I'm trying to figure out how I can evaluate if a given time/date has passed. I'm pulling a time/date field from my database in the format "9/1/2007 3:18:04 PM", and want to compare it against <%=NOW%> then set a variable if the time/date I pull has already passed.
Is there a way to use the datediff in the negative or something like that? I'm really not sure how I could accomplish this.
I need to do a check to see if a time is past midnight but I'm having some problems doing the check. It's probable some something small. Code:
View Replies View RelatedOk I know this is simple but I cannot get it to work.
on the URL I have:
.../default.asp?strCode=xxx
I then have:
If Request.QueryString("strCode") = "xxx" Then
Response.Write "code is XXX"
End If
So for some reason it is not evaluating the queryString and does not enter into the conditional. Why?
I have a date field in my form called "bookdate". I've successfully put validation on the field so the user can only enter a valid date. Code:
If IsDate(bookdate) = False Then
errordate = "yes"
errFlag = True
end if
However, what I want now is code that will stop a user entering a date if it occurs in the past, problem is I don't know how to write it.
what is the most efficient way of finding the following with asp.
1) disovering what day of the week was the first of the current month. (eg. this month 1 December fell on a Wednesday) From there I would like to get the same for the following month and the following month after that and so on.
2) a way of finding the last day (numerically) of the current month and the next month after that and so on. (eg. this month it's 31, next month its 31 then it's 28 and so on.)
I need to select through a query, every record with the date that is from the past 30 days from now. Any hint?
View Replies View RelatedI have a noticeboard that the user inputs items into. One of those is the date of an event. Once that event has passed I want it to disappear from the page.
So I need to do a comparison with current date to the date in the "datestarted" field. My table is called "notices." Using Access and ASP VBscript.
I would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.
I have a website that I subscribe to that allows me to track tasks. I have an extra computer with a big monitor that i want to always display the task list. the problem is after so many hours I get logged out.
I need to need to reload that sign in url every few hours Code:
there i was just windering how do i compare a date/time vlaue in sql server agaisnt the computers' date/time.
for example, if computer date/time is two months or 2 weeks before the database date/time do something
Currently working on a ASP for a friend, which requires the date and
time on it. It pulls in entries from an Access Database with dates and
times in the format of:
"Fri Oct 17 18:02:46 2003"
However my date and time on the ASP page is displayed as:
"Friday, October 17, 2003 18:02:46"
using the script:
"<%Session.LCID = 1033%>
<%=FormatDateTime(Date(), vbLongDate)%>
<%Session.LCID = 2057%>
<%=time()%>"
Anyone know how to change this script, fully or partly to produce the
date and time on the format that's in the access database i.e. "Fri Oct 17
18:02:46 2003" Code:
I am working on a database that collects information about incidents. One of the fields that people enter is the time of the incident. I am trying to convert that string that people enter into a OdbcType.Time and I am at a lost.
View Replies View RelatedHow will we convert the system date & time to other timezone for eg: Eastern Time zone using ASP?
View Replies View RelatedWhen the Form is submitted I use the Date() and Time() functions to put the date and time into the Body part of the e-mail. The time reported is three hours earlier than the time at which the Form is actually submitted.
I understand these functions are evaluated on the server so the server must be in a time zone three hours earlier than where I am . Is there any way I can get the local time at the location where the user is actually located. ?
Any some tools or sample codes drop down asp script execute time and
database connection time ?
I'm trying to do a very simple code that converts the server time into a time zone of your choice.
<%
dim h 'Current Hour
dim i ' Time Zone Increase - add or subtract hours
dim r 'Result Here
h = Hour(Now)
i = + 2
r = h + i
%>
but obvisouly i'm having trouble with the time zone convert.
I am trying to compare the NOW time with a "deadline" time. Please help. Just not sure why this is not working. I need to be able to say IF IT'S BEFORE 9:30 TODAY, IT'S OKAY TO ADD SOMETHING. IF IT'S AFTER 9:30 TODAY, YOU MUST ADD IT TOMORROW.
CODE:
nowtime=now()
deadlinetime=formatdatetime(now(),2) + " 8:30:00 AM"
response.write "NOW: " & nowtime & "<BR>"
response.write "Deadline: " & deadlinetime & "<BR>"
if nowtime<deadlinetime then response.write "can send out today" end if
if nowtime>deadlinetime then response.write "must send out tomorrow" end
if
RESULTS:
NOW: 1/18/2007 8:51:43 AM
Deadline: 1/18/2007 8:30:00 AM
can send out today
As you can see, NOW is GREATER THAN Deadline, so it should must send out tomorrow.
i want to calculate the total time between to dates and time.
Example: Total time elapsed from date 1 time 1 to date 2 time 2.
27/09/2004 11:00 - 28/09/2004 10:30
The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.
i am trying to get a time variable which is 30 minutes before the current time to use in a calculation.
The code I am using is:
validationtime=time-3000
response.write(time)
response.write ("<BR>")
response.write(validationtime)
but the response I get is incorrect along the lines of:
11:54:42
14/10/1891 12:05:18
What am I doing wrong, why is validation time also including a date
Can someone tell me how i can use a if loop
its related with time I want to display a registration form on 29 Jan 2007
only between 10am pacific time to 1pm pacific time
so only between 10am - 1pm pacific time the registration form should appear
i live in the central time zone
can someone tell me how i can make this happen.
I am trying to use the time function to determine whether or not it is morning, afternoon or evening.
I wrote my code and then changed the values it is comparing with to see if would work and it doesn't, it just stays on the good morning.
<% if time > 0 then %>
Good Morning <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
<% if time > 12 then %>
Good Afternoon <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
<% if time > 18 then %>
Good Evening <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
Do i need to put quotes around the number i am checking with?
how can i get this tag to adjust for time zones? This is probably simple, but i just can't think of how to do it. Code: <%=Time%>
View Replies View RelatedI am writing an XML file with lots of Data and it takes time but before the operation can be finished I get this error
Quote:
The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.
How do I handle this?
Would anyone know if there is an easy and clean way of presenting maybe a time control field in html in an .asp page that allows a user to specify a certain time of the day? Currently using an <input name="SpecifyTime" type="Text"field but was wondering if there was a better way of doing this as to where users won't mistype in entering non time related characters?
View Replies View RelatedWould it be a stupid idea to use the Log Util component to retrieve the UTC date/time? It appears that the DateTime property could be used for this, but I'm not really sure how it searches through the log file.
View Replies View RelatedI've used this ASP funtion to display the time on my web page:
Date: <%= FormatDateTime(Date, 1)%>
Time: <%= FormatDateTime(now, 4)%>
THis was working fine until i moved my site to a server based in the states, not the time is 5hrs behind. help me resolve this?
I am using ADO to connect to SQL 7.0. At times the connection timeout expires. Is there any way to inrease the default time out? I think currently its 60 secs. Here is the code that I use to establish ADO connection.
set rs = Server.CreateObject("ADODB.RecordSet")
sCon = "DRIVER={SQL Server};
SERVER=Indy2;DATABASE=ProdProtrans;UID=xx; PWD=xxxxxxx"
How to find GMT time in ASP?
View Replies View Relatedi have two rows in data base with similar data except the time coloumn , the time coloumn is the only one with differnt times ex: 08:00am in one row and 9:00am , form the sql query when i taken the results where name='"&name&"' themn i am getting only one name . how can i compare the time with system time and get them login accordingly.
View Replies View RelatedDo we have any function in ASP that will convert US time(which is captured in the database) to IST
View Replies View RelatedI have a simple asp script that pulls data from an ingres database and
displays it on screen.
It all works fine except for date/time fields where the date >=
24/10/2004 and <= 31/10/2004 where it takes 1 hour off the time ie
in the database I have 24/10/2004 08:00
the asp displays 24/10/2004 07:00
The same thing happens for the same date next year.
Any thoughts?
I want to print only the time of the date. the date is in format "dd/MM/yyyy hh:mm AM/PM"
View Replies View RelatedI am using 'Microsoft Visual InterDev 6.0'
as my editor 4 asp.
I just one 2 know, how can I set the debugger for it
in my client site ..