HTTP To HTTPS Redirect
I am using the following code in my default.asp page to redirect the page
from HTTP to HTTPS
<%
if Request.ServerVariables("HTTPS") = "off" Then
Response.Redirect("https://" & Request.ServerVariables("HTTP_HOST") &
Request.ServerVariables("URL"))
End if
%>
I got the code off of a website and found that many web sites had similar
code for doing the same thing. The problem I am having is that the code
will not redirect to the HTTPS and will keep reloading the page. Is there a
setup issue with IIS that I might be missing?
View Replies
ADVERTISEMENT
I'm trying to detect if the user is utilizing HTTP or HTTPS in the address
bar. The following code responds true regardless of whether I use HTTP or HTTPS.
What should I be using? In the end, if the user types in HTTP, I will
redirect them to HTTPS.
<%
If Request.Servervariables("https") <> "" Then
Response.Write "this is https...OK!!!"
End If
%>
View Replies
View Related
I have a site that requires a checkout process. THe checkout process occurs in the secure server. I need to pass session variables from one server to the next.
View Replies
View Related
I've integrated a secure certificate into my e-commerce site. However, when I forward people to the account log-in area (https) all of the relative links on the page obviously then point to http://www.mydomain/homepage for example.
How do I do what Dabs do, and redirect these links back to non-secure pages, without hard-coding all links as full URLs?
View Replies
View Related
I wish to have a web site that has most of the pages as normal HTTP pages
but has some areas that use HTTPS. I want to have it that if a user selects
a link to a HTTPS page that they go there an there Session Information is
kept. I also wish to have the pages switch automatically to HTTPS if a
visitor types the URL without the HTTPS. So my questions are:
1) How to redirect to a Secure Page without losing Session Info?
2) How to test if page is accessed by HTTPS, and if not switch to HTTPS
quickly?
I think something like this code is what I want but how do I do it.
<%
if not "HTTPS" then
response.redirect(https://mysite.com/securepage.asp)
end if
%>
View Replies
View Related
Just to explain what's going on briefly... I've added an include to the top of all files on our site (this code is pasted below) to check IP address, and then some pages will display slightly different content for our Canadian or US customers.
This works fine in Firefox. However, in IE, when a Canadian visitor comes it doesn't display canadian content on the http version of any page. Once they go to a https page, it works just fine. After that, if they go back to an http page it still displays properly. Code:
View Replies
View Related
if a URL is
https://www.mysite.com/mypage.asp
clients are redirected to
http://www.mysite.com/mypage.asp
This works fine for all but 1 client. He looses a session during the
redirect. Apparently his browser interprets https:// and http:// as
different domains.
View Replies
View Related
I have a login page that's https and after logging in should redirect to the
home page http://www.example.com
<form id="Form1" method="post" runat="server">
No matter what I've tried it tries to redirect to https://www.example.com
(https)
Exact error is:
The page cannot be displayed:
......
500 Internal Server Error - The network logon failed. (1790) Internet Security and Acceleration Server
Does anyone have any clue as to what's going on here, and how to fix it?
View Replies
View Related
I need some help/pointers here. I maintain an ASP/MSSQL e-commerce site.
I need to force the use of HTTPS for private/payment data and force back HTTP on other pages. Some googling taught me the use of checking Request.ServerVariables("HTTPS"). Though GET data/QueryStrings are passed all my POST data is lost because of the REdirect. Code:
View Replies
View Related
I have no idea if this is actually possible in plain asp but any help might
be welcome :
After a user has downloaded some content/file from my webserver (http_status
=200) I would like to redirect him to a file -lets say- "ThankYou.htm"
So basically sth like this
If Response.Status ="200 OK" then
Response.Redirect "ThankYou.htm"
Else
Response.Redirect "GetLost.htm"
End If
The question is : how would i implement this ONLY for the document to be downloaded ? The document to be downloaded is part of a collection from a DB query - so it is know to me as sFileName = rsPDF_ID("PDF_File")
View Replies
View Related
I need to implement an application that receives http calls from a remote
client, do something with it and returns some feedback. I want to use IIS
(version 6) as my front end http server (with https and ssl services) which
will facilitate all the requirements of a http server and then foreword the
incoming call to my application and will return the process result to the
client at the end.
Does IIS support this? And if yes - what are the requirement from my application to use it (built in .net if anyone interested)?
View Replies
View Related
I need to redirect to another web page, but that redirect will include the
submission of form data. So, unlike ServerXMLHTTP which stays on the
originating web page, I need the script to redirect to the page that I'm
submitting the POST data to (without pressing a submit button).
Any suggestions?
View Replies
View Related
I used a Response.Redirect "page.asp" as the last command in ASP code that
processes a submitted form from an Adobe PDF form (using HTML format). For
some reason, if there is any linked file (image, stylesheet, javascript) in
the target "page.asp" IE hangs until you press Escape. With Refresh, the
page loads completely.
I checked the web log and the entry for "page.asp" is 200 (OK) but all the
files I mentioned above all show 400. The description for this status code
is pretty generic and not much help (a syntax error in the request and the
server doesn't understand it
I can't control the syntax of the request so how can this be fixed? (and how
could the submit from the PDF form have anything to do with this since other
HTML forms directed to an ASP page with images etc. works fine.
View Replies
View Related
I am able to get the value for "request.ServerVariables("http_referer")". However, I try to use this value in a "response.redirect" and the value disappears. Why is this happening. Example:
-------------------------------------------------------------------------
If Not Session("whatEver") = True Then
Dim httpVar, EncodeHttpVar
httpVar = Request.ServerVariables("HTTP_REFERER")
EncodeHttpVar = Server.URLEncode(httpVar)
Response.Redirect "https://www.blah-blah/extranet/index.html?referer=" & EncodeHttpVar
End If
-------------------------------------------------------------------------
What am I doing wrong.
View Replies
View Related
i'm using windows XP, IIS 5.1, Visual .NET 2003 and SQL Server 2000.
When I open New Project - Visual C# Projects - ASP .NET Web Service -
Location : http://localhost/WebService1
After that i click OK, then it returns error
"The web server reported the following error when
attempting to create or open the web project
located at the following
URL:'http://localhost/WebService1. HTTP/1.1 302 Found"
After that i try this : Code:
View Replies
View Related
I find that all the values of the session variables i have created is empty when i use https. I am sucessfully able to use these session variables in the other pages that does not use https.
While making a shopping cart and using https for checkout process. What is the best method to retrieve cart values like item, total etc. Currently i'm using session to access these values in different pages during checkout but the problem is what i have mentioned above when i use https. What method do u prefer and how does it work?.
View Replies
View Related
I have a question regarding https and SSL between two web
sites. I am not quit understand how asp application can
handle https, encryption and SSL. Here is scenario:
An asp application on my web site requires to get form
data from web client and to convert the data with XML
format and send the data to another web site which only
accepts https protocol.
If my site needs to receive information from the remote
web site, then I know a digital certificate needs to be
installed on my side. and https configuration needs to be
implemented on local web server.
However, if all of local side need to do is to send data
to remote web server with data encrypted, do I still need
to install digital certificate and enable https on local
web server? If not, how can I encrypt data with the the
certificate so it can be accepted by remote server and be
decoded by remote server side?
View Replies
View Related
I'm in a non-secure page (http). When I click on a submit button, I'm about to enter the secure page (https). But I got the popup saying that I'm about to enter a non-sercure page, wanna continue(yes,no).
If I click YES, it take me to "https" page. This doesn't make any sense at all.
View Replies
View Related
I'm working on an e-commerce site and we've just purchased a secure certificate to transmit a shopping cart to the payment gateway without fear of tampering.
Question is, should the whole site be built on https:// or should only the form which posts to the payment gateway be secure?
View Replies
View Related
I need to implement in my site the HTTPS. But I don't know anything about
this. Can someone help me or give me a way to learn about it?
View Replies
View Related
I have enforced SSL connections on my website to make it secure. My problem is if the users go to http://wesite-url they get an error message saying:The page must be viewed over a secure channel
The page you are trying to view requires the use of "https" in the address.
Instead of showing this error page, I want to automatically redirect them to https://website-url. Is it possible?? Do I need to to program this in gloabal.asa?
View Replies
View Related
I am developing an application over the web(intranet app). Now my problem
has to do with secure communication
between browser and webserver. I want to enable secure communication using
https. Are there any alternatives other than buying certificate for virtual
directory ?
View Replies
View Related
I am trying to write a routine that allows users to download files from our secure site, with the code below the file will download and when you click save i get an IE error. However when the page is not https the routine runs just fine. Any Ideas?
View Replies
View Related
How I can enable or configure https on a certain page(file).
View Replies
View Related
I am trying to access a .NET web service over https:// using Microsoft.XMLHTTP but I am receiving "A security problem occurred. , Number=>-2146697202" error. I guess it is bacause of https certificate challenge. Is there a way to accept the certificate in ASP.
My sample code is:
View Replies
View Related
I am trying to use the following in an ASP page to redirect a user to a
non-anonymous FTP site:
response.redirect("ftp://myusername:mypassword@ftp.mysite.com")
but I keep getting a "permission denied" error. If I just put the same
address string in IE6's Address box and go to it, IE opens myusername's FTP
home page just fine, so I know the FTP site is working as expected. Also,
if I put in an anonymous ftp site, without the username and password (e.g.
"ftp://ftp.microsoft.com"), the redirect works fine, too.
I don't want the user to be prompted by IE for the username and password at
the FTP site, so I am providing them from within the web site.
What can be preventing the response.redirect from handling non-anonymous FTP
access? Is there a better way to do this?
View Replies
View Related
in ie 5 i m writing this below statement
http://localhost/Mail/email.html
email.html page contains 3 field box username , password and name .it calls the form2email.asp page
the code is that
<FORM name="mailform" METHOD=POST ACTION="form2email.asp">
but when it calls that page ie5 shows error
HTTP 405 - Resource not allowed
Internet Explorer
what is the problem
View Replies
View Related
I'm using XML HTTP in an ASP to import HTML content for clients from
their existing web pages. But for some reason, the tabs are now ?'s
What can I do to handle this?
View Replies
View Related
If someone puts a link into my form and I display it it will show:
http://http://www.abc.com as I put an additional http:// in front. So what I want is to detect is user has typed in http://, replace this and then input into DB or display.
I can use the replace function, but how would I check if first 7 characters are http:/
View Replies
View Related
I uninstall IIS and install it back again, will it solve the "HTTP 403.9 - Access Forbidden: Too many users are connected Internet Information Services" problem? I am running on Windows XP and using IIS 5.1 . I got this problem when I created a search page in Frontpage but I have deleted it when I found out I have this problem. I have disable HTTP Keep Alives in the IIS properties but I still cant resolve the problem.
View Replies
View Related
When i try to post message or try to open a new account server gives this error :
How can solve this problem
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
/Start/Forum/register_new_user.asp, line 193
View Replies
View Related
I am getting the following error when trying to run an SQL insert in my ASP page and I cannot find anything in TechNet that references this error.
Below are IIS messages:
HTTP 500.100 - Internal Server Error - ASP error
Internet Information Services
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80040E14)
Issue selected is no longer valid. Please select another issue.
/ActivityTrak/maintain/activityedit.asp, line 542
View Replies
View Related
It seems to me that if I can have a regular .asp page that contains multiple <input type='file'> elements, and a user could browse to individual files and fill up all the elements on the page, that there should be a way to replicate the HTTP post data. Can
I somehow make my client-side activeX component post the same type of data?
I tried using MS Stress Tool to view the post data being sent from a regular.asp page that contained several <input type='file'> elements.I saw that there was a structure to it. The structure contained the binary data of the files I had selected for upload. But, I have not been able to figure out how I would replicate this structure in my
client-side activeX component
View Replies
View Related
