I would like to append to a file, AS WELL AS, send an email via
ASP....I have some sample code from ASP101.com and am planning on
modifying it to my uses but I don't know where exactly I should place
it....Should I begin a whole new set of ASP commands or should I
incorporate it into the current ASP that specifies an email being
sent?
EMAIL BEING SENT ....
i'm trying to printout normal text from IE using Generic Text Driver
like so:
B10,10,0,1,1,1,100,N,"13123123"
problem is in the printout itself (if i use the print to file to debug)
IE keeps appending char 20 charachter to each line which screws up my
printing (trying to printout to a barcode printer)
I want to write ASP code to send email with file attachment
by using CDONTS . I searched from internet but i'm still confused
about the mechanism and code they writing in ASP.NET
Anyone doing this before can give me a hand such as instruction or sample code for example.
I am using ASP 3.0 for sending emails through my website. It is correctly working and I also successfully attached server reside files via email attachment. I wish to send files from client's computer. Such as if I used input type "file" then I can get the file name with its path at client side but how can I tell the script to deal this path as client side path??? As I have used Server.MapPath but as it is work-full for server reside files. If user’s input file name is "c:documentmyfile.txt" then how can I work with it as my script will treat it as web server hard drive path.
My script can attach files but I do not know how can understand client side path.
See the ASP code below in order to send an email. How can I attach
a file to this email please?
set objMailer = Server.CreateObject("CDONTS.Newmail")
objMailer.From = "anySender@123.com"
objMailer.To = "anyRecipient@456.com"
objMailer.Subject = "a Subject"
objMailer.Body = “I need to know ASP�
on error resume next
objMailer.Send
if err then
response.Write err.Description
else
'do nothing it went okay
end if
I am using Server.CreateObject("Scripting.FileSystemObject") to create a CSV file.
'create file
Set fs=Server.CreateObject("Scripting.FileSystemObject")
if fs.FileExists(server.MapPath("/temp/data.csv")) then
set myfile = fs.GetFile(server.MapPath("/temp/data.csv"))
myfile.delete
set myfile = nothing
end if
The CSV file is then attached to an email and sent.
Code:....
I'm trying to get a file attached to an email from a form.
The form is a simple name, email, attach cv. When the user hits submit it gets sent to the company. I simply used the <input type="file"> for the user to browse.
I have the setup working close to what I am after. The upload script I am using has been supplied by 'Lewis Moten'.
Basically what I am after is.
A job application contact form. that includes a input="file" element allowing the user to send a CV, to the address related to that job.
So far locally I have the file uploading, the file sent, and then the file deleted all working fine. Althoug this may well work locally I feel I will have problems when I come to trying this live. Mainly due to timings.
Surely the script would need to know when the file has been uploaded completely, also when the file has been sent completely before delete....
i want to send an email from a web app with an attached file. the form is for users to enter email addresses to whom they want the attached file sent. I'm using ASP and CDONTS mail. Code:
View Replies View RelatedMy company needs an online form that user's can enter information into and once submitted, will dump the user-supplied info into a csv file and email it to the person who heads up the project. Initially, I thought they wanted the form to save the data to a database, and after playing all weekend, I was able to do that. Today I learned that they prefer the emailing a csv file method instead. Any links to tutorials on this subject or sample code with explanation would be greatly appreciated!
View Replies View RelatedIm running a simple mail system program which emails newsletters to a database list of 3000+ users.
The program loops through a database containing the emails and sends them out using ASPEmail.
My question is, is there some way i can validate each email address so that if there are invalid characters e.g. the space in "blah @blah.com"
it will skip the record and continue the loop.
At the moment i have a working program however, whenever the program comes across an invalid email address it stops at that record and prevents the program from emailing any further.
I am having a problem formatting an email message which comes from a form.
I am currently having difficulty with the <br> tag which I am using for line spaces within my email. I am getting an expected statement error message which is pointing to the line which is underlined below. I can't think what is causing this.
The code for my processing page is below:-
1. I want users to type in their email address on a textfield, and after users press the "Submit" button. The info will automatically go to another person's email to receive a compliment, suggestion, etcetera.
2. Another is how to include the message written on a textarea of a form with the ASP code supplied below: Code:
how to write to check verification valid email thru nslookup or mx record or dns record. Is it possible to do that. Is there any tutorial from sitepoint, previously found it but i lost the link.
example to check assume test@domain.com is not a real email, abc@domain.com is real email
how do u check it.
i used the following script but it won't send the email. any suggestions why?
<%
Dim TBdy
Dim MyCDO
CR = Chr(13)
Set MyCDO = Server.CreateObject("CDONTS.NewMail")
MyCDO.From = "person@something.org"
MyCDO.To = "allstar@aol.com"
MyCDO.Subject = "collegebound info"
TBdy = Request.Form("cb_name")
MyCDO.Body = TBdy
MyCDO.Importance = 1 (Normal)
MyCDO.Send
Set MyCDO = nothing
%>
Just starting to play with scripts, and need a little guidance. I want to check to make sure that the email addresses users enter in a form are identical before it will allow them to submit. here's what i have:
the variable for the second email address is EmailFrom2
'validation
Dim validationOK
validationOK=true
If (Trim(EmailFrom)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("emailerror.htm?" & EmailFrom)
If (Trim(Name)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("nameerror.htm?")
If (Trim(CityState)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("citystateerror.htm?")
