Go Back To Prev Page
I have a question that I haven't been able to figure out. All I have is Bits and pieces but still can't complete it. I have a form that users fill out and submit. I would like the form to displaying a message saying "Please verify that the following content has no error" If it does have any error Click the Yes button. It will redirect the user back to the form for correction to be made .
When the user hits the No button it send the information to the confirmation form and gets updated to the Database.Or something like that. I would the user to have capability to view their information before sending it to be updated.
View Replies
ADVERTISEMENT
I have an application which allow users to search our database. Quite a lot
of search fields pull data from other tables. I don't want to populate the
dropdowns (total 14 of them) from the database everytime as it slow the page
load.
Instead I would like to have a link next to the text field which a
user and click and the choices can be displayed and whatever the user click
in the pop up I want to transfer it to the text box and close the popup.
For example there is a Textbox called country. The user can either type in
the country name or click on the link which will pull all the countries from
table in the database and which ever country user selects, the textbox is
popluated with the country name and the pop up closes automatically. Code:
View Replies
View Related
I have a Fotolog system and i don't want the user back to last page using the Brownser ...
How I do it?
View Replies
View Related
I know in javascript you can use ..........
onclick="history.go(-1)"
to go back a page. However can i incorperate this into a 'Response.Redirect'. Or can ASP do something fancy?!?!?
View Replies
View Related
After updating a record, I want to go back to the results page from a search. Anyone know how to redirect after you update a record to go back a page to see the results again. A simple click of the back button would do the trick, but that can't be done after you click the update.
View Replies
View Related
if there was an easy way to have a form set up so that when the submit button is pressed, it goes to a confirmation page that contains a back button that goes back to the page that called the form.
Basically, I'm looking at a scenario where 10 pages can call the form, but I want to user to be able to click the back button and be returned to the page they were on when they click on the link to the form. I thought that maybe using javascript:history.go(-2) would work, but if the form is reloaded for any reason, gaing back 2 pages goes back to the form.
View Replies
View Related
Response.Redirect("home.asp")
instead of redirecting them to home.asp page, how can i redirect them back to the page they came from?
View Replies
View Related
normally I can redirect to my previous page with referrer. is it possible to go one more previous page is in java script. I mean like,history.go(-1), history.go(-2), etc.
View Replies
View Related
For security purposes I would like to know how to disable. The back button in the browser and/or expire the page.
View Replies
View Related
I've got several pages with links. When the links are clicked, a value is posted to 'processing.asp' which does a database update then needs to redirect back to the page from which the link was clicked. Is it possible to obtain the full URL of the referring page using asp? I need it potentially to be able to redirect back to something as complex as:
products.asp?Category_Id=3&SubCategory_Id=12
If that was the URL of the page from which it was linked.
View Replies
View Related
I have a html form which allows the user to select add, delete, update or view from a drop down list. Their choice is sent to an asp page.
My problem is how to send them back a form from the asp page depending on their choice and send the resulting input to the same asp page again for processing.
So if they choose 'add' from the html page then that is sent to the asp page and they are sent back another form, to fill out the new record details which is in turn resubmitted to the same asp page to carry out the 'Insert' statement.
View Replies
View Related
How to pass data back and forth between ASP and JSP page?
Let's say I have Java objects, how to pass the data back to ASP page?? Or
ASP has data, how to pass the data to JSP page??
View Replies
View Related
I have an ASP page that lists a recordeset that can have dozens of records, at the end of each line is a details link that links to a page giving more detailed information about the record where a user can add and update information to that record.
At the top of the update record page I have a Back to Record List page. The problem is that when a user hits the Back to Record List page they are taken back to the Top of the list, I'd like to create a link that will take the user back to the record they just updated. I am carrying the data record number through the querystring.
View Replies
View Related
I want to have a series of links (flags for Italian, English, and German) on the top of every page, each of which when clicked will go to a script and change a session variable called language to the respective language. Once the session variable is changed, I want to send them right back to where they came from.
So, if they enter a page on the site that is optimized for "Local Area" and it is in English, IF they click German or Italian it will go to the script, redirect back to "Local Area" with the Session var being set appropriately.
Keep in mind though that I need to be conscientous of SEO, so I want to keep querystrings to a minimum. Ideally, what it would look like is this AFTER the redirect:
www.mysite.com/local-area.asp for English
www.mysite.com/local-area.asp?l=i for Italian
www.mysite.com/local-area.asp?l=d for German
View Replies
View Related
I have a quick signup for a friends page, and at the end of the signup I wanna destroy all the session variables using the nice session.abandon then create two session variables for the username and password so they're already signed in, then redirect them to the index page already logged in. Problem is the session variables don't get saved on the redirect when the session has been abandoned on the page. If I take the abandon out and destroy the session variables individually everything works fine and the new session variables survive. But if I abandon the session then set the new variables they do not. Yes, they are being set after the abandon, and do exist as I've written them to the browser before the redirect. Its not that big a deal in such a small scale to delete all the variables individually, but theres gotta be a way incase it was hundreds of session variables right.
View Replies
View Related
how to detect when the user click on the back button to go back to the previous page? Or a way to refresh a ASP page whenever it's loaded?
View Replies
View Related
I have created 2 asp pages called testa.asp and testb.asp
testa.asp has a link to go to next page testb.asp
testb.asp has a form that ask you for a reference number and post it
to the same page testb.asp
If the reference number is not blank, it will just write out what the
reference number is.
Now my problem....
If you go to testa.asp and click on the link to go to testb.asp you
will see the form. At this point, if you click the back button, it
till take you back to testa.asp ALL FINE SO FAR.
If you go to testb.asp again and see the form, enter a number say 33
and click on search. This will now show you the number you have just
entered. NOW - click on the BACK BUTTON, it will just show you exactly
the same page ! WHY does it not go back to the FORM in order to refill
in a different number. Code:
View Replies
View Related
I have a form submit that must report back to the same page an error if a pair of radio buttons inside the form block are not checked. But data from the buttons must still be sent to another page.
I tried having the form send data back to the same page, then putting the data in session variables and redirecting to the page they have to go to. But apparently the session variables are having unpredictable effects on the very complex page I'm sending the data too.
I'm thinking about using Onsubmit = somefunction inside of the <form > . I've tried javascript but I haven't found the right code yet, and also I'd rather avoid the popup alert box, it is inconsistent with the rest of the website. Perhaps an ASP subprocedure could do the trick?
View Replies
View Related
I am using JQuery's thickbox 3.1 and ASP.
I want perform : click a link in main page, then pop up a form in div window by thickbox, after I sumbit this form , div window disappear and go back main page.
My problem is : after I sumbit the form inside div window, form is sumbited , but still in div window!
How can I make it jump back to main page after I submit ?
View Replies
View Related
im tryin to secure my application. i want the application to send the user back to the login page if they have not logged into the system. do i use the global.asa file or is there a simpler way to do this?
View Replies
View Related
How can I redirect to a page when I click the window back button. I think javascript will do. But I will embed it to my php script.
View Replies
View Related
I'm need to open a popup window from an asp page that calculates a value. This value must be returned to the input box on the asp page. I have managed to get the popup window to open and display a value so far but I am not getting the value back into the asp page.
Popup Window code...
View Replies
View Related
Is there a way in ASP to prevent users from accessing a web page when the back button is pressed in the browser.
View Replies
View Related
I have a form that submits values to an asp page. If their is an error on the asp page that is called and you go back to the first page with the form. The values are not in the form.
How can I set the value back into form without the user having to retype them in? If I use hidden fields on the first asp page and I go back to that page wouldn't the values for the hidden fields be empty as well?
View Replies
View Related
I need to read a SQL Server table into a Web Page and within the Web
Page to permit my users to make changes to the records, delete or add
new records and then save the entire contents back to the SQL Server
table back.
The functionality I am looking is almost the same as In the SQL
Enterprise Manager whereby I can choose a table open the table and
then return all rows and I can maintain the same and save it back to
the SQL Server table. I want almost a similar web interface to such a
functionality.
Even if not a generic functionality as the SQL Enterprise Manager
table maintenance appreciate if somebody can share the code with a
sample how I can do it in ASP pages + T-SQL if need be.
View Replies
View Related
I am building a website to pull data from a remote https site using xmlhttp. The data from the https site is behind a login screen. I can successfully get through the login screen with:
set objXMLHTTP = Server.CreateObject("Msxml2.ServerXMLHTTP")
objXMLHTTP.Open "POST", "https://website.com/validate-login2.asp", false
objXMLHTTP.SetRequestHeader "Content-Type", "application/x-www-form-urlencoded"
objXMLHTTP.Send "Username=uname&password=pwd&company=O"
That works great - but then, when I try to go to the next page (where the data is that I want to pull) - I use the same process and I get kicked back out to the login screen? Could there be some cookies, referer, strings being passed normally that I am not including in my second request - How do i find out for sure?
I have used the software IETrace and it looks like some cookies being passed, but how do I know for sure if (and what exactly) it is using?
View Replies
View Related
I run an internet radio station and we use a program which comes with a PHP template but we use ASP and I do not feel like learning a brand new language tonight. Basically the program runs off of a DB on my local machine and it can accept requests and dedication through the website which are submitted with the help of XML.
In the PHP template it looks as if PHP generates an XML code and then sends it to my local machine and the program. The program then processes the request and sends back a completely different XML page with the results.
Kind of like a basic HTML Form. Anyways, what I am having trouble with is generating the XML code with ASP which I accomplished with the help of W3Schools but now when the script comes back from the program all I see is the XML. What I should, rather want to see/do is have the ASP read the XML just like PHP did and then display the end result to the user.
View Replies
View Related
I've got a form which people will fill out on the web with information such as there name, email address etc.
Ive got it to email through to me but any ideas how i can also get it to email a message back to them based on the email address they place in the email field?
View Replies
View Related
i keep getting locked up, ctrl/alt/delete and a window opens up and say's web back agent not responding. is there a way to overcome this problem. it happens no matter what program i'm working with.
View Replies
View Related
i have this prob. example,
i have created 2 .asp pages which,
1. Index page
2. Adding asp function
User will start to add contents in index.asp, then clicked on the "Add" button. the form will post to addContent.asp to add the contents to the database, then prompt the user for Adding contents complete and lastly display the added content to the Index page.
However, when i clicked on the "back" Button at the IE Standard Bar, it display the addContent.asp page and prompt user for the last msg -> "Adding contents Successfully". how can i redirect the page to the previous page before the adding page when the user clicked on the "Back" button at the IE Bar?
View Replies
View Related
I'm trying to make a logout link to where once someone logs out, not only will they be sent to another page, but they will not be able to go back into their account by pressing the back button, but by logging back in.
View Replies
View Related
I always heard people saying IIS ASP front end, and MS-SQL back end. ASP is
for server side programming and dynamic content generation, how could it is
called front end? Because I thought it is executed in the server, which is
back end? I think I am confused with the term front end and back end here.
View Replies
View Related
I'm creating a logout page(logout.asp), in which I'm using Session.abandon.
Once the user logs out, I don't want the user to be able to access the previously visited pages using the Back button.
View Replies
View Related
