Error :: Syntax Error (missing Operator) In Query Expression

I am working on a project using an access db. Here is the problem.

Error
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'unit=6400s'
Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.

Code:
sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr

tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().

View Replies


ADVERTISEMENT

Syntax Error (missing Operator) In Query Expression

1) I'm getting this error: Syntax error (missing operator) in query
expression on the below statement. Can I get some advice.

2) I searched ASPFAQ and came up blank. Where can find the "rules" for when
and how to use single quotes and double quotes in ASP? Code:

View Replies View Related

Syntax Error (missing Operator) In Query Expression

I'm getting this error:

Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60

when running this code: .....

View Replies View Related

Syntax Error (missing Operator) In Query Expression?

I'm getting this error:

Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60

when running this code: ....

View Replies View Related

Syntax Error (missing Operator) In Query Expression

Any ideas why im getting this error from these lines of code?

" WHERE [Personnel].p_id = [specialists].[p_id] " & _
" AND*[specialists].spu_id = " & Cint(Request.form("spec"))

View Replies View Related

Syntax Error (missing Operator) Query Expression

valuA = (request.form("toadd"))
If valuA = "" then
SQL = "UPDATE CourseReg SET attended='Active' WHERE ID
IN("&request.form("toadd")&")"
Set RS = MyConn.Execute(SQL)

End If
MyConn.Close
Set RS = Nothing
Set MyConn = Nothing
the error
syntax error (missing operator) query expression ID IN ()

View Replies View Related

Syntax Error (missing Operator) In Query Expression 'ID='.

First time poster here but I've spent a while lurking and reading the great threads here
I've got a problem that I've wrapped my head around for a few days and I can't seem to figure it out.

Im using ASP with Access 2000 DB. I want to perform a simple lookup by ID (AutoNumber in Access) and it says I am missing an operator. Code:

View Replies View Related

Syntax Error (missing Operator) In Query Expression '''undefined'''.

I am trying to insert values into a database using an sql statement that i read from a table that contains all my different sql commands. The sql statement is stored in the following way in the table: Code:

View Replies View Related

(0x80040E14) Syntax Error (missing Operator) In Query Expression Single Quotes

I am recieving the Microsoft JET Database Engine (0x80040E14) Syntax error (missing operator) in query expression when updating data that contains single quote marks, for example: Code:

View Replies View Related

Trying To Pass Form Data Gets Me: Syntax Error (missing Operator) In Query Expression

I'm trying to pass a piece of data i get from a query using a different form's passed values. This is how I get the data into the new form and how I try to pass it to the next asp page query.

<td valign=TOP width="168"><form action="HouseDetail.asp" method="post" name="MLS" id="MLS"><input name="MLS" type="hidden" value='<%=oRs("ML_Number")%>'><input name="Submit2" type="submit" value="Get Details"/></form></td>

The value='<%=oRS(ML_Number")%>' generates a real value like '2403943' - and the field I'm trying to use this value in the qry is expecting a number. But even passing the number without the single ' at both ends generates the same error message. Code:

View Replies View Related

SQL Error (0x80040E14) Syntax Error Missing Operator

This is the sql statement:

sqlquery="SELECT * FROM tblrequest WHERE Req_id= " & Req_id & " "
set rs=con.execute (sqlquery)

Req_id is coming from a form like so:

Req_id=request.form("Req_id")

The error is:

Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Req_id='.

On the first line of the query.

See anything wrong that would cause this error?

Please help, the Req_id is being sent from previous form via a hidden value hope i'm requesting this properly.

View Replies View Related

(missing Operator) In Query Expression

i have a drop down list that populates a table based on the user input. The table than has some products, I'm trying to have the product name link to another page with full details about the product. I'm close but just need some help with the sql. The sql is:
"Select * FROM tablename WHERE ID =" & request.Form("ID")

ID is defined as autonum in the database, the error message i'm getting is:

Syntax error (missing operator) in query expression 'ID ='.

View Replies View Related

Page 2 - Syntax Error In Query Expression

to search based on the beginning characters the sql should be

sql="SELECT * FROM Employee Where Emp_Id Like '" & strId & "%'"

View Replies View Related

Syntax Error In String In Query Expression

I'm working on a page so that a user can change their password. I thought might be a simple update of a database, but everytime I do it I get the following error message. I've put x's where my ID would be showing for security purposes. Code:

View Replies View Related

Erro Message - Syntax Error (comma) In Query Expression...

I am trying to execute the following SQL Statement:

SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT (Team, Played, Wins, Loses, Draws, For, Against, Points) from HomeWins WHERE postponed=''"

But i am getting the following error message:

Syntax error (comma) in query expression '(Team, Played, Wins, Loses, Draws, For, Against, Points)'.

And i dont know why. All of the fields are numerical apart from TEAM is that helps.

All i want to do is Insert data from one table into another but i cant use SELECT * because one table has one extra field to the other and when i tried to amend the SQL to look like this:

SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT * from HomeWins WHERE postponed=''"

i get this error:

Number of query values and destination fields are not the same

View Replies View Related

Missing Opererator In Query Expression

i keep getting this error in this script on this line in display-course.asp

sql= "Select * from course_data WHERE Course_Id="&course_id &" ORDER BY Course_Date_From"

course.asp

Code:

View Replies View Related

Error :: Oracle Error '80040e14' ORA-00917: Missing Comma

I had developed a messageboard in asp which allows users to post new messages,reply to existing messages.I am using textarea (Html tag) for a messagebox in my asp page .When the user enters any characters in messagebox except a single quote ('),the message gets inserted in oracle database without any problem.But if message contains single quotes (') , while inserting in a database it gives the following error

"Microsoft OLE DB Provider for Oracle error '80040e14' ORA-00917: missing comma ".

