I want to capture err.description into asp variable when any error occurs in the pages as a whole. Suppose some error occurs at the top of the page say ADO Block.
Can it will travel till page end, or can every error necessarily stop the proceedings and throw error resulting page crash. My ultimate aim is to capture error in asp variable when ever crashable error occurs. How to capture it. Code:
My asp pages will not update rigth away on my Win2k3 server with IIS 6. I have found disabling lazy content propagation but it has not worked? Has anyone else had this problem?
How do i do error handling using asp. Like taking an example i am getting this error on trying to save a record twice whihc has a primary key constraint:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.
how can i handle such cases and where do i place the code???
I want to error handling in ASP. But i think that ASP is not enough for error handling. I have got two chance. 1. I can prapare an error page and control throught IIS. 2. I can use on error resume next. For 1. This is a general handling. I want to handle local error. Maybe i do special thing when error occured. For 2. I have to write alot of lines code. I have to control every line.
Is there a possiblity that, when an error comes in asp page in server, especially with sql script, to hide that error from user and display just Error, report to admin,
i just want to make a general case where when an error comes i should take the page to report to admin.
how i can handle errors on ASP page. Actually i want to maintain a ErrorLog in Database and want to redirect the user on an Error.asp page where i can show him the error details(i-e error #,Description etc).
I have found "With Endwith" method to handle errors but the problem is that i can only write it with a record set and it will handle only record set related errors and also i have to write With EndWith with each recordSet but i want to handle any error on page at a single place.
I have a script that takes gathered customer data, sends it to the gateway (ecommerce site), then takes the response from the gateway and redirects or prints out any errors (invalid CC number, declined etc.). Code:
actually i am doing php and know how to handle 404 error page not found errors but one of my client needs it in ASP and i am not that much faimliar with ASP. so i need some help if some body could give me code to handle these broken links .
actually it has to be done like this that if user clicks some where on the site and that page does not exist so the programme should take him/her to a page where message will show e.g 'this page doesn't exist'.
I have a page where user can enter data, which will be saved in the database. I want to handle the closing of window, by clicking on the 'X' of IE. The user should be Displayed a message asking him if he wants to save the data. If yes then submit the same page to save the data and then close the page, else close the page.
I tried to use the 'OnBeforeUnload' event but not able to submit the page while closing. if this can be done. Please send me links useful in this context.
Supressing the "Save password" prompt: Are there any good approaches to keeping a password from being stored client-side if auto-fill is on? Ideally I'd like to supress the prompt. The only other option I can find is to use a timestamp as part of the form name and pass it (the name as well as the value) in a hidden field to the login script.
Unique concurrent logins: Are there any good ways to prevent userX from being logged in from 3 different locations simultaneously? -I can code for a 'logged in / out" field, but that relies on the user actually login out. And if I use a variation of the "who's online" approach the user may have to wait until the seeion expires befor logging in again (suppose thier net connection dropped for a moment and they need to get back online) - At least I think this assumption is correct.
I have some javascript code which executes once the page is loaded. But When user refreshes the pages this javascript is executing again resulting in additional data. I want to prevent this reexecution of data. I tried doing this javascript in many ways But I filed miserabley.
I tried using Session variables also but they are not working properly.
I am am using WDDX.Deserializer.1 to parse some XML data to display on an ASP page. Occasionally, I get an error like this:
Microsoft VBScript runtime error '800a01fb' An exception occurred: 'deserialize' /includes/sidebar.asp, line 25
Line 25 is:
set MyRs = MyDeser.deserialize(content)
I would like to set up some error handling so that if this error occurs it will display a custom error message rather than this one. Right now this message occurs near the top of each page on the site, in effect crashing the whole site. How can I test this to see if an error will occur?
I inserted an error handling code for the code bellow. What happen is the page is taking a long time to load. Upon loading it takes me to "page not found" of microsoft internet explorer. How do I solve the problem? Code:
When a user tries to visit a non-existant page in our web site they receive a custom 404 error message. I want to capture the URL the user tried to visit. Does anyone know where I can find this string?
I have an error handling routine that emails me the Err.Source, Err.Nbr, and Err.Description in the event of an error. How can I include the line number of the error as well and the filename?
Is there an elegant way to check for the REFERENTIAL INTEGRITY VIOLATION in Access via ASP. The reason I ask is that if the user attempts to refresh the screen after implementing an INSERT he will be trying to insert an identical record which thows up the following error (below).
I could place On error resume next before but I find this dangerous or am I overworrying. I could preface the insert by doing a check for the record but this creates longer code which warps my anti-debugging frame of mind :) - is there a better way? Code:
i am coding in VBScript. i am coding for an online survey. Fr error handling (eg if the user forgets to fill out a field), is it possible to ensure all fields have been filled out BEFORE clicking the submit button? i wish for the user to be notified via a MESSAGE BOX, how would i go about this(using VBScript)?
I currently use this for my error handling in XML HTTP... Code:
On Error Resume Next If NOT xmlHttp.readyState = 4 then:xmlHttp.waitForResponse = 5:End if If err.number then response.redirect("error.asp?error=2&pg=" & Current_page_URL) else If xmlHttp.Status <> 200 OR NOT xmlHttp.readyState = 4 then response.redirect("error.asp?error=2&pg=" & Current_page_URL) Else
'content here (no error)
end if
But when the site I am gathering data from is down, then I get an error saying that It cannot connect to the server. How can I error handle this error?
when I try to insert a duplicate record I get the primary key error. which is good. but I want to generate a user friendly error ... telling the user that u have got this error because u r trying to insert a duplicate record. i can simply do so by using "on error resume next"....
this is what I do:
"on error resume next server.transfer("error.asp")"
the problem is it simply takes me to a page where I display an error has occurred... it doesn't look attractive to display a one line error in a big page? I hope I am clear....
1. how can I display the error message in my error.asp
2. I can I make it look better... how is error handling done ???
Subscript out of range: '[number: 0]' or Subscript out of range: '[number: 1]' or Subscript out of range: '[number: 2]'
This is correct in that the variable is empty if user does not fill in correctly. However how do i stop it falling over and just get it to error handle?
e.g. If Subscript out of range: '[number: 2]' empty how do I 'know' this without an error? Code:
If I try and add a record with a duplicate primary key I get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. Code:
I am having trouble, with Error Handling.. I have a ICMP ping utility in VBScript, it works fine if there is a proper reply but will create an error if the IP or DNS name is unknown, Can someone look through the code and see if theres a way I can catch the Error and display say "REQUEST TIMED OUT" Code:
i'm trying to incorporate error handling into my application, but i've run into a dilemma.
i've already performed 10 successful INSERTS, but on the 11th INSERT, the application fails for some reason (say for example, i tried to perform an INSERT into a table that doesn't exist). logically, i should stop execution and display some sort of error message. but, i've already ran a bunch of INSERTS so what do i do?
I am calling some stored procedures from ASP. These strored procedures have to deal with lots of deletes and updates. So i have thought of implementing transaction commits and rollbacks. But if a rollback occurs in these stored procedures, i want to get a value back to asp page, based on this value i will run the next stored procedure.
i'm trying to incorporate some error handling into my web app, but i'm not sure how to go about it in this case.
say for example, i already ran 10 INSERTS, then on my 11th INSERT, something fails (perhaps trying to perform an INSERT into a table that doesn't exist). logically, i should stop execution of the page and display some sort of error message. but, since i've already run 10 successful INSERT queries before the error occurred, what do i do now?
I am gathering the input values to a form using Request.form method from the processing page. After all the data is captured, I am building sql statement out of it.
Using a response.write statement, I am generating the output of the sql statement which I can ran against the table to insert the row.
However, when I am trying to programmatically use the sql statement for the insert, I am having the following error:
Error Type: ADODB.Field (0x800A0BCD) Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record. How to do the error hanndling, if certain record cannot be found in the database? If possible, please show the coding.