I'm getting the following error with GoDaddy.com, but customer support tells me I have the correct SMTP address. They can't help me until I've proven the error is on their side.
I've used this code on other hosts, and it works just fine.
The actual error message is: ...
Can someone help me configure my cdosys to work with my godaddy account, i can get it to work my my work mail server but i haven't had any luck with go daddy's.
View Replies View RelatedI have an application that references a database on my hard drive, however I am unsure how to transfer the files to the server and keep the integrity of the database reference string.
The Current DB is located on C:
[CODE]
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:database.mdb;Persist Security Info=False"
CODE]
If you have any suggestions on where to place my database in my hosting account and the reference code for it.
anyone have experience with this? godaddy says aspupload is already installed. I am verrrry new to website work and am trying to make http://peppgum.com/peppphotos.htm upload a file to the /images folder so they can be read by the simpleviewer flash dealio.
I put the http://www.aspupload.com/manual_simple.html HTML code i found there into the page, and got the box, browse.submit. then i copied the yellow box code for asp script1.asp into notepad and saved as .asp
i frontpage ftpd them to godaddy but not working? i need to limit it to .jpg files as simpleviewer only works with .jpgs, how can i do this? and rename the files once uploaded starting at 1-infinity?
I have an email form on a GoDaddy hosting site. I know that the form data is getting to the ASP file, because my custom error/sent messages work. But, the email never gets to the email address. Right now I have it set so that you can choose where the email goes. I have also tried it with the email address hard coded in there, to no avail. Code:
View Replies View RelatedI am using GoDaddy.com's hosting service. I am not sure if the problem is my code or their server. I use the following code as my connection to the Access Database: Code:
View Replies View RelatedI've got a UAPortal (asp freeware intranet) on a godaddy hosting package that comes with a free mysql database. I can't connect the asp site to the godaddy sql server.
They give me the connection strings, but don't tell me where or how to use them! Support does no good, they tell me that is programming, get an expert.
UAPortal comes with an Access database, so when installed it works fine, but its only Access. I want to use the mysql database which is faster, larger and more useful. I opened the Common.asp file and added the info from the connection strings, but now I get an error message:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[MySQL][ODBC 3.51 Driver]Access denied for user: 'jwyss@winhostecn82.prod.mesa1.secureserver.net' (Using password: NO)
/Common.asp, line 34
Does anyone know how to do this?
I am not getting the url in email that I want to receive after a user completes a job application form. The url is in bold and red. Is there something wrong in my code ?
To clarify here is my code:
Does anyone know how to fix this error when sending an email through ASP
Cannot modify or delete an object that was added using the COM+ Admin SDK
Does anyone know how to solve the prob?
I would like to know if it's possible to have the browser email me everytime a end user encounters an error on my page. i would also like that email to include the error message.
View Replies View RelatedI am trying to figure out how to send email with asp. I have the smtp stuff installed and configured it for localhost. My code is as follows. I get an unspecified errorr that points to the line which sends the email. That line is marked in bold. Code:
View Replies View RelatedIs it possible to redirect the server to another ASP page if the requested page throws an error? I want to redirect the user to a custom error page and then send the webmaster an email that contains the error message.
View Replies View RelatedI have this Regex email validation that I believe I got from Elija ... one of the one's he's posted over the past ...
I keep getting this error when using it:
Quote:
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'isValidEmail'
/users/mehere/contact.asp, line 39
here's the regex
Code:
i have a script that allows user to register and then it is supposed to send an email for them to complete registration, the process of registration works ( the data can be seen in the database ) but it errors on submit when it tries to send an email out
Microsoft VBScript runtime error '800a01ad'
ActiveX component can't create object: 'CDONTS.NewMail'
/members/inc/mailobject.asp, line 16
I can go into the database and change the confirmed field to yes and that allows the user to log in but they cant get the email or login with this error pending - Code:
I am using formmail.asp from www.brainjar.com on a webfusion server. I get this on submit: Form could not be processed due to the following errors:
Email send failed: The message could not be sent to the SMTP server. The transport error code was 0x80040217. The server response was not available .
have beens searching web for hours and webfusion support is v slow! I have double checked the username/password and mail server variables.
I have a mail script but don't know how to catch any errors so that it will display email address that failed to send. Here is my code...
Dim mail
Set mail = Server.CreateObject("CDO.Message")
mail.From = "from@mail.com"
mail.Bcc = "bcc@mail.com, bcc2@mail.com"
mail.To = "to@mail.com"
mail.Subject = "This is the subject of the email"
mail.HTMLBody = "I am the message that will be displayed in the body"
mail.Send()
Set mail = Nothing
How can I display a message that says that there's an error with sending the mail?
I am trying to validate the email in a form and then insert them into a database. I try the validation and it works, however when I try to populate a database with the emails it works the first time, after that it gives me the HTTP 500.100 Error. Here is my code:
View Replies View RelatedI am currently having an issue with CDO and my asp code. The email body is including an "!" and space when the body is greater the 600 characters. Does CDO have a limit on the length of the email body. The issue is occuring both in .textbody and .htmlbody formats. Has anyone seen this before? Where do I need to look in order to determine the cause?
View Replies View Relatedmy code:
dim msconn
DIM mail, objMail
Set objMail = Server.CreateObject("CDONTS.NewMail")
objMail.From = "admin@abc.com"
objMail.Subject = "This is a test"
objMail.To = "webmaster@xyz.com"
objMail.Body = "this is a test email from abc.com"
objMail.Send
Set objMail = nothing
This code works perfectly well from any machine apart from the domain controller. On the domain controller, i get the following access denied error message:
Microsoft VBScript runtime error '800a0046'
Permission denied
/Emailer.asp, line 310
I have given full permission to the drop folder in the mail root as guided in other sites. It's still not working.
Can anyone tell me where i'm going wrong? anything else i can try?
My email application was working a couple of weeks ago, then all of a sudden I get
Error Type:
(0x8009000F)
Object already exists.
I checked the permissions on the machinekeys directory
like the KB article said it still doesn't work. Does
have any ideas? Code:
I tried the coding but it keeps returning an error message:
****************************
Error Type: Microsoft VBScript runtime (0x800A0046)
Permission denied
/JWarner/ForgotEmail.asp, line 33
****************************
Line 33 is the Mail.Send. Here is my code:
<%
if Request.Form("submit") <> "" then
if UsersRS.eof and UsersRS.bof then
response.redirect "EmailFail.asp"
else
Dim objmail, mailbody
set objmail=Server.CreateObject("CDONTS.NewMail")
objmail.From="jwarner53@xxxxxx.com"
objmail.To=Request.Form("Email")
objmail.Subject="Username and Password Request"
mailbody="Username and password: " & vbcrlf
mailbody=mailbody & "Username - " & UsersRS("UserName") & vbcrlf
mailbody=mailbody & "Password - " & UsersRS("Password") & vbcrlf
objmail.Body=mailbody
objmail.Send
set objmail=Nothing
response.redirect "EmailSuccess.asp"
end if
end if
%>
Can someone please tell me what's wrong?
Im running a simple mail system program which emails newsletters to a database list of 3000+ users.
The program loops through a database containing the emails and sends them out using ASPEmail.
My question is, is there some way i can validate each email address so that if there are invalid characters e.g. the space in "blah @blah.com"
it will skip the record and continue the loop.
At the moment i have a working program however, whenever the program comes across an invalid email address it stops at that record and prevents the program from emailing any further.
I am having a problem formatting an email message which comes from a form.
I am currently having difficulty with the <br> tag which I am using for line spaces within my email. I am getting an expected statement error message which is pointing to the line which is underlined below. I can't think what is causing this.
The code for my processing page is below:-
1. I want users to type in their email address on a textfield, and after users press the "Submit" button. The info will automatically go to another person's email to receive a compliment, suggestion, etcetera.
2. Another is how to include the message written on a textarea of a form with the ASP code supplied below: Code:
how to write to check verification valid email thru nslookup or mx record or dns record. Is it possible to do that. Is there any tutorial from sitepoint, previously found it but i lost the link.
example to check assume test@domain.com is not a real email, abc@domain.com is real email
how do u check it.
i used the following script but it won't send the email. any suggestions why?
<%
Dim TBdy
Dim MyCDO
CR = Chr(13)
Set MyCDO = Server.CreateObject("CDONTS.NewMail")
MyCDO.From = "person@something.org"
MyCDO.To = "allstar@aol.com"
MyCDO.Subject = "collegebound info"
TBdy = Request.Form("cb_name")
MyCDO.Body = TBdy
MyCDO.Importance = 1 (Normal)
MyCDO.Send
Set MyCDO = nothing
%>
Just starting to play with scripts, and need a little guidance. I want to check to make sure that the email addresses users enter in a form are identical before it will allow them to submit. here's what i have:
the variable for the second email address is EmailFrom2
'validation
Dim validationOK
validationOK=true
If (Trim(EmailFrom)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("emailerror.htm?" & EmailFrom)
If (Trim(Name)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("nameerror.htm?")
If (Trim(CityState)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("citystateerror.htm?")
If (Trim(SchoolName)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("schoolnameerror.htm?")
here is the script i use:
Set myMail=server.CreateObject("CDO.Message")
myMail.Subject="subject"
myMail.From="me"
myMail.To=request.form("email")
myMail.TextBody="hello"
myMail.Send
set myMail=nothing
this script sends emails to some addresses but not others--and its based on the email service it's sending to. for instance, hotmail email addresses get the email, but mail.com email addresses dont get the email. i have tried sending it to other email hosts, too, and still, some work, some don't. what is going on here?
I am using CDONTS component to send email in ASP.
The code is some thing like this:
Dim Mail
Set Mail = Server.CreateObject("CDONTS.Newmail")
mail.From = "abc@hotmail.com"
mail.to = "xyz@hotmail.com"
mail.subject = "Test Email Subject"
mail.body = "This is Email body message"
mail.send
Now the question is that this code will use the Default Virtual SMTP Server in IIS, but I want to use my ISP's SMTP server. please tell me how to do this. I have used my ISP's email server in Outlook express and it is working fine. Please do not suggest to use "CDO" or "CDOSYS" to use for sending emails because I must have to use "CDONTS".
I got an error saying
Microsoft VBScript runtime error- Error '800a000d'
Type mismatch
/briansforums/default.asp, line 923
also another error called Code:
# Error Type:
Server object, ASP 0177 (0x800401F3)
Invalid ProgID. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.
/CoxAxis/adminEditPage.asp, line 6
My code:
<%
dim self, pid, i, c
self = Request.ServerVariables("URL")
pid = Request.Querystring("pid")
set Session("pageContent") = Server.CreateObject("Scripting.Dictionary")
Set custObj = Server.CreateObject("NFIFunctions.ValidateField") Line 6
set psi = Session("pageContent")
set errDict = Server.CreateObject("Scripting.Dictionary")
i = 1
i'm getting
Provider error '80004005' Unspecified error
admin/dbconnection.inc, line 4
what this is, it only started happening after i did a recent upload of my database!, i 've tryed uploading it again but the error still appears.
has anyone got a function or subroutine which will remove blank out or remove email addresses.
i've wrote a function which will remove valid email addresses, it's pseudo addresses such as "blah @ blah.com" or "blah_at_blah_dot_com" or "blah_at_blah_._com"
the function is basically to stop users posting an email address in a message.