Displaying Image At A % Of It's Size
The pic in the DB is just a named reference, as all the pics are stored in 2 common folders. 1 for the normal size pics and 1 for the thumbnail equivalents.
As this particular page has to be tight on space, I wanted to set the image as a percentage of it's size so I set the following:
<IMG SRC="thumbs/<%=picname%>' WIDTH="30%" HEIGHT=30%> etc....
Problem I have with this is that the browser seems to set all pics to 1 common percentage size rather than each being say 30% of each individual pic's size. This results in some piccies being completely distorted.
I don't want to go down the route of storing the x and y of each pic in the DB, so could you please let me know if I am doing something really stupid with the above.
View Replies
ADVERTISEMENT
I am creating a dynamic ASP VBScript page, which gets data from an Access database.
In the database, there is a field which holds a URL to an image. I can get the image to display fine, but where there is no file that matches the URL (i.e. a missing image) I want to display an alternative, default image (e.g. one that says "Awaiting Image"). The field is never blank, but the image file may not exist for all records in the database.
I think what I am trying to get to is the following:
If file exists (using URL from database to get location of image file) then
display image using the url from the database as the image source
else
display default image - hardcoded in program
endif
I have had a go and come up with the attached but I get an error with my if statement...
View Replies
View Related
I am having a problem with this code. The problem I am facing is that
the first image is displayed in its original size. But when I click the
next button, the next image not displayed in its original size, but
being displayed as 100 x 100 pixels, same goes to the 3rd picture and so
on. Code:
View Replies
View Related
I only need to know the height and width of the image.
It doesn't seem to be as easy as php's "getimagesize($imgFile);" method.
<%
'Copyright *c* MM, Mike Shaffer
'ALL RIGHTS RESERVED WORLDWIDE
'Permission is granted to use this code
'in your projects, as long as this blah
'copyright notice is included
function GetBytes(flnm, offset, bytes)
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFTemp = objFSO.GetFile(flnm)
lngSize = objFTemp.Size
set objFTemp = nothing
Set objTextStream = objFSO.OpenTextFile(flnm,1)
strBuff = objTextStream.Read(offset - 1)
GetBytes = objTextStream.Read(bytes)
objTextStream.Close
set objTextStream = nothing
set objFSO = nothing
end function
function lngConvert(strTemp)
lngConvert = clng(asc(left(strTemp, 1)) + ((asc(right(strTemp, 1)) * 256)))
end function
function lngConvert2(strTemp)
lngConvert2 = clng(asc(right(strTemp, 1)) + ((asc(left(strTemp, 1)) * 256)))
end function
function gfxSpex(flnm, width, height)
fileT=split(flnm,".")
if fileT(1)="gif" then
Width = lngConvert(GetBytes(flnm, 7, 2))
Height = lngConvert(GetBytes(flnm, 9, 2))
elseif fileT(1)="bmp" then
Width = lngConvert(GetBytes(flnm, 19, 2))
Height = lngConvert(GetBytes(flnm, 23, 2))
elseif fileT(1)="png" then
Width = lngConvert2(GetBytes(flnm, 19, 2))
Height = lngConvert2(GetBytes(flnm, 23, 2))
end if
gfxSpex=true
end function
if gfxSpex("images/urlogo.gif", w, h) = true then
response.write w & " x " & h
end if
%>
Which is a little bit shorter, and seems to work ok so far, but isn't there anything easier, like php's "getimagesize($imgFile);"?
View Replies
View Related
i have a page that displays an image. the image path is a variable passed in the url link. eg. enlarge.asp?picture=http://www.hey/.com/you.jpg
and the window it opens works. but id like to try and get the enlarge as to get the height and width dimentions so i can call a new window to opena popup and ill dynamically have the images dimentions to scale the popup to fit.
and right after the javascript calls a new popup window itll use a close window function. and since it happens before the head tags it should be seamless as if i had a regular link calling a popup.
View Replies
View Related
I have a table full of pictures with urls to images. Any idea how I could find out the dimensions of the images? i want to design tables to show them in a better way.
View Replies
View Related
How can I get the height and width of a jpeg image?
View Replies
View Related
is it possible to have an asp script create a thumbnail of an image upon upload?
i want to create a rather small thumbnail and 65 x 83 and put it in a folder '/sized'
oh yeah, and one more quick thing.. i am pulling information from a database.. why is it that the symbol ' gets changed to a ? when pulling it from the field.. will this go away when i start adding information through forms instead of access?
View Replies
View Related
My ASP app dynamically retrieves from db and sends JPG images using Response.BinaryWrite(). And it seems work. The script sets image type as "Response.ContentType = 'image/JPEG';"
But viewing image properties in IE returns Type and Size as 'Not available'.
How to set these properties properly?
View Replies
View Related
Is there any routine I can call to reduce the size of an image file after
uploading a file from a client. I am looking to reduce file sizes
programmatically using C# in my web page after uploading. I know that
Photoshop can do it but I need to do it dynamically in my web page. I tried
doing it myself with some of the Bitmap thumbnail instructions but the
resulting image is very bad. I need a file reduction routine that creates a
good image that is smaller. I figured if Photoshop can do it then so can I
but how?
View Replies
View Related
How to get the image size with VBScript in ASP?
View Replies
View Related
How to calculate the size of image, using ASP technology. Size means total pixel X pixel and total number of bytes.
View Replies
View Related
I am writing a little script for an online album. The pictures' size varies
a lot. I have a maxim size for every displayed picture because the layout
of the page. So I want to resize the larger one to that size while leave
the smaller one in their original size. Is there any script or code that
can do this automatically?
View Replies
View Related
How can I use ASP to check the size of the images used in my solution?
This is what I need to do:
If the width of an image is more than 256px, I want to set the image width to 256px. Images that is smaller (ex: 100px width) shall not be adjusted.
View Replies
View Related
I have a couple of images that the user can upload, but I want to limit the size to 512kb(most of them will come from a digital cam).
Is there a way to check the file size before the page submits? ie a javascript function that i can call before submitting the page?
View Replies
View Related
I have an photo gallery, I want to create a button that opens a new window fixing the full size image snugley in it, which is easy.
But I want to get a script which detects the image size so i can use the variables to open the window.
What i want to not do is have to more options in the database with height and width in, and have to call them, although i'll do that if i have to, but i thought i would try something new.
View Replies
View Related
how to calculate image size and number of kb used.
View Replies
View Related
Can u tell me how to control image size , its height and width and total size of image like that 13 kb. while uploading the file in asp?
View Replies
View Related
I want to specify the maximum length of an image the file can upload.If the image exceeds that limit it should show me an error.E.g.; 640x480 pixels.
View Replies
View Related
I'm sure I'm missing something completely obvious, but I can't figure out what. I have a path to an image file stored in a database. I'm trying to align the image to the right, but nothing seems to be working:
Response.Write("<img src='" & rs("faculty_link_to_photo") &"'>")
dispays the photo without any wrapping, but when I try the following, the images go all over the page:
Response.Write("<img align=""right"" src='" & rs("faculty_link_to_photo") &"'>")
Can someone tell me what I'm doing wrong?
View Replies
View Related
I have ASP (classic) code that writes out a table and sets the <img....> tag
with a virtual directory source, e.g. src='/test/imghold/xyz.png', and the
images do not appear on the IE page. The code is from a production site
that works fine.
We just duplicated the web site to one named test and now
the images do not display. The IMG item is in a TD element of a table.
Also, I looked at the "view source" of the page and it shows the <IMG
src='/test/imghold/xyz.png'...> just fine. I even tried it with different
images and none of them show up.
View Replies
View Related
It is not displaying the image thepicture. It is in the directory. I also have a similar bits of code for a other pictures with of and they is working The response write displays the correct reference.
The alt displays instead of the image as though the image has not been found and as I said the Code:
View Replies
View Related
I have to display tif images using .asp page. I have tried to read the image
as a binary file and stream it to the browser. The relevant code is as
follows. Unfortunately, the display on the browser is a lot of gobledygook.
How can I ensure that the image displays correctly in the browser? Code:
View Replies
View Related
I dont know if this is the right place to ask this but I have a database which contains shop details, each of which can have several images associated with it. In the database I am just storing the image paths, the actual images are held on a remote server.
I am able to grab the pathnames from the database and then use the following code to loop through the recordset displaying the associated image(s).
While NOT rs.EOF
Response.Write("<img src=""servernameImages" & rs.Fields(0) & """ width=""150"" height=""150"">")
rs.MoveNext
My question is, in the event of one of the images not being found, it just displays a red cross, is there any way of testing to see if the image exists before I try and display it?
View Replies
View Related
I have designed asp pages where all pages have common header and footer. I have added Images to the footer page called as footer.asp.
now i have the footer.asp in another folder
and i call that footer.asp within my index.asp page as a include page.
but the images in the footer.asp are not displaying in the index.asp.
what could be the problem?
View Replies
View Related
I wish to display an image from a folder based on the name held in a field in a database.