Is there any solution to insert messages containing single quotes in a database?

View Replies View Related

Missing Operator

iam trying to insert some data into a database but i keep getting the above error msg this is the line that is causing the problems any ideas?

Code:

sql3 = "Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES ("&courseid&", "&course&", "&title&", "&weekno&", "&status&")"

here is what is printed when I response.write the sql3 statement

Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES (285, NEBOSH, test, Week One, TBA)

View Replies View Related

Problem With SQL Statement - Missing Operator

my SQL keeps coming back with the following error

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Clients.Area_ID = 3 AND Clients.Category_ID = 7 OR WHERE Clients.Category_ID = 7 AND Clients.All_Areas = true'.

I am trying to pull out all records where area and category match, aswell as all records where category match and all_areas = true

Any suggestions as to where I am going wrong?

Code:

View Replies View Related

Microsoft VBScript Compilation Error '800a03ea' Syntax Error

I am trying to display data from three tables in an MS Access database. Here is my code:

View Replies View Related

Error '80040e14' Syntax Error In INSERT INTO Statement

I'm having a very difficult time with an ASP page that I develpoped in Dreamweaver and the MS Access DB it's supposed to update. When I submit the data the following error appears:

Microsoft JET Database Engine error '80040e14'

Syntax error in INSERT INTO statement.

/sessiondata2.asp, line 115

I know this is usually a reserved word issue but I don't think that's the case here because the page updates perfectly when executed on my computer as a testing server.

The rest of the site updates data into the database properly so I know the connection string is working. I can't figure out what would throw an error on a live server when there isn't one on a testing server. Code:

View Replies View Related

ERROR (0x80004005) UPDATING ERROR Operation Must Use An Updateable Query.

Error Type:

Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/changeprofile.asp, line 44

Code:

View Replies View Related

Error: Syntax Error In FROM Clause

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
----------------------------------------------------------------------------------

Yes, I know this question has been answered a million times, however, I've already searched through this forum and my problem still hasn't been resolved.

Basically, I keep getting the error above whenever I try to execute this code. This code is from a search page entitled search.asp.

Here's my code:

View Replies View Related

Error :: Syntax Error From Clause

What does this error means? 'Syntax Error From Clause'.

View Replies View Related

Error :: [Microsoft][ODBC Microsoft Access Driver] Syntax Error In INSERT INTO Statement

I have this insert statement where instruction field in the DB is a memo field.

SQL="INSERT INTO int ([instruction]) VALUES " & _
"('"&Request.Form("myTextarea")&"')"

objConn.Execute(SQL)


Its giving me error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.

View Replies View Related

ASP Error Event Information Is Missing The File Name

I am using Windows 2003/IIS 6. The following event occurs during the day. i
want to debug the culprit ASP page which is causing this, but having hard
time without knowing on what page and website where the error occurs.
May anyone have any idea:

1)how to change the server configuration so it will log the page, or
2) is the error log stored elsewhere (i checked
onWINDOWSsystem32LogFilesHTTPERR, but it logs different sort of errors),
or
3)is there another way to log only errors (we have an internal error
monitoring system, but this error seems to escape it. maybe it's on
global.asa)? Code:

View Replies View Related

Query With AND/OR Operator

I have 6 textboxes where if I fill them up I want the query to search if either one of them has results found. I have this but it's not working: Code:

View Replies View Related

Error : Data Type Mismatch In Criteria Expression

What's wrong with the following code?

Set objRS = server.createobject("ADODB.Recordset")
strSQL ="SELECT Content FROM thread WHERE ThreadID='"& strQuoteID &"'"

objRS.Open strSQL,objConnection,3,3

I get this error:
Data type mismatch in criteria expression

View Replies View Related

Syntax Error

I'm using an Access database file for this. I can issue SELECT statements on the database, but for some reason it says I have a syntax error with my UPDATE statement.
Code:

openAccessRS("UPDATE students SET password='test' WHERE sid='123456789' AND email='google@yahoo.com'")

Don't worry about the openAccessRS function. It just takes the query and issues the ADO.RecordSet.Open function. I have the students table filled with the correct information. I do have an entry where the student id (sid) is 123456789 and email = google@yahoo.com.This query worked fine in a MySQL DB.

View Replies View Related

Syntax Error

Microsoft JET Database Engineerror '80040e07'Syntax error in date in query expression 'fldUserName= 'muratsa' AND fldTimeIn=#01.09.2003 16:52:20# AND fldOffline=0'. /Vestelweb/logout.asp, line 7

I am using the Now() function to get the date
in db the format is general date and in regional settings of the server the seperator is "."

View Replies View Related

SQL Syntax Error

Could anyone tell me what is wrong with this SQL statement:

sqlInsertShow = "INSERT INTO tblShowings (date) VALUES (#12/12/2004#)"

Im trying to inder this into an MS Access database, and the field name DATE, is set to date/time value.The error message I get is:

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
/fyp/backend/add_show_03.asp, line 41

Ive been scratching my head over this for AGES now! It just will not work.

View Replies View Related

Syntax Error

What does the error mean???

Dim rs_sbu
Dim rs_sbu_numRows
Set rs_sbu = Server.CreateObject("ADODB.Recordset")
rs_sbu.ActiveConnection = MM_dsprms_STRING
rs_sbu.Source = "select count(BUID) from SBU where BUID=" & buid & " and SBU='none';"
rs_sbu.CursorType = 0
rs_sbu.CursorLocation = 2
rs_sbu.LockType = 1
rs_sbu.Open()
rs_sbu_numRows = 0

Error Type:
ADODB.Recordset (0x800A0BB9)
Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

View Replies View Related

Syntax Error

I am trying to update an Access database using an ASP form with a date. All
I return is a custom error telling me there is a syntax error with the field

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved