp?!@

i use this code to convert the date format throw asp. so it could work well with me sql server Db Code:

strSQL="select * from Visit where convert(datetime,visitdate,103) = convert(datetime,'" & date() &"',103) ORDER BY visittime"
rs.Open strSql

but u try to convert the tme form also in the same way but it doesnt work , so anybody have any idea how could this be done? Code:

View Replies View Related

Timestamp In Seconds ?

i need to get the number of seconds since Jan 1, 1990 or 70 or something to compare session times ... how do i get the timestamp in seconds ...

btw the msdn library is not a very good one ... does any one know an asp manual simillar to php (downloadble) ...

View Replies View Related

Trimming Seconds

Code:

StartTime = FormatDateTime((rs("startdate")),3)

this returns

7/4/2006 1:00:00 AM

I need to trim the seconds off so it looks like this

7/4/2006 1:00 AM

View Replies View Related

Date Difference In Seconds

Basically I have 2 times:

timea = (date here) 12:00:00 PM

timeb = now()

and what i want to do is compare the difference in seconds between the two.
But I'm struggling and the thought has crossed my mind that DateDiff only works with dates not times...

Code:

<%
Dim DateToCompareTo
DateToCompareTo = 4/10/2005 1:00:00 PM
%>

There are <%= DateDiff("s", Now(), DateToCompareTo) %> seconds left %>!

View Replies View Related

Seconds To Date Format

I have a variable that returns a certain number of seconds. Is there a function that can format this into something more useful?

For example, if the variable returned is 32, then it would format it to say "32 seconds"

If the variable is 312, then it would return "5 minutes and 12 seconds"

If the variable was 7315 then it would return "2 hours, 1 minute, and 55 seconds"

And so on.

View Replies View Related

Response.Redirect In 5 Seconds?

Is there a way to response.redirect to a url within 5 seconds or something, so its not right away? I was thinking meta refresh, but everywhere I go online it says that meta refreshes are not a good idea.

View Replies View Related

Redirect A User After A Few Seconds

I'm trying to set up an asp script that redirects a user after a few seconds on a page- I cant use meta tags to redirect due to the page structure.does anyone have any similar scripts they could share?

View Replies View Related

Delay, Sleep For 8 Seconds

What is the best way to do an ASP/sleep for 8 seconds (pause script for 8 seconds)? I have tried the following:

EndTime = Now() + (8 / (24 * 60* 60)) '8 seconds
Do While Now() < EndTime
'Do nothing
Loop

But unfortunately that keeps the CPU at 100% for that time. I need something that doesn't impact the CPU, as this delay will be in a while loop that will execute continuously for a few days.

View Replies View Related

Years, Months, Days, Hours, Seconds

Been playing with the function DateDiff, and with it it's easy to calculate the difference in years/months/days between two dates. However, if i wanted to calculate the difference in Years, Months, Days, Hours, Seconds (a la Ebay bids) how can I do this? Is it easy or complicated?

View Replies View Related

Countdown Timer By Day, Hour, Minute And Seconds

how to do the count down timer? which their is count down timer for sepacific day, hour, minute and second.

View Replies View Related

I Am Having Problems With Calculating The Total Seconds From Two Date/times.

I need to get the number of seconds when subtracting two date/times.
With the code I am using below I subtract the two date/times and end
up with a total of days like "1.56".

Then when I multiply it to get
the number of seconds I am not getting an accurate number. I should
only have whole numbers of seconds with nothing past the decimal
point. I would like to be able to subtract the two date/times and get
the number of seconds without multiplying to get it. Is this possible?
Does anyone have a better more accurate way to do this? Code:

View Replies View Related

Time Calculation :: Difference Between Login And Current Time

I would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.

View Replies View Related

ASP To Re-load Page From Time To Time To Reset Varaibles

I have a website that I subscribe to that allows me to track tasks. I have an extra computer with a big monitor that i want to always display the task list. the problem is after so many hours I get logged out.

I need to need to reload that sign in url every few hours Code:

View Replies View Related

Comapring Database Time And Computer Date/time

there i was just windering how do i compare a date/time vlaue in sql server agaisnt the computers' date/time.
for example, if computer date/time is two months or 2 weeks before the database date/time do something

View Replies View Related

Time/Date Format And Changing Time To GMT

Currently working on a ASP for a friend, which requires the date and
time on it. It pulls in entries from an Access Database with dates and
times in the format of:

"Fri Oct 17 18:02:46 2003"
However my date and time on the ASP page is displayed as:
"Friday, October 17, 2003 18:02:46"
using the script:
"<%Session.LCID = 1033%>
<%=FormatDateTime(Date(), vbLongDate)%>
<%Session.LCID = 2057%>
<%=time()%>"

Anyone know how to change this script, fully or partly to produce the
date and time on the format that's in the access database i.e. "Fri Oct 17
18:02:46 2003" Code:

View Replies View Related

Time Convert String To OdbcType.Time

I am working on a database that collects information about incidents. One of the fields that people enter is the time of the incident. I am trying to convert that string that people enter into a OdbcType.Time and I am at a lost.

View Replies View Related

Local Machine Time To Eastern Time

How will we convert the system date & time to other timezone for eg: Eastern Time zone using ASP?

View Replies View Related

Time Function Returns Wrong Time

When the Form is submitted I use the Date() and Time() functions to put the date and time into the Body part of the e-mail. The time reported is three hours earlier than the time at which the Form is actually submitted.

I understand these functions are evaluated on the server so the server must be in a time zone three hours earlier than where I am . Is there any way I can get the local time at the location where the user is actually located. ?

View Replies View Related

How To Get Asp Execution Time And Database Connection Time ?

Any some tools or sample codes drop down asp script execute time and
database connection time ?

View Replies View Related

Server Time Local Time Convert

I'm trying to do a very simple code that converts the server time into a time zone of your choice.

<%
dim h 'Current Hour
dim i ' Time Zone Increase - add or subtract hours
dim r 'Result Here
h = Hour(Now)
i = + 2
r = h + i
%>

but obvisouly i'm having trouble with the time zone convert.

View Replies View Related

Compare The NOW Time With A Deadline Time

I am trying to compare the NOW time with a "deadline" time. Please help. Just not sure why this is not working. I need to be able to say IF IT'S BEFORE 9:30 TODAY, IT'S OKAY TO ADD SOMETHING. IF IT'S AFTER 9:30 TODAY, YOU MUST ADD IT TOMORROW.

CODE:

nowtime=now()
deadlinetime=formatdatetime(now(),2) + " 8:30:00 AM"
response.write "NOW: " & nowtime & "<BR>"
response.write "Deadline: " & deadlinetime & "<BR>"
if nowtime<deadlinetime then response.write "can send out today" end if
if nowtime>deadlinetime then response.write "must send out tomorrow" end
if

RESULTS:
NOW: 1/18/2007 8:51:43 AM
Deadline: 1/18/2007 8:30:00 AM
can send out today

As you can see, NOW is GREATER THAN Deadline, so it should must send out tomorrow.

View Replies View Related

Time Calculation :: Between Two Dates And Time

i want to calculate the total time between to dates and time.

Example: Total time elapsed from date 1 time 1 to date 2 time 2.

27/09/2004 11:00 - 28/09/2004 10:30

The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.

View Replies View Related

Converting Hrs And Min To Just Min

I am using two fields on a form to capture time someboby is working. The fields are hours and minutes. How can I when submitting to the db take both fields and convert them to a single field in the db as minutes?

View Replies View Related

Converting PDF To DOC

I'm looking for a control to us on our web site that will take our reports
that are generated in PDF and convert them to DOC format all on the server.
We are using win2k3 web servers if that helps.

View Replies View Related

Converting VBA To ASP

I have developed an access database with VBA. Right now its on a network drive and is shared by 75 users. Works fine.

Now I would like to have this in the company intranet. Is it advisable to go with ASP? I recently installed IIS in my system. After that I have no idea how to convert my application to ? Is there a website or any walk through how to get my stuff's solved.

My application has 20 input screens, data add, save, update and also sends email based on certain rules. Is it possible to do all these stuffs?

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved