Okay, I have a page that modifies several tables. Whenever I add data to either of two administrator modifiable tables it works just fine. When I add data to the third it does not. I have debugged the code and I am not sure what is wrong.
This is the code including the debug code I added. The unnecessary code has been removed. One interesting part is that one line in the middle of the code does NOT execute, I'll highlight it in red. Code:
I would like to do some modifcation based upon the value on a text field. What I would like to do is have the text turn bold face based upon the value of the text field.
For example if the field contains a value 4 I would like to have the text some where else in the program change into bold type.
I am looking for a ASP Forum which can be easily modified. This Forum also has to have very little "hard-coded" templates and styles, as I am making a ASP Forum for a Browser that supports HTML v3.1 and very little of all that fancy graphical styles out there. So the forums should be quite basic and in plain HTML. So in a way I am only looking for the "ASP Forum Engine".
I have just started using ASP, I am normaly using PHP but I thought ASP might be a good road to go down. I am having a few problems, I am trying to limit the number of records I take out the database but I keep getting errors.
I am testing a new website I built on the actual server. My section for uploading documents seems to be giving me problems. Can someone help me please? This is the error I am getting:
Microsoft JET Database Engine error '80004005'
'c:logindatairb.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
I have a query. When I write out the sql and run it directly in the access db. it works. When running it using ado it doesn't work. I know I have run into this before but don't remember what the solution was.
Works in access but when running it using connection.execute sql
I get the following error:
Microsoft JET Database Engine error '80040e14' Syntax error in INSERT INTO statement. admin.asp, line 345
I've had some problems with an ASP site I've developed. Everything is pretty simple/basic, however, the box it is hosted on is very "neglected" to say the least (old NT 4.0 box, zero services, etc).
Anyway, I have these pages that worked fine until today. The pages are fed from an Access 2000 database. The system administrator's been switching all the DNS records for various boxes lately and was wondering if this could be the culprit giving me this error.
I know this error is often associated with I_USR account privileges, could they have been re-set during this process thus giving me the error? Or could it be something else?
Unable to open registry key 'Temporary (volatile) Jet DSN
I keep getting this error and it is when i have my database open whilst i'm trying to use my site. Is there something you can do that allows you to have your database open and still use your website.
Microsoft OLE DB Provider for ODBC Drivers (0x80004005) [Microsoft][ODBC Microsoft Access Driver] Could not update; currently locked.
This error occurs when I execute the codes below but I don't see any mistake.
while not rs_month.eof cmdDel2.commandtext = "Delete From " & rs_month("table_name2") cmdDel2.execute() cmdINSERT.CommandText = "INSERT INTO " & rs_month("table_name2") & "(BUID, SBUID) SELECT SBU.BUID, SBU.SBUID FROM SBU" cmdINSERT.Execute() rs_month.movenext 'move to the next row wend
I am trying to connect to a database and insert data from a form. The code is correct, to my knowlegde. Now, I have another page that is selecting from the database, this page works fine. The page inserting for some reason I can't firgure out why it is giving me an Operation must use an updateable query. I have read through some of the cause for this and haven't had much luck here's why.
I think it is the permissions but I need someone to walk me throw how to change them. The company has a dedicated server located off the property where the web site is contained. We also have a mirrored server in house that I have access too. Now when I go into the mirrored server and right click on the database I can change the permissions here.
Which I have done and it's still not working. At first I didn't have IUSR set up, I have a couple of Iusr accounts to chose from and don't know which to choose. Plus when I finally did choose one the code still gave me the same error.
this is the error I get. sorry if this is a repeat posting but I been looking and having found anything to answer my question.
Microsoft OLE DB Provider for SQL Servererror '80004005' [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
What I am doing is doing a Select Statement from a Table and using that information to populate another table with an insert statement. The thing is, it insert a couple hundred entry and then it gives me that error message. I could insert a couple hundred a time but that is going to take too long.
Microsoft OLE DB Provider for ODBC Driverserror '80004005'[Microsoft][ODBC Microsoft Access Driver] The Microsoft Jet database engine cannot open the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view its data. /Vestelweb/Tools.asp, line 6
Tools.asp line 6:
Sub OpenAddress (ByRef con) Set con = Server.CreateObject("ADODB.Connection") con.Open "DSN=Address" End Sub
We have completed a clean install of Microsoft Server 2003 on our Web Server and are using frontpage 2002 for our web site. On our asp page (www.dgf.k12.mn.us/contactus.asp) we are getting the following error:
Database Results Error Description: Syntax error in query. Incomplete query clause. Number: -2147217900 (0x80040E14) Source: Microsoft JET Database Engine www.dgf.k12.mn.us/contactus.asp
We cannot find any kind of documentation on this error. Has anyone else seen this kind of error, and know how to fix it?
I am using an ASP page to display the information in a database.The last field in the table does not display properly if there are words in the last field.So,when its blank this code works:
If x.name="Reviewer_Comments" Then Response.Write("Reviewer Comments: "&x.value&"<br>") End If
When there are words in the field it fails to display and on a check it said that x.value was null when there are supposed to be words in it.the field is set as a memo field to accept the text that will be entered.When I set it to a Text field which only accepts 255 characters it worked fine.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xbf8 Thread 0xcd0 DBC 0x8cb565c Jet'.
/suhaib/masjidasp/database/connCommunity.asp, line 5
connCommunity.asp file is
<% Dim objConn, objRS set objCommand=Server.CreateObject("ADODB.Command") Set objConn = Server.CreateObject("ADODB.Connection") objConn.Open "DRIVER={Microsoft Access Driver (*.mdb)};DBQ="& Server.MapPath("databasecommunity.mdb") %> ....
If I try and add a record with a duplicate primary key I get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. Code:
I have uploaded the site and when I browse to I get the following error:
Microsoft JET Database Engine error '80004005'
'C:DBdatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
/inc/connect.asp, line 31 This is my database string
db_str = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=C:wwwuserDBdatabase.mdb;" What are we doing wrong?
Do we need to set up 'ODBC Drivers : Microsoft Access Driver (*.mdb)' in Hsphere? (If so, can anyone point me to a good tutorial please)
I have sucessfully installed IIS 5.1 on XP Pro, and have validated a couple of test .asp pages.
When I try to connect to Access through Front Page, i get the following error:
The Database Results component on this page is unable to display database content. The page must have a filename ending in '.asp', and the web must be hosted on a server that supports Active Server Pages.