Count And Display Number Of Records In Table
how can i Count and display number of records in table?
View Replieshow can i Count and display number of records in table?
View RepliesI know I've asked this before, and other people have too. But when I use that igrep search thing, almost all of the search results are scambled (when you clikc on a search result, its just a scambled up thread).So I'll ask again, because I have forgotten. I know that to count the entries in a recordset, you usethe following code...Code:
RS.RecordCount
But I know that you need something else, something about a client-side pointer? Without it Im just receiving -1 each time.
Trying to duplicate the functionality found on this page:
I have a new table i've created that stores peoples search queries:
INDEX, SEARCH, COOKIEID, CID, SUCCESS, DATE
I have a seperate table that stores my product data, including the keywords. My search function uses a LIKE %%examplekeyword to match searchs to the DESCRIP column in this inventory table.
How can I make one SQL query to display the same results as on the the example page? It's easy enough to SELECT the results, but how do I do a count of how many instances of that search word exist, inside the same SQL statement?
This is the code of the page that should display a column of records (categories of my blog), next to the number of articles contained in each category. Code:
View Replies View RelatedI'm trying to count all the records in a table [for which I'm using count()]and display a number for each record. Ofcourse the number is not being pulled from the DB. So my doubt is when we display all the records of the DB can we just assign 1,2,3.... to each record that is being displayed? Code:
View Replies View Relatedhow do I display only n number of records? then create links to the next set of n?
View Replies View Relatedi need to go through a list of items and check to see if items on list 1 are on list 2 and vise-versa. so im going to look at item 1 on list 1, and go through all the items on list 2. if i find a match, ill update the record on list 1, if i dont find a match ill update the record on list 2.
im going to need a nested loop. in c++ i know how i could do this, but im not sure as how to do it in vbs/asp. can you do for each "record" in "myrecordset"? or do i have to get the number of records in the table and run the loop that many times? which would be eaister?
I'm trying to display records from a table in a sql database.The problem is, every month a new table is created, so I don't know what the name of that table is going to be.
It there a way that I can make sure the sql only reads from the latest created table?
I'm trying to display records from an MS Access DB (*.mdb) in an ASP page (table).. I don't want to display all the records though, I just want to display the total of these records..i.e in my table I would like to show how many calls someone has closed this year..(number)
Joe Bloggs ---> 100 Closed
Is this possible? I was thinking that I need to write an ADO that includes COUNT but I'm not too sure how to write this.. Here's what I have so far: Code:
How can I count a number of characters in a variable.for example I have intTest = 19483, how to get 5?or strTest = "TestTest" how to get 8
View Replies View Relatedhow to Count the number of characters in a variable?
View Replies View Relatedhow can i count how many words have i written in a text area? Liek taking an example ... i am writing in this textarea of devshed forumns. and say in total i have written 50 words .. how can find out this information?
View Replies View RelatedThe problem concerns 2 tables, cart_products and cart_shoppingcart.
Cart_products contains all the product data (eg, prices, product's key name, etc), but most importantly, it contains the quantity of stock (prod_quantity) for each item.
cart_shoppingcart contains all of the user's items in their shoppingcart, including those that are part of an (customer) order; these have the order_number to differentiate from those that aren't in any order (their Order_number is 'no_order', the others have the order number).
Now, what I want to do is this:
For every item in the order (ie, every entry in cart_shoppingcart that matches the username and order number), take the quantity (x) the customer is ordering, then take the quantity of stock remaining (y), then subtract x from y to create the new stock level (z) and update the appropriate record in cart_products with z (all this with SQl preferably).
I was thinking of using a Do while loop, but realised that it wouldn't work as I'd have to use several SQL statements and then I'd run into a problem the minute ASP reads "objrec.movenext".
I have created a form which asks the user a series of questions. I am able to retrieve the information from the database but I need to know how many rows of data has been entered for each question.
For example I have a question which asks the user what age range they belong to. I need to find out how many rows of data has been added into this column in the database. Code:
I tried the following code to save in a variable, the quantity of entries in my recordset:
if rsEntries.Supports(adApproxPosition) = true then
strCount = rsEntries.RecordCount
end if
It didn't work for me. It's returning a value of -1 and I have close to 100 entries in my recordset. Is there an alternative to this? What code can I use to accomplish that?
I have aproblem to transfer a data from table x to table y based on id. Its mean when 2 table have same id all data table x must move to table y. I don't know which command need to use is it insert into or update?
<%
Dim conn
Dim rs
Dim MYSQL,MYSQL2
Set conn = Server.CreateObject("ADODB.Connection")
Set rs = Server.CreateObject("ADODB.Recordset")
Set cmd = Server.CreateObject("ADODB.Recordset")
conn.ConnectionString = "DSN=prmm;UID=administrator;pwd=sa"
conn.Open
startdate=request("tarikh1")
enddate=request("tarikh2")
MYSQL = "SELECT * FROM table_x where paymentdate between '" & tarikh1 & "' and '" & tarikh2 & "'"
rs.open MYSQL,conn ....
