I have this insert statement where instruction field in the DB is a memo field.
SQL="INSERT INTO int ([instruction]) VALUES " & _
"('"&Request.Form("myTextarea")&"')"
objConn.Execute(SQL)
Its giving me error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
I am trying to peform a multiple deletion of records from a single table "Stockist"
I i keep getting the following Error and can't see where i am going wrong. Can anyone help?
Microsoft OLE DB Provider for ODBC Driverserror '80040e10'
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
/RetailerStockProductRemove.asp, line 22
The code i have used is as follows:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
this small bit of SQL:
SQL_EditNews = "INSERT INTO tblNews (newsBody) VALUES ('" & editedNews & "') WHERE newsID=63"
Is there something wrong with this statement? When i try to execute it, i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Missing semicolon ( ; ) at end of SQL statement.
/edit_news_03.asp, line 19
I am urgently finding a set of codes to write data into a form and the data will go to my database. However i have tried a lot of form but couldn't successfully process. Below is one of my problem...
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x9a8 Thread 0xa08 DBC 0x3041e1c Jet'.
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
I keep getting this error message when im adding a new record to my database.
Here is my code: ....
i m trying to coneect to a access database Using DSN , but when i try to connect i get an error
Microsoft OLE DB Provider for ODBC Drivers error '8007000e'
[Microsoft][ODBC Microsoft Access Driver] System resource exceeded.
When I try it on original server, it works, but when I moved everything to a different server it does not work. I have checked the dsn name, userid and passs. But no luck.
Error
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Code:
We hosted our asp based application under windows 2000 server with sql server 2000 as backend. All the asp module works fine with internet explorer version 5 but same application is giving odbc error when we run the application in IE 6.
The exact error is :
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified xxxxxxxx/login.asp, line 27
My text file, dsn file, and asp page are all in the same directory on the web server.My problem is that I want the text file to be on drive U: (which is each users drive)When I do this I get the following error (even if I copy the dsn file to the U: drive):-
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Text Driver] '(unknown)' is not a valid path.Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
I'm getting the following error on one of the servers I maintain:code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[MySQL][MyODBC 5.00.11][MySQL] 2006 MySQL server has gone away
Always occurs when the MySQL server it connects to restarts, which is hosted on another box. Nothing but an IIS restart fixes it.Is there anything I can do to get ASP to automatically pick-up the connection, or force a reconnect? I'm not an ASP coder, so a little hand-holding would be nice (don't worry, I won't kiss you).
I am getting this error after uploading an asp search page and attempting to search an MS ACCESS database.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x7d0 Thread 0x340 DBC 0x2870cd9c Jet'.
I've researched the error code online,and it seems to be server-side,but a lot of the server talk is pretty much Greek to me.
I have designed my database so that u cannot insert duplicate keys. So when this happens, I get the following error:Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Violation of PRIMARY KEY constraint 'pk_QuoteItem'. Cannot insert duplicate key in object 'QuoteItem'.
How do I catch this error and print a more user friendly error message?
My asp run smoothly before. But, now, I found the ASP page is not smoothly recently.
Sometime if the ASP is requested to connect to Access, the page will prompt
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open
registry key 'Temporary (volatile) Jet DSN for process 0xdd8 Thread 0xae0
DBC 0x3a85074 Jet'.
What's going on?
I need help figuring out this Microsoft OLE DB Provider for ODBC Drivers error '80004005' error.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
register.asp, line 115
I created a simple registration form. It works for me but when i uploaded to a remote server...it doesn't work any more. The host said he made a System DSN connection to the registration.mdb database. Code:
I keep getting this error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e10'
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
This error occurs at line 51, I have checked the line:
rsGlobalWeb.Open SqlJunk, dbGlobalWeb, 3, 3
There are 2 parameters already. So, I do not understand why the error keeps stating that I have too few parameters, and they expect 2, which I already have.
I am using an ASP script on my site that reads a microsoft excel file and adds the values to the database (MS SQL Server). The script works completely fine on my LOCAL server, but it shows me the following error when I upload it to the server and try to run it.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Excel Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1128 Thread 0x2268 DBC 0xd2d0fec Excel'.
/Bacardi/bblcontest/readexcel.asp, line 5
FYI, I am using the following connection string:
I am trying to display data from three tables in an MS Access database. Here is my code:
View Replies View RelatedFor some reason, my asp pages that establish connections with the Access Database are very erratic. It often gives me an
this error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x7c0 Thread 0x70c DBC 0x21f6024 Jet'.
It throws me the error at times, but sometimes it works fine, and I'm sure the physical path of the database is correct as well. What is going on?! Is there a problem with the IIS? I use IIS 5.0 with W2K by the way.
I'm having a few problems trying to access my database and would appreciate some guidance!
The error I get is:
Quote: Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Unknown
/includes/connection_open.asp, line 22
I'm currently coding on a Windows XP SP2.
My connection_open.asp code is as follows:
Code:
I am using Windows XP Pro with IIS 5.0 after installing service pack 2.0 I am unable to run my site on my PC and getting the following error message. I have setup all the permissions. Anybody there who can suggest me some salution for the same.
Error Message:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x7f8 Thread 0xf7c DBC 0x782f2c Jet'.
I am using the following code to connect to my database
<%
set con = Server.CreateObject("ADODB.Connection")
con.open "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("/database/stotra.mdb")
set rr = Server.CreateObject("ADODB.Recordset")
rr.CursorLocation=3
rr.CursorType=3
%>
I can't figure out what's wrong with this script. I have been working on it for a bit, and played around with it, and the problem doesn't seem to go away. This is the error that I am recieving when I view the page.
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression.
/cforums/bugscript/move_post.asp, line 22
Also here is the script for this page: ....
What does this mean? I am accessing an ASP page that queries Access Database
thru fileDSN. I'm using IIS 5.0 Win2K SP4
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open
registry key 'Temporary (volatile) Jet DSN for process 0x444 Thread 0xfe4
DBC 0x5200024 Jet'.
(FileName), (LineNumber)
Here is the tail end of my code :
sql = sql + " INNER JOIN Type ON Type.ID = Property.TypeID WHERE ExpiredDate > #" & Date() & "#"
And here is the resulting error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '#'.
/css_practice/resreport.asp, line 40
Can somebody help me solve this error.What does the error mean?
"select count(BUID) from SBU where BUID= '"& buid &"' and SBU='none';"
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression.
Here is my asp code with my SQL statement.When I run it I keep getting this error and can't figure out why.
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in CREATE TABLE statement.
set rsaddwg = server.CreateObject("adodb.recordset")
dwgno = request.form("dwgno")
strSQL = "create table '"&dwgno&"'"
strSQL = strSQL & "(dwg_no integer not null, "
strSQL = strSQL & "rev_no autoincrement primary key,"
strSQL = strSQL & "title text,"
strSQL = strSQL & "cr_date date,"
strSQL = strSQL & "dr_by text)"
rsAddwg.open strSQL, adocon
set rsAddwg = nothing
set adocon = nothing
I have this line:Code:
SQLstmt = "SELECT * FROM users Where Email=" & request.form("email")
and i'm getting this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression 'Email='gargamel@intermail.co.il'.
/users/newuser.asp, line 11
if there is some syntax error in Code:
set objRS=Server.CreateObject("ADODB.Recordset")
objRS.Open "select * from Pictures",objConn,,,adcmdTable
I am getting this error....
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
/geclscurrent/pst/getCategory.asp, line 14
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Not a valid password.
This is an error I got after reinstalling windows and server IIS. I looked
all over the Internet but could not find out how to resolve this. Until I
fell upon a message that said check the permissions. I checked all the
permissions on the server and directories. The only thing I didn't try is
giving everyone full rights to the database its self. And viola the problem
was solved. I thought it was fair to share this information with the ASP
community.
I'm making a lost password recovery system. The user has to insert his e-mail address, the data is being sent to the validation page, where user's details are extracted from the DB according to the inserted e-mail and being mailed to this address. For some reason I keep getting this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'user_email=her@herdomain.com'.
/sendpass.asp, line 71
Here's another error: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14). Incorrect syntax near 'Customers'.
Set ObjConn = Server.CreateObject("ADODB.Connection")
strConnection = "DSN=Northwind; Database=Northwind;"
strConnection = strConnection & "UID=; PWD=;"
ObjConn.Open strConnection
Set ObjRS = Server.CreateObject("ADODB.Recordset")
Set ObjRS.ActiveConnection = ObjConn
strQ = "SELECT Customers.CompanyName, "
strQ = strQ & "COUNT(Orders.OrderID) AS NumOrders"
strQ = strQ & "FROM Customers INNER JOIN Orders ON"
strQ = strQ & "Customers.CustomerID = Orders.CustomerID"
strQ = strQ & "GROUP BY CompanyName"
strQ = strQ & "HAVING (COUNT(Orders.OrderID) > 7)"
strQ = strQ & "ORDER BY COUNT(Orders.OrderID)"
ObjRS.Open strQ
I am learning form a book and have the sample code and I am getting the error:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005) [Microsoft][ODBC Microsoft Access Driver]
General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xd94 Thread 0xff8 DBC 0x12e5fe4 Jet'. /asp21/testing/execute_sql.asp, line 20. Code and DB attached.
I'm having a very difficult time with an ASP page that I develpoped in Dreamweaver and the MS Access DB it's supposed to update. When I submit the data the following error appears:
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/sessiondata2.asp, line 115
I know this is usually a reserved word issue but I don't think that's the case here because the page updates perfectly when executed on my computer as a testing server.
The rest of the site updates data into the database properly so I know the connection string is working. I can't figure out what would throw an error on a live server when there isn't one on a testing server. Code: