A week or so ago, I needed to find the HTTP_REFERER environment
variable to check and see if a user is coming from a certain website:
If Request.ServerVariables("HTTP_REFERER")_
= "http://localhost/mydir/page1.aspx" then
response.write "Click on a menu choice"
else
response.write "check back later
end if
I have a page nested in an IFRAME (for example framepage1.aspx or
..asp), and I need to check to see if a user is coming to (not coming
from ) a certain page where the framepage1.aspx is (the
framepage1.aspx could appear in not only page1.aspx, but page2.aspx ,
or page3). I'm not sure how to accomplish this given that the
HTTP_REFERER checks on address only incoming.
I never used any ASP or ASP.NET and i want to know if this is something worth learning. I am about to start learning PHP (i know PHP a litle bit already) but will it be better to learn ASP.NET instead?
How does ASP.NET compares to PHP? I know that PHP is free, what about ASP.NET? Which is easier to learn/implement? Which is faster? Which is more powerful? What are the strong/weak points of each?
i hope no one is getting sick of my server.execute/transfer questions.. does server.execute return a value? im wondering what happens if an error occurs in the .asp file that i'm calling with the server.execute command?? is there a value/flag i can set in the case of an error that can be seen once i return to the calling page? if not i was thinking that i would have to use a session variable for my error handling. i want to stay true to the model, view, control architecture so i don't want to simply redirect in the case of an error - i want to send a value back to my control page which will decide where to go.
First, how can I get asp to create a table in en existing DB that is an atuonumber. Meaning.. If say table 56 exists alrady, I want it to create 58 as the name. Along with this, I need to copy the fields from table temp, into the above DB. Can this be done?
I was reading up on sessions, and on websites they don't mention "passing" session varables. But the guys on this form are asking questions about passing session variables. So what is it? Can you or can you not pass variables? I don't think you can pass session variables, since they are just cookies.
Second, does the session expire when the brower closes? I know it expires with Session.Abandon or it times out.
For my project I need to the user to login and do his/her stuff. The session should expire by timeout, or logout link (Session.Abandon) and when they close the browser. My guess is that when the browser window closes the session expires. I just need to make sure about those two things.
I am trying to create a hashtable in ASP. I need this to be on the application level, i.e. each page from different users calls the same table. I figured the best way to do this is through a recordset.
I need it super fast so I want it loaded into memory (RAM) and be altered in memory. What is the best way to do this? I found all these different connection types, but nothing seems to fit this purpose.
Now what I would like to be able to do, is throw those tabs on the bottom of the page. Is this possible? How do I go about doing this? Could someone supply me with the changes in code I need to make?
i have a scenario where i have to serve users of my site questions on daily basis,but before they can answer a question they must answer a previous question correctly served previously before the current day .
This means to me that i have to keep a log of each questions served each day and users response whether they attempt the questions or not .i am scared to keep a scenario of a million users each day,their actions on a particular questions.what is the smartest way to achieve this.
I have seen sites that have asp searches and have a textbox and a search button and when the search button is clicked a search results field is displayed on the same page. Im having problems grasping how this works.
I am assuming that it states that if search is clicked then display the search results field. But how does it do this? Does the entire page reload? Is it a table that have attributes set to invisible then are change to visible? Anyone with an example or that can point me in the right direction please let me know.
A week or so ago, I needed to find the HTTP_REFERER environment variable to check and see if a user is coming from a certain website:
If Request.ServerVariables("HTTP_REFERER")_ = "http://localhost/mydir/page1.aspx" then response.write "Click on a menu choice" else response.write "check back later end if
I have a page nested in an IFRAME (for example framepage1.aspx or ..asp), and I need to check to see if a user is coming to (not coming from ) a certain page where the framepage1.aspx is (the framepage1.aspx could appear in not only page1.aspx, but page2.aspx , or page3). I'm not sure how to accomplish this given that the HTTP_REFERER checks on address only incoming.
I am designing a Web site with about 500 - 600 pages of festivals on it and would like opinions on two ASP subjects. I have designed about 20 pages or so as of now. These are the contact us, FAQ, about us pages and such. I also have a template to go by for each festival's page. But I have two problems I need fixed before I start to replicate.