What is the best way to control is a transaction? I've done a little test and both of the examples below seem to do the job, but I was wondering which is the better method, this:
If err.number <> 0 Then
conn.RollbackTrans
Else
conn.CommitTrans
End If
Or this:
If conn.Errors.Count <> 0 Then
conn.RollbackTrans
Else
conn.CommitTrans
End If
how do i count the number of values sent accross the form post seperated by commas ?
e..g 43352352,325324452,235234452,24523454
How do i Count Records with "the same values"?
Name, Age, Sex
John, 20, M
Barry, 24, M
Eve, 19, F
How do i Count the Males and Females?
Like "There is currently 2 M and 1 F registered"
To count them all I would just use rsTable.RecordCount, but dont know how to Count them the way i want them to.
Course_Info and Students. Course_Info holds all the information for each course that a student can sign up for. The Students table holds all of the student’s information. The field that ties the two tables together is Course_Name.
I have an admin page that I would like to display the total number of students enrolled for each class. How can I count the records in the Students table, and then display the total number of students that are enrolled in each individual classes?
I want to add an include line to my main page to veiw how many sites is in my database..
This what I came up with for example:
<!--#INCLUDE FILE="DBCONNECTION.ASP"-->
<%
DIM SQL,RS
SQL = "SELECT COUNT(URL) FROM TABLE1"
SET RS = SERVER.CREATEOBJECT("ADODB.RECORDSET")
RS.OPEN SQL, CONN, 3, 3
%>
How can i show the number only in my main page...
I'm trying to do a multiple count on different tables in my database, but it's not working. At the moment I have this SQL query, Code:
SELECT COUNT(*) AS articlecount, COUNT(*) AS faqcount
FROM article, faq;
This doesn't work though. If there are 2 articles, and 3 FAQs, it will still say 2 FAQs
Can anyone give me the proper SQL query, if possible?
I am trying to get the total no. of students that have signed for each course. I am getting "0" in all the totals for all courses. What could be the problem? Here is my code:
View Replies View Relatedwhat i have to do is count the students in each state so say in Texas i have 12 students so i have to display a map of usa and on it where the state is texas i have to put 12. can someone tell me how i can do it?
View Replies View RelatedI am trying to count all the records that have the dates of 6/21/04 - 6/27/04. I am using:
sql = "SELECT Count(datecreate) AS ct " &_
"FROM Database_Name..TableName WHERE datecreate = '6/21/04' OR datecreate='6/22/04' OR datecreate = '6/23/04' OR datecreate = '6/24/04' OR datecreate = '6/25/04' OR datecreate = '6/26/04' OR datecreate = '6/27/04' GROUP BY LastName "
It only counts the records woth the date 6/21/04. Does anyone know how to fix this or a better way to do this?
I've got query which returns a bunch of dates, like this:
12/05/05
12/05/05
12/05/05
11/05/05
What I want is to find the largest number of same entries and store this number in a variable: so, for the example above, I'd want my variable to equal 3. Code:
I'm trying to count the number of records in a database table but I keep getting the result of -1 which is incorrect. I'm sure this is a simple thing but I'd appreciate any ideas. The code is as follows:
set conn=Server.CreateObject("ADODB.Connection")
conn.Provider="Microsoft.Jet.OLEDB.4.0"
conn.Open (Server.MapPath("..databasesphonebook.mdb"))
set rsCount=Server.CreateObject("ADODB.Recordset")
rsCount.open "RoleCodes", conn, adOpenStatic
response.Write(rsCount.recordcount)
I have created a simple search engine which retrieves records from an access database using sql and displays them using ASP.How do I go about counting the number of records that have been retrieved?
View Replies View RelatedI have been using the following code to count the number of rows returned from a query:
Alldata = rs.Getrows()
NumRows = Ubound(Alldata, 2)
The problem is I am now having to limit the number of rows that it returns:
Alldata = rs.Getrows(300)
Now my NumRows always equals 300 no matter how many matches are found so my counter doesn't work. Does anyone know a way around this?I know that I can use SELECT COUNT(*)..... instead in an SQL query but that means making two trips to the server which I don't really want to do.
I think this should be simple but cannot find it:
I use a update query like
sSQL = "UPDATE PLAATSEN SET PROVINCIE='1' WHERE PROVINCIE='Noord-Brabant'"
ADORSEXECUTE(sSQL)
2 things I want to do, check if query is success and display message with number of changed records. How can I do this?
I have got an access database with 100's of records in it(each record is just one word/phrase)...i am looking to develop some asp code that will select all distinct values in that table and list the number of times that text appears.
For example in the table contains the following records: -
banana
apple
orange
apple
apple
orange
apple
I want the following output: -
apple - 4
orange - 2
banana -1
i have some problem in showing data. I have two tables
First table(containing Hosting categories)
Second table(Containg catagories data lik
url,keyword,description.....etc)
I want to display catgories names from first table and then diffrent catagories
total records from second table, like this
ASP.NETHosting(10)
Linux Hosting(20)
Windows hosting(13)
Any build in function that can calculate number of records in a table?
View Replies View Related