Diplaying New Record Count
I got websites...which is its main function is to collect data from all my outlet trough out malaysia....the problem is how can shows the data which been key in a day...
View RepliesI got websites...which is its main function is to collect data from all my outlet trough out malaysia....the problem is how can shows the data which been key in a day...
View RepliesHow to find out recordcount from recordset
I have opened recordset with
set cn = Server.CreateObject("ADODB.Connection")
'Opening the connection
cn.Open "DSN=jms;"
set rs = server.createobject("ADODB.Recordset")
rs.cursortype=adopenstatic
Response.write rs.recordcount
it is giving -1
I want to select the count from a table of a specidfc record. For example I have 10 records. One of the values in the 8th field is "Testnamere".I want do display 8. Testnamere Any suggestions?
View Replies View RelatedOne way to count the record is;
strSQL = "Select COUNT(*) As RecTotal From SCHD_ADS"
TRecords1 = objCOnn.Execute(strSQL)
but what if I want to count the records of a recordset. Well objRS.Recordcount doesn't work in ASP. I don't know why. Any other idea?
I'm trying to do a simple record count from my Access table but when it runs I keep getting a result of -1 when it should be over 50.
<%
set rsKaCon = Server.CreateObject("ADODB.Recordset")
rsKaCon.ActiveConnection = MM_jsb_stk_STRING
rsKaCon.Source = "SELECT * FROM USDSTOCK WHERE Modelcd = 'Fiesta' "
rsKaCon.Open()
rsKaCon_total = rsKaCon.RecordCount
%>
And the result should be Code:
I have a question about looping in a recordset. I'm actually showing some actualities in a page, based on a start and end date. All is working well. My problem is that I put a <hr> between each news, but I don't want a <hr> at the end of the last news. I would like to count how many results I have in my recordset so I would be able not to show the last <hr>.
View Replies View RelatedI got websites. which is its main function is to collect data from all my outlet trough out malaysia. the problem is how can shows the data which been key in a day.
View Replies View RelatedI'm getting this error message: Error Type:
Microsoft JET Database Engine (0x80004005)
You cannot add or change a record because a related record is required in table 'employees'. Code:
I have an insert record form that posts fine to a db which automatically creates an ID how could I get the next page to do a preview using the ID just created by the DB to go to the right record?
View Replies View RelatedI have a .asp page which lists a date, then a bunch of record lines for data that falls within that date, then the next date and it's bunch of data record lines. e.g.
Ship Date: 04/06/04
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Ship Date: 11/07/04
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
What I want is:
Ship Date: 04/06/04
1: Data xxxxxxxxxxxxxxxxxxxxx
2: Data xxxxxxxxxxxxxxxxxxxxx
3: Data xxxxxxxxxxxxxxxxxxxxx
4: Data xxxxxxxxxxxxxxxxxxxxx
Ship Date: 11/07/04
1: Data xxxxxxxxxxxxxxxxxxxxx
2: Data xxxxxxxxxxxxxxxxxxxxx
3: Data xxxxxxxxxxxxxxxxxxxxx
How can I get these numbers printed againsts the records ?
I have a column n_fog defined as text. In this i have numbers or blank value in it.
For example i have 5 records
Record - number
1 - 2
2 - 2
3 - ''
4 - 3
5 - ''
What i want to know is get the total of the numbers. So it should give me 2+2+3 = 7
How can i do it?
I have a link like this
<a href="/mainfolder/one.pdf"> view pdf
what i want to do is find out how many times the pdf was open
so a member logs on the website goes into member section on that page he sees a pdf i want to find out how many times did he click on the link and opened the pdf
i have a field in the table that will store the count value.
For example take below as my array
myArray[0] = Bill
myArray[1] = Ben
myArray[2] = Ben
myArray[3] = Bill
myArray[4] = Ria
myArray[5] = John
myArray[6] = Gemma
myArray[7] = Gemma
myArray[8] = Bill
I want to be able to count the above and produce a list like so
Bill = 3
Ben = 2
Ria = 1
John = 1
Gemma = 2
I have a problem with the below which I can't understand..
SQLcount ="SELECT COUNT(dates) AS total FROM dates"
Con.execute(SQLcount)
Response.Write total
And it doesn't return anything..
When I ask Isnull(total) the answer is "False".
So, if it has a value, why doesn't return it?
What I want to do is count records in a table. if that count result is an
even number do something, if it is an odd number, do something else. sortof
like this.
set row_count = conn.execute("select count(clan_name) as cnt1 from clans")
clan_cnt = row_count.fields.item("cnt1").value
now this is the part i need
if clan_cnt " is odd" then
do something
else
do something else
end if
can someone shed some light on this for me please?
any help would be great, if even steering me in the right direction of some
site. would love to figure this out on my own, but just need a shove.