<%
If len(rssal("picture"))>0 then
Response.Write ("<img src=""/ProductImages/rssal("ProductCode").gif"">")
ELSE
Response.Write ("<img src=""images/sorry.gif"">")
END IF
%>
View Replies
View Related
An application is logging faxes sent in SQL2000 image column type. I have
found code on the net but what it is doing is prompting to save to local
which is fine for single page image. Not good for multiple page faxes. I
have not been able to locate an example to load in the browser or how to
handle multiple image in the one column. Code:
View Replies
View Related
The code sends an automatic email, but the email is html format. At the top of the email i want to include an image.
Everything is working except the image is not being included, instead a box with a X appears.
Here is the code that i am currently using
Dim htmlMess ' THIS STORES THE HTML CODE
PHP Code:
View Replies
View Related
I have a website that we display images we have saved into a SQL Server 2000 database as binary BLOB. This is on a Windows 2003 Server. Just recently (a week ago) this website began to save the images it is displaying on the website as ASP pages in the Temporary Internet Files > IE.Content > Folder.
We have other websites where we use the exact same code and these do not save files on the server when they are displayed.
Here is the code to display the image:
Set rs = objConn.Execute( SQL )
Response.ContentType = "application/octet-stream"
Response.BinaryWrite rs("Product_Image")
SQL is the SQL String to get the image from database
When I add this code:
Response.ContentType = "image/jpeg"
The images still display on the website, but now are saved in the Temporary Internet Files folder as JPG's.
View Replies
View Related
I'm using Windows 2000 server n IIS I'm Using FileSystemObject of ASP in Server Every File and Folder has 2 Size when we get properties of any 1 actual size and Size on Disk.now my problem is when i get the file size from ASP object it give Size value but when i try to get folder size it gives size on disk and both values are different.
I'm creating a size to access limited size to upload files so i just check the folder size and then get size for those which are going to update by user then i will less those size to actual folder size to get remaining size.
View Replies
View Related
I have a client who has had a ASP site with an Access database for several years. It stores information for the used cars on his lot. I have stored text in the database that points to the location of the image for each record. Each record will have a thumb image that is supposed to display in a list of vehicles available then the user can select an item from this list and a new page displays with the information and the regular size image. So far everything has worked fine exept for the display of the images which are stored in a separate directory called veh-photos. All I get are image place holders. I am using Dreamweaver 2004 and and Access 2000 for the database.
Following is the code to list vehicles: ....
View Replies
View Related
1.I want to show a image file of type '.tif' in the browser window; for that I'm writting as ASP code page.
2.This '.tif' type image can be shown better with 'Kodak Image Control'.
3.To have this 'Kodak Image Control' on my code page I just add it's ..ocx to tool box and then drag it from 'Toolbox' to the page.
4.Now after dropping this control to the code it's type is getting changed to 'object' instead of type 'ImgEdit'(and I think this is the
reason I don't get correct result).
5.On one button's 'Onclick' event I'm calling a javascript function with which I'm setting a 'Path'and'Display' property of a control.
6.And want to show a image at location -- '..MFTDRCMF919685173-62.tif' which get shown in new browser window but could not get shown in that particular control. That means the path is correct, then what is the problem?
For better understanding of problem I'm pasting a following code which I've tried up till now......
..................................................
<%@ Language=VBScript %>
<% OPTION EXPLICIT %>
<HTML>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft Visual Studio 6.0">
<SCRIPT LANGUAGE=javascript>
<!--
function showpic()
{
var path;
path = document.frmtif.path.value;
alert(path);
document.frmtif.ImgEdit1.Image =path;
document.frmtif.ImgEdit1.Display;
window.parent.self.open(path);
}
//-->
</script>
</HEAD>
<BODY bgColor=#ffe4e1>
<form name="frmtif">
The Image
<P>
<OBJECT id=ImgEdit1 style="WIDTH: 409px; HEIGHT: 218px" type="ImgEdit"
align=left
border=1 classid=clsid:6D940280-9F11-11CE-83FD-02608C3EC08A
name=imgtif></OBJECT>
<input type="hidden" name="path"
value="..MFTDRCMF919685173-62.tif">
<input type="button" name="show" value="Show" onclick="showpic();">
</P>
</form>
</BODY>
</HTML>
..................................................
View Replies
View Related
I can convert an image that is retrieved from a FileUpload object into a byte array and insert it into the database..
When the user signs-up i wish tosimply insert into the Picture (DB Type = Image) field to an image i already have saved in my images folder?
Anyone know of a way to do this? Tutorials, articles or advise??!
View Replies
View Related