(1) SSI and styles - There are four sections to each page. I use SSI (ASP virtual version) for the top, bottom and a small section of featured festivals (which is above the bottom) on each page. Between the top and featured festivals is the actual page. This way I can change a link on the top or bottom and it is fixed on all pages.
But, I have an enormous amount of styles listed (all styles on four pages) in the code from each page's fonts. Each page's styles are called something different. For example, the festival page itself has the styles as normal, ".style1." But the styles on the top the links, which once again is an ASP include, would be called ".style1top." I used that approach because .style1 on the festival page and top links could be different.
It works, but I have dirty code and I want the site to be as Google friendly as possible. I have thought about adding all the styles to a page and using it as an ASP include on all pages, but that would have way too many styles each page and be even dirtier. What is the best practice for this? Code:
I keep reading that Session variables are evil things to be avoided. Is it really that awful to use them? If you shouldn't use them, then what is the preferred alternate method for accessing data across an entire solution? Would it really be so bad to set something as simple as Session("login") = true Session(user)=username when a user logs in and just read those variables on an include for every page to display the user name?
Is it true that a user has to allow cookies in order for a session variable to be used? I thought the point of session variables was to set things on the server side so that you didn't have to worry about cookies being allowed by the user?
What is the generally preferred method of storing a shopping cart? Database, cookies or server variables? All I need to save is the product # and quantity. Would it be evil to store that in a dictionary object or a collection? My profs at the college said cookies were the way to go. My co-workers say use a database. My mentor says use a dictionary object.
I've made an access script user based for a forum, so, I'm not sure what to store in the cookie. I think to store just the user_id (the one in the users table referred to the logged user) but is this way sure ? is anyway to hack it simple ? I know that nothing is 100% secured, but not too simple to hack.
Have I to store other informations like session id or something other ?
Another question is for the login form... Somebody checks if the session.id of the user is the same between the page containing the login form and the page that checks informations... but is this really useful ? infact is an user stops on the first page (the one where is the login form too) reading something until the session goes to timeout then the check session fails...
I have a voting system that works perfect. It calculates the % of votes and shows the total percentage that people picked 1st, 2nd, and 3rd, and a total.
However, I want to be able to select the top 3 of those, and highlight the row, using a bgColor variable that I have defined. The problem with this is that I am calculating the %'s as I am writing the rows, and do not know how to check to see if that row is one of the top 3.
ASP And Visual Basic Interview questions and answers I have listed over 100 ASP and Visual Basic interview questions and answers in my website http://www.geocities.com/myintervie...VisualBasic.htm So please have a look and make use of it.
I would like to know how many rows and columns are created in the following array. Is it 10 rows and 2 columns or is it 10 columns and 2 rows? Dim Array(9,1)
I have searched for some info about it but not found any consensus. Some sources claim that the first number symbolizes the rows and the second number the columns and other sources claim the opposite. I am confused.
What is it really like? How many rows and columns?
Assume that I need an array with 2 columns and 5 rows then how should it be declared (4,1) or (1,4)?
Which is the first dimension and which dimension it the second one? Horizontally (first/second) vs vertically (first/second)?
How are the various elements called, for example how is the element on the first row in the 5th column called. By using (0,4) or (4,0)?
Assume that I want to store first and last names in two separate columns in an array and then expand the array by using Redim/preserve. The dimension I want to expand is the one with the rows because I view the array as a table with two columns.
I know there are certain rules that apply when it comes to using Redim/preserve on multidimensional arrays. Only the last dimension can be changed etc. How could that be done in this case? I am mainly interested in the declaration (1,x) or (x,1), where 1 is the number of columns and x number of rows (that is increased).
I've got an application setup that uses freightquote.com API to receive XML responses containing shipping information. A basic response example is as follows: Code:
I normally work with MS Access databases using ASP pages. I have been given the opprotunity to work on some available SQL server space, and wanted to ask a couple of questions. The following is a simple update query that I use. It is an ASP page that connects to an MS Access Db:
<% Set Conn = Server.CreateObject("ADODB.Connection") myDSN = "DRIVER={Microsoft Access Driver (*.mdb)};" myDSN = myDSN & "DBQ=xxxxxxxxxxxxxxxdatabase003.mdb" mySQL="UPDATE SKUList SET SKUList.Department='Furniture' WHERE SKU='123456'" Conn.Open(myDSN) Conn.Execute(mySQL) Conn.Close Set Conn = Nothing %>
I was wondering if someone could tell me (or better yet show me) how this code would look in a SQL server enviroment. I have no information on the server itself as the database will be setup for me, and I will just need to create ASP pages to connect.
I am developing a system for a certain use and now all the major programming is done. The next step is to include error checking for all the forms (there are 9 pages with forms to add data and 7 for editing, so total 16 forms)
I just started with the most simplest and I was wondering if anyone had a good suggestion on how to validate Dates?
I was also wondering if its possible for example to write a data validation script which I can use for all pages, because like one page has 90% date fields. If so, how can I accomplish that? Won't I need to pass the name of the text fields in some way too?
Is it possible to do that for other similar fields too, like first name, last name, phone number?
Oh yeah, the way the entering of dates works is that there are three separate text boxes, for Month, Day and Year. So a case date is divided into, case_mm, case_dd and case_yyyy.
Is there any way to grab the HTTP_REFERER server variable in a pop up? Example: www.site1.com pops open www.site2.com that needs to see if it was popped from www.site1.com
i wanted to monitor the traffic coming to my site. so i used http_referer tag to find the location from users are coming to my site. and i found a strange thing that i got only was able to trap a few referers and not all, and that too of a page of my site. i couldnt find any referer from anyother site... i mean the field remain empty in my Database for most of the referers. i wondered why is it so?
I'm trying to retreive information using Request.ServerVariables("HTTP_REFERER"), with no success. The users arrive to the page using simple link, and without being redirected or any other way - just a simple click on a link.
It is important to say that they click on the link in one website (Hosted on server A) and arriving to another website (Hosted on server B), where I'm using the HTTP_REFERER. maybe this is the reason to my problem ?
I've written an application that makes use of the HTTP_REFERER server variable to redirect users to a page they just came from. This has worked for everyone that's used the application except one person where they get the following error:
I am trying to add the http_referer to certain pages within my site but i am having a few problems, can anyone offer advise on what is wrong with my code below please:
<% 'test the user came from one of our pages If InStr(1,Request.ServerVariables("HTTP_REFERER"),"registration.asp") = 0 OR InStr(1,Request.ServerVariables("HTTP_REFERER"),"update.asp") = 0 Then Response.Redirect("home.asp") end if %>
I basically want any pages that contain a form on them to be checked that they have been submitted from within my site. The two form pages are called registration.asp and update.asp.
I am having a little problem with the use of HTTP_REFERER I have managed to get it to work correct and as required only if I add the full URI of my site, how can I do this so that I only have to name the pages in question. An example of my code is shown below
'test the user came from one of our pages If InStr(Request.ServerVariables("HTTP_REFERER"),"http://mydomainspace/eca/new_customer_reg.asp") = 0 Then Response.Redirect("home.asp") end if
Can anyone offer a solution in simple terms as I am an ASP newbie, so that I can remove the http://mydomainspace/eca and just use "new_customer_reg.asp" I currently do not have any databases and nor do i wish to yet - still learning the very basics first. I say this as I have seen several solutions that use databases.
test = request.servervariables("HTTP_REFERER") response.write test
It just gives me blank page and does not give me the URL. I tried request.servervariables("REMOTE_ADDR") it gives me the IP address but HTTP_REFERER is not working. What could be the reason.
Just wondering if anyone has found a way to grab the referring URL if the resulting page isn't from a HREF link.
To explain further:
I am creating an ASP driven weblog and am trying to avoid using the queryString to pull out the correct posts (Primarily for better search engine results). To do this I would like the user to be able to click on or type in something like
http://host/weblog/year/month/shorttitle
Under normal circumstances this would look for the default page in a folder called "shorttitle" but instead I defer this to a custom 404 error page which would strip out the URL and do a database query depending on the year, month and shorttitle.
However - this all works a treat when you click a generated link as the HTTP_REFERER is sent through in the headers, but if this is simply typed into the address bar the HTTP_REFERER is blank upon reaching the 404 page.
I have some one linking to my site, that I don't want linking to my site, and I get get them to remove the link. What i'm trying to do is redirect everything from that particular domian. I would prefer to send them off my site if possible but am willing to create a dead page if I need to.
I'm sure it's rather simple but I can't seem to figure it out (after much reading and several attempts).