I'm selecting a wide range of records. Some of these records may have duplicates in one value but some may not. I want to display the records as one and have a seperate display that counts how many there are WHERE the field is equal to a certain value. Code:
View Replies View RelatedI have to do this client side as well as server side
i have a field where a user can enter alpha numberic values
i want to count the integers or numbers seperately
can someone tell me how to do it
for example a user enters a3re4567
so there are 34567
so there are 5 integer or 5 numbers in that field
so i want to pop up an alert on client side.
I m trying to use "select count" in order to retrieve the total number of a value in the database using the code below, but it doesn t seem to work. I get the following error mesage:
Error Type:
ADODB.Recordset (0x800A0CC1)
Item cannot be found in the collection corresponding to the requested name or ordinal.
i checked all the fields in the table, but i dont know if the syntax is wrong.
the code starts here--->
set rsTypes = con.execute("SELECT COUNT (cat) AS Total FROM firstmarch")
i am trying to pull a count from the top 16 records in a db.
select count(top 16 (username)) as cnt2 from bracketdb_"&tourney_id&" where
username <'BYE' order by POS
this is what i need to do, however, it doesn't work. i am getting a systax
error near TOP.this is using SQLdb
I have a Access database with two tables; a category table and an images table.In the Category table I have a field for Index number and a field for Categories. The images table has a field for all the images and a field to specify what category the images are assigned to.
I am trying to write a simple Select query that will return a list of Categories from my Category table, and in the second colum a count of the number of images assigned to each category from my main table of images.
I'm using SQL/VBScript and need to get the number of records found in a DB search. I'm using. where I need it, but in this case, how would I access the info?
Code:
"SELECT COUNT(*) FROM Locations WHERE Location = 'Paris SBDC'"
How do I access the results? I'm really new to SQL and ASP, and the way I usually query a database is
Code:
set rs=objRecordset.Execute(sql)
and plug in
Code:
variable = <%rs.fields("fieldname")%>
I'm having a little trouble trying to fix a little problem of mine. I have an SQL statement which counts all of the records of a certain type. Its fine up to here.
What I want to do is do a Count on a field where the value is > 0 and then do this for several fields in one SQL statement. how I may do it?
how can i create a number that goes up by one everytime its goes throgh a loop. would it be like this:
dim numbercounter
numbercounter = 1
do while numbercount eof
numbercount +1
How do i Count Records with "the same values"?
Name, Age, Sex
John, 20, M
Barry, 24, M
Eve, 19, F
How do i Count the Males and Females?
Like "There is currently 2 M and 1 F registered"
To count them all I would just use rsTable.RecordCount, but dont know how to Count them the way i want them to.
Course_Info and Students. Course_Info holds all the information for each course that a student can sign up for. The Students table holds all of the student’s information. The field that ties the two tables together is Course_Name.
I have an admin page that I would like to display the total number of students enrolled for each class. How can I count the records in the Students table, and then display the total number of students that are enrolled in each individual classes?
Is is possible to accurately count the number of characters in a Word document using ASP?
View Replies View RelatedI am trying to work out how I can count my arrays to compare the number of values.
Code:
ArrID=Split(Request.Form("ID" ),"," )
ArrData=Split(Request.Form("Data" ),"," )
if count(ArrID) = count(ArrData) then
Do Stuff
else
Assign Failure Value
I'm trying to output some data from the db into a table but I'm getting a number of problems with the layout if all the words are together. The table stretches across the screen. I want to be able to output a number of words/characters and then insert a line break and then carry on with the rest of the output.
View Replies View RelatedI got a problem with my printer friendly page. The problem is the total character has overflow the max character per line (no 66 in my print screen) and this affect my page counter no. Is there a way for me to fix it like a function to check the total no of pixel? Code:
View Replies View RelatedI have tried everything possible and still I cant understand why one of the codes work.
This one works, uses a Form to get required info. Code:
I want to add an include line to my main page to veiw how many sites is in my database..
This what I came up with for example:
<!--#INCLUDE FILE="DBCONNECTION.ASP"-->
<%
DIM SQL,RS
SQL = "SELECT COUNT(URL) FROM TABLE1"
SET RS = SERVER.CREATEOBJECT("ADODB.RECORDSET")
RS.OPEN SQL, CONN, 3, 3
%>
How can i show the number only in my main page...
Essentially all I'm trying to do is add numbers together. If there isn't a record then create one with the number 001.
If there is a record add one to the number (Which in most cases will be 001) so the next number should be 002.
My problem is that it gets to 002 and stops. Any ideas why? Code:
I would like to create a count on each page (I am making a global include), and I want to display the number of users on that page. Also, I would like to show the most poular pages. I would like to do this without a database, prefereably using Application objects (or if their not objects...what ever thay are). I know that this may be difficult, but does any one know how I could accomplish this?
View Replies View Related