If (Trim(SchoolName)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("schoolnameerror.htm?")
here is the script i use:
Set myMail=server.CreateObject("CDO.Message")
myMail.Subject="subject"
myMail.From="me"
myMail.To=request.form("email")
myMail.TextBody="hello"
myMail.Send
set myMail=nothing
this script sends emails to some addresses but not others--and its based on the email service it's sending to. for instance, hotmail email addresses get the email, but mail.com email addresses dont get the email. i have tried sending it to other email hosts, too, and still, some work, some don't. what is going on here?
I am using CDONTS component to send email in ASP.
The code is some thing like this:
Dim Mail
Set Mail = Server.CreateObject("CDONTS.Newmail")
mail.From = "abc@hotmail.com"
mail.to = "xyz@hotmail.com"
mail.subject = "Test Email Subject"
mail.body = "This is Email body message"
mail.send
Now the question is that this code will use the Default Virtual SMTP Server in IIS, but I want to use my ISP's SMTP server. please tell me how to do this. I have used my ISP's email server in Outlook express and it is working fine. Please do not suggest to use "CDO" or "CDOSYS" to use for sending emails because I must have to use "CDONTS".
has anyone got a function or subroutine which will remove blank out or remove email addresses.
i've wrote a function which will remove valid email addresses, it's pseudo addresses such as "blah @ blah.com" or "blah_at_blah_dot_com" or "blah_at_blah_._com"
the function is basically to stop users posting an email address in a message.
i'm converting an image file to hexa..then the hexa is saved to a text file..
can any one help me how to read the content text of a text file?...
im doing it this way because i don't want to save hexa in my database, because it makes the database slower to open up.
is there a way, using asp, to find out the width and height of an image file?
View Replies View RelatedI have code that loops through a directory reading files..
now the problem is that files are constantly being uploaded and I only want the file system object to read those that are finished being uploaded.
How can I check the properties of the file to see if it's in middle of being written before i read the file?
i am having a problem in how to create a Open File dialog to enable user to select a image file that will be stored into database. i just want the file path to be stored in database, not the image.
View Replies View RelatedIt works if the file in on the server side, how to use the component (DSOleFile) with the file on the client side? Also how can I calculate the width of the file. (Page set up - Landscape or porrait). Code:
View Replies View RelatedI need to do online streaming multimedia file on my web portal, just like those online portal that selling MP3. User need to click on the preview link to stream the audio file to listen before they decide to buy the file or not. How do i link my audio file in my web server to allow it to be stream? Totally lost on this function,
View Replies View RelatedThis question has to do with MS file search but it is happening only with
..asp pages, so I though someone programming with .asp pages has experienced
the same situation.
I'm trying to find .asp pages with a certain table name (i.e.
"renewalInfo" )
When I ran the search I get no results. I know that I have that string in a
couple of pages. My file system search engine is working fine with other
file types, like Word documents, Excel spreadsheets, etc.
I tried typing the string outside the <% %> tags and when I do the search I
get the file results, so it seems like if the search engine in my file
system was not searching inside the <%%> tags. Code:
I'm having a problem with the fact that I want to allow image files to be uploaded to a remote web server, as the hosting package the web site is on is IIS6 and has a default file upload size limit of 200kb. As it's a shared hosting package, the default limit cannot be changed for me unfortunately.
Anyway - i need to check the size of the file being uploaded, so i can notify the user and prevent them getting the default Microsoft error message page. The problem is that I can't implement a server side size check which works, using either Request.TotalBytes or load.getFileSize (with "load" being an object of my loader class). It seems that I can't carry out any of these operations when the file size is too large.
I'm trying to run the server.execute command inside a executed file. It doesn't work. Can anybody tell me why? I've searched all around and haven't found a reason. Could it be because it's not supose to work, or is the syntax diferent then in the first file?
It's something like this:
File 1
...
<%Server.Execute("File2.asp")%>
...
File 2
...
<%Server.Execute("file3.asp")%>
...
File 3
<HTML>
<body>
Hello!
</body>
</HTML>
Is this possible?
I am using the File System Object to create server side cookies and part of
the Function that I am writing deletes a file but I am getting a permissions
denied error on that line of code.
I am using Integrated security only on this site but how do I get the
IUSER_Machinename account to work with Integrated Security?
I have an asp page written entirely in jscript with a vbscript used as an include file which one variable on the page must access.
When the page runs, I run into jscript complilation errors when it tries to access the include file (since it is written in vbscript), and I can't figure out how to get the two to work together. How do you get both scripting languages to work on the same page?
if i got a file path as a variable say for Example:
c:folder1folder2folder3folder4file.txt (The Path could be any long)
how do i just store the Path of the file name and the file name seperately. like :
File Path=c:folder1folder2folder3folder4
File Name=file.txt
I would like to add a facility to my web page which allows users to upload basic files (word, excel, text, gif, jpg etc) to the server.
I know there's a facility to do this using HMTL forms, but I don't know how to handle the file on the server side.
What I think I need is an ASP file running some code to manipulate the filesystemobject, allowing me to receive the file and store it in the filesystem on the server. It would be nice to access some of the file properties too (name, type etc).
I've seen a few custom components online which allow you to do this, but I can't depend on installing them. I need to be able to script it myself.
I have a page on our intranet that is supposed to stream an Excel sheet to
the user. I'm using pretty standard code: