Falsh Text If Time NOW() IS < 20 MINUTES AWAY

I need to Flash dynamic text on ASP page if the time in the record is less
than 20 minutes from NOW() time.

View Replies


ADVERTISEMENT

Existing Minutes

is it possible to add a number in time? i created a code which is something like this

x=date
y=x+2
response.write(y)

but it doesnt work... for example the time is 08:32:05 AM and im going to add 2 minutes the result should be 08:34:05

View Replies View Related

Now() Minus 20 Minutes?

I wish to count the lastLoginDateTime field that has any date and time in it that is within 20 minutes of now(). Code:

View Replies View Related

Minutes Tracker

Has anyone come across a system for tracking meeting minutes written in ASP? I have searched quite a bit on the web and I haven't come up with much. It looks like I will have to write my own unless someone has any ideas.

View Replies View Related

Calculating Minutes Between Dates

I need to calculate the number of elapsed minutes between two datetime variables. BUT, it needs to only include times between 8am and 5pm on weekdays.

So if the starting datetime is at 5:01pm, it doesn't start counting until 8am the next weekday morning.

Or, if the ending datetime is at 6:30am, the counting would stop at 5pm the previous weekday.

View Replies View Related

Converting Seconds To Minutes

I have a column in my Access db that stores a number which is supposed to be seconds. How can I convert the seconds to display mm:ss on my ASP page? For instance, if the number in the db is 300, I want it to display 5:00 on my page.

Now these are lengths of time, not current time (AM or PM), so I dont want it to display the AM or PM. I've tried format(rs("length"), "nn:ss") and that didnt work. Matter of fact Format(), FormatDateTime(), and FormatNumber() doesnt work on my page. I've been getting the 800a000d Type Mismatch error. What am I doing wrong? Code:

View Replies View Related

Session Timeout 60 Minutes

I am trying to make an access control where a code should be available for 60 minutes. When my user is login on I am doing this, after his access code has been authorized:

Session.Timeout=70
Session("Time")= Dateadd("n","65",now())
And in the pages where is allowed (for one hour) I am doing this:

if cdate(Session("Time")) < cdate(now()) then
Session.Abandon
end if

Does it look correct or is there a better way of doing this?

View Replies View Related

Generate An Application To Check Something Every 20 Minutes

I want to create a 20 minute loop to generate an include file based on the html output of another file on a remote server. Is this possible using ASP? If so, how do you generate an application to check something every 20 minutes?!

View Replies View Related

Time Calculation :: Difference Between Login And Current Time

I would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.

View Replies View Related

ASP To Re-load Page From Time To Time To Reset Varaibles

I have a website that I subscribe to that allows me to track tasks. I have an extra computer with a big monitor that i want to always display the task list. the problem is after so many hours I get logged out.

I need to need to reload that sign in url every few hours Code:

View Replies View Related

Comapring Database Time And Computer Date/time

there i was just windering how do i compare a date/time vlaue in sql server agaisnt the computers' date/time.
for example, if computer date/time is two months or 2 weeks before the database date/time do something

View Replies View Related

Time/Date Format And Changing Time To GMT

Currently working on a ASP for a friend, which requires the date and
time on it. It pulls in entries from an Access Database with dates and
times in the format of:

"Fri Oct 17 18:02:46 2003"
However my date and time on the ASP page is displayed as:
"Friday, October 17, 2003 18:02:46"
using the script:
"<%Session.LCID = 1033%>
<%=FormatDateTime(Date(), vbLongDate)%>
<%Session.LCID = 2057%>
<%=time()%>"

Anyone know how to change this script, fully or partly to produce the
date and time on the format that's in the access database i.e. "Fri Oct 17
18:02:46 2003" Code:

View Replies View Related

Time Convert String To OdbcType.Time

I am working on a database that collects information about incidents. One of the fields that people enter is the time of the incident. I am trying to convert that string that people enter into a OdbcType.Time and I am at a lost.

View Replies View Related

Local Machine Time To Eastern Time

How will we convert the system date & time to other timezone for eg: Eastern Time zone using ASP?

View Replies View Related

Time Function Returns Wrong Time

When the Form is submitted I use the Date() and Time() functions to put the date and time into the Body part of the e-mail. The time reported is three hours earlier than the time at which the Form is actually submitted.

I understand these functions are evaluated on the server so the server must be in a time zone three hours earlier than where I am . Is there any way I can get the local time at the location where the user is actually located. ?

View Replies View Related

How To Get Asp Execution Time And Database Connection Time ?

Any some tools or sample codes drop down asp script execute time and
database connection time ?

View Replies View Related

Server Time Local Time Convert

I'm trying to do a very simple code that converts the server time into a time zone of your choice.

<%
dim h 'Current Hour
dim i ' Time Zone Increase - add or subtract hours
dim r 'Result Here
h = Hour(Now)
i = + 2
r = h + i
%>

but obvisouly i'm having trouble with the time zone convert.

View Replies View Related

Compare The NOW Time With A Deadline Time

I am trying to compare the NOW time with a "deadline" time. Please help. Just not sure why this is not working. I need to be able to say IF IT'S BEFORE 9:30 TODAY, IT'S OKAY TO ADD SOMETHING. IF IT'S AFTER 9:30 TODAY, YOU MUST ADD IT TOMORROW.

CODE:

nowtime=now()
deadlinetime=formatdatetime(now(),2) + " 8:30:00 AM"
response.write "NOW: " & nowtime & "<BR>"
response.write "Deadline: " & deadlinetime & "<BR>"
if nowtime<deadlinetime then response.write "can send out today" end if
if nowtime>deadlinetime then response.write "must send out tomorrow" end
if

RESULTS:
NOW: 1/18/2007 8:51:43 AM
Deadline: 1/18/2007 8:30:00 AM
can send out today

As you can see, NOW is GREATER THAN Deadline, so it should must send out tomorrow.

View Replies View Related

Time Calculation :: Between Two Dates And Time

i want to calculate the total time between to dates and time.

Example: Total time elapsed from date 1 time 1 to date 2 time 2.

27/09/2004 11:00 - 28/09/2004 10:30

The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.

View Replies View Related

Controlling Text In A Text Area Or Text

I have this problem in controlling a the text in a Text Area. How can I do
that for example the field size is 200, when it reaches 50 it automatically
goes to the next line. Bcoz im having problem when viewing it in my report,
it continuesly views in a strieght line and im having problem in printing.

View Replies View Related

International Text And FSO Created Text Files

When using ASP's FileSystemObject to create text files, I am unable to get user submitted text (in Hebrew) to save as anything other than "?????". The text file is being saved in Unicode and setting the CodePage in ASP proved unsuccessful. Strangely, hard coded Hebrew text in an ASP variable does add to the text file correctly.

Any ideas of why this happens and how to get it to work correctly?

View Replies View Related

Text Area Limited Text

I have a text area which I want to limit the number of words or number of text entered into it. Is this possible?

<textarea name="textarea" cols="35" rows="5"></textarea>

In the text area above, can I say limit the person filling in the text area to say 100 characters?

View Replies View Related

Text Box In Form Cutting Text

I have a form on asp page that pulls info from a DB when the page loads.
It them puts the info into text boxes on the page that are editable by the
user.

The only problem I have is say in the description text box it should
read "HP Laserjet 5Si" , it always cuts the text off where it just says "HP"
.. It does this on all the text boxes? I can't seem to figure out why it
is doing it. Here is the sample code:

With quotes around <%= vdesc%>

<td><input name="desc" type="text" id="desc" size="45" value="<%=
vdesc%>"></td>

And I tried it without.

View Replies View Related

Regular Expression Of Text OR Text OR Etc...

I have text in a field coming from a database. The text has various
forms such as:

text1
text1 or text2
text1 or text2 or text3
text1; or text2
text1; or text2; or text3
etc...

how can I parse this with a reg ex? I tried this:

(.+);? or

but it only captures 1 submatch (text1) and only if theres an "or"
after it

I'd like to get 1 submatch for each piece of text separated by the
"or", just the text itself if there is no or.

Anyone know how to do it?

View Replies View Related

Controlling Text In A Text Area

I have this problem in controlling a text in a Text Area. How can I do that, for example the field size is 200, when it reaches 50 it automatically goes to the next line. Because im having problem when viewing text in my report, it continuesly views in a straight line. Can you give me ASP code for that.

View Replies View Related

Hover Over Text To Bring Up Text

I have text - ARI Promise, when I hover over the text I would like a box to appear with the Promise information. It would be several paragraphs that need to be formatted with paragraph and bullets. Is this possible to do? If so how would I go about it?

View Replies View Related

Display Text In Text Box

I have a search page, after search returns value I want to display fields in text box instead of table.

View Replies View Related

Error In Asp Text: Command Text Not Set For The Command

I am getting the above error in an asp page. Not sure why? The error details is given below. Code:

View Replies View Related

Time

i am trying to get a time variable which is 30 minutes before the current time to use in a calculation.
The code I am using is:

validationtime=time-3000
response.write(time)
response.write ("<BR>")
response.write(validationtime)

but the response I get is incorrect along the lines of:
11:54:42
14/10/1891 12:05:18

What am I doing wrong, why is validation time also including a date

View Replies View Related

Time

Can someone tell me how i can use a if loop

its related with time I want to display a registration form on 29 Jan 2007

only between 10am pacific time to 1pm pacific time

so only between 10am - 1pm pacific time the registration form should appear

i live in the central time zone

can someone tell me how i can make this happen.

View Replies View Related

Using Time

I am trying to use the time function to determine whether or not it is morning, afternoon or evening.

I wrote my code and then changed the values it is comparing with to see if would work and it doesn't, it just stays on the good morning.

<% if time > 0 then %>
Good Morning <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>

<% if time > 12 then %>
Good Afternoon <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>

<% if time > 18 then %>
Good Evening <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>

Do i need to put quotes around the number i am checking with?

View Replies View Related

Time

how can i get this tag to adjust for time zones? This is probably simple, but i just can't think of how to do it. Code: <%=Time%>

View Replies View Related

Time Out

I am writing an XML file with lots of Data and it takes time but before the operation can be finished I get this error

Quote:

The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.

How do I handle this?

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved