I need help on this error that occured on one of the pages. fuunny thing that its happen in localhost and not in the web server. below is the code and the highlight of where error occured.The error mentioned in the page is :
Microsoft JET Database Engine (0x80004005)
Operation must use an updateable query.
/shop/confirmation21.asp, line 245 . can anyone kind enuff to let me know whats it about?
Code:
I am getting this error when trying to run an Update query, Microsoft OLE DB Provider for ODBC Drivers error '80040e14' Can anyone explain to me what this means and where I'm going wrong.
View Replies View RelatedI am doing a bmw tracking project for school using asp and access2000.
on my search.asp page, I can search for a particular bmw and order it if
i want. It works fine when i do select query to get data. But when I try
to order a bmw(using update query), it gives me this message error:
Error Type:
Microsoft JET Database Engine (0x80004005)
Operation must use an updateable query.
/bmw/search.asp, line 257
I have gone in to set IIS permission status to both read/write and
change everything that seemed obvious. but i still get this same error
message.
what changes do i have to make this query work in an SQL query? This is the access query:
UPDATE tblLocation SET tblLocation.fldLocationDesc = "DU" & Right([tblLocation]![fldLocationDesc],Len([tblLocation]![fldLocationDesc])-2)
WHERE (((tblLocation.fldLocationDesc) Like "EI*"));
what i have is a location that has a lenght of 5 like EI001 and I want to change the EI to DU.
How do I update a record if I want to loop through the records then update the current record in the loop. Flow :
rs.EXECUTE("Select * from Tbl Order By Ord;")
'update current recors in loop record
rs.movenext
loop .
wat are the different ways i could execute this update query. Code:
sql="Update Employee Set name='"& name&"', age="& age &" location='"& loc &"'
Conn.Execute sql
the sql statement shows evrythings correct. but when i execute the update query...it shows syntax error in UPDATE statment.
I'm using odbc and Classic ASP and I want to read the sql content of a query in an access database. ANyone have any clues?
View Replies View RelatedI am currently working on a small website which gives an up to date current count on how many people are available are certain time slots for different areas, this is run of a Microsoft Access Database Backend.
My index script will display all areas and times and then display a link to a form which deducts 1 from the current count. Code:
I have the following query:
Update properties set Last_Change=#8-Mar-2006# Where properties.fdref='h3c000';
which works fine when I run it on my desktop under MS Access, but when I run it as an ASP page, I get the following error message:
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
I am using the same database bot online and offline so field names etc are exactly the same.
I want to change the existing code of our company e-commerce site so that the pull down menues are now checkboxes (will make life easier for sales to work with).
The pull down menu's must automatically submit, as the pricing changes with each selection.
Is there a way of auto submiting when a checkbox is ticked / unticked? Have tried using the "onChange=" that I nicked from the pull down... Code:
I have developed this script that is meant to take in a value from a database record add one to it and post the new number in the record. It works ok but it always seems to read all database records as 0 never as thier true number (i have tried it set to 1,2,3 etc)
Code:
I keep getting an error when I try to run this update statment: [CODE]
INSERT INTO MYPosts ( IEname, country, server_name, LANIPAddy, license_ver, wrkstn1, wrkstn2, wrkstn3, wrkstn4, wrkstn5, notes, status, rdse, esc, eso, parent, , timezone, ) VALUES ( '" & lcIEname & "', '" & lcCountry & "', '" & lcServerName & "', '" & lcLicenseVer & "', '" & lcwrkstn1 & "', '" & lcwrkstn2 & "', '" & lcwrkstn3 & "', '" & lcwrkstn4 & "', '" & lcwrkstn5 & "', '" & lcNotes & "', " & lcStatus & ", " & lnRDSE & ", " & lcESC & ", " & lcESO & ", " & lcParent & ", " & lcTimeZone & ")"
I get the following error:
Microsoft JET Database Engine error '80040e14'
Syntax error (missing operator) in query expression
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/changeprofile.asp, line 44
Code:
I am working on a project using an access db. Here is the problem.
Error
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'unit=6400s'
Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code:
sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
SQL gives an error but why?
SQL="UPDATE tblLog SET fldOffline=1 WHERE fldTimeIn='" & session("time") & "' AND fldUserName='" & session("admin") & "'"
and db is:
fldID=AutoNumber
fldUserName=Text
fldTimeIn=ShortDate(Date/Time)
fldSID=Number
fldOffline=Yes/No
Error:
Microsoft OLE DB Provider for ODBC Driverserror '80040e07'[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression.
Page 1 displays a list of items. Click an item and move to page 2 where
full details of that item are displayed.
Page 1 works fine, but page 2 always displays the following error:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object
is read-only.
I can't see anything wrong in the code I haven't used before successfully.
Microsoft OLE DB Provider for ODBC Driverserror '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'dfgfgWHERE RequestID = 9'.
/saveSolution.asp, line 202
my codes:
Here is a clip from my script.
updatestr = "UPDATE users SET password='temp' WHERE email='test@test.edu';"
set RS = Con.Execute(updatestr)
this is the Error I get:
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/changepassword2.asp, line 35
This is line 35:
set RS = Con.Execute(updatestr)
strQuery2 = "Update tbCard_Temp Set tbCard_Temp.Id='tbCardSwipe.Id
From tbCardSwipe'"
and i get this message
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'tbCardSwipe.Id From tbCardSwipe'.
I am trying to run a simple update statement through asp and for the life of me can't figure out why it isn't working. I was wondering if anyone could look at this and tell me what may be wrong: Code:
View Replies View RelatedI try to do an INSERT statement throught my ASP to add records to my Access DB. However I get an error when I execute this. The code in ASP is -
strSQL = "INSERT INTO tbl_psm (LocID, Week, Month, Year, Rating, Remark, Action, SubmittedDateTime) VALUES ('" &cint(intLocid)& "', '" &cint(sWeek)& "', '" &cint(sMonth)& "', '" &cint(sYear)& "', '" &cint(sRating)& "', '" &sRemark& "', '" &sAction& "', '" &formatdatetime(date,vbshortdate)& "');"
objConn.Execute strSQL
I get the error page Code:
I am submitting a comment box from a form into a database field that I have declared as text (16). When I type in a small amount of information, it submits just fine, but when I enter a substantial amount of data then I receive an error. I've tried different field types, but I keep getting the same error.
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 's'.
I have an inline VBScript script to update a MS Access Database, unfortunately I get this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
First of all, the code is flawless. I've been checking the last 6 hours. I checked security issues in MS Access and set to full read and write privileges. I then accessed IIS to make certain that full read write privileges were set.
I also went through windows explorer and made sure that read only was unchecked. I even attempted to create a virtual directory with the anonymous user IUSR_machine. All to no avail.Lastly, I went through ODBS sources and added my mdb file as a System Database.
The following error is appearing
Microsoft JET Database Engineerror '80040e14'
Syntax error in UPDATE statement.
/TestUpdate4.asp, line 111
with the following page. Been told has something to do with Field Names?????
I'm having trouble with an SQL UPDATE string updating Microsoft Access 2000 with jet engine using ASP classic. I can't see what could be going wrong, as far as I can tell it's fine. I have tried surrounding my field names with brackets [] to no avail.
The error I receive is: Code:
i'm trying to update a row in my Access Database by the AD_ID... i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.
/alterantique1.asp, line 35
Here is the code:
SQL = "UPDATE * FROM IME_request SET instructName = '" &InstructName& "', email = '" &email& "', school = '"&school&"', courseNumber='"&courseNumber&"', dateMonth = '"&dateMonth&"', dateYear = '"&dateYear&"', dateDay = '"&dateDay&"', description = '"&description&"', instructDesign = '"&instructDesign&"', techranger = '"& techranger & "', IP= '"&IP&"', completed = '"&completed&"', feedback = '"&feedback&"' WHERE courseNumber='" &courseNumber&"' "
I have a form that I want to update my database. I am receiving an error that reads:
Syntax error in UPDATE statement.
I'm trying to update my counter in DB (Access) using sql query but the following error appears
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/cms/modules/test.asp, line 14
How could i solve this problem, here is sql query that i'm trying to run
sql = "UPDATE articles SET counter=counter+1 where (((aid) ="&aid&"))" .
Okay so i have an access db that holds simple news and simple custom areas, very easy. I made an admin page that could access it and update fields and stuff. In the past, It has always worked fine.
It updates fine and everything. However my old hosting package expired so I switched to a new company with more space and they said they supported access db's. so i said cool and uploaded my sites(haven't changed the code since I used my old hosting company) and whenever I try to update something it says: Code:
What am I doing wrong with my Update statement in with
javascript? Code:
I am trying to modify and update a column in the access dB by using a form on the first page, and then the update sql statement on the second page.
For some reason the error its throwing at me is this
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/willdata/password.asp, line 34
When I use the same update statement directly into the access dB it works, if I even hard code in values in the ASP page I still get an error - I now cannot see for looking: Code:
i have a table 'Accounts' in my database, which contains a bunch of
users. From the main menu i choose "edit user" and all users in the db
are presented in a table. The first column 'Pnr' is a unique ID for
each user that i made appear as a link. clicking on one userID should
present a form where the picked users userdata is already filled in so
i can easily edit it and then move on to submit the form to update the
db. i get to the part where all users are listed nicely in a table,
but clicking on one, i get this error:
Error Type:
ADODB.Recordset (0x800A0CC1)
Item cannot be found in the collection corresponding to the requested
name or ordinal.
/VS_Files/updateUserForm.asp, line 19
I think i'm doing something wrong with passing a value with the
querystring...? Code:
I am trying to add a record to a database. I keep on getting the error message:
Error Type:
Microsoft JET Database Engine (0x80040E09)
Cannot update. Database or object is read-only.
/client_add_db.asp, line 31
Line 31 is rst.AddNew
I have checked the attributes in the folder - it is not set to read only. For some reason the folder that the DB is in will not let me make the folder NOT read only - I have even tried the attrib command as recommended by ms in the cmd but that will still not change the dir to not be read-only although that did make the db not read-only.