How Can I Have A % Or $ Show Up In An E-mail?
I am using a Cdonts e-mail script that e-mails the results of a form to my address. It currently displays the data like:
Amount: 12.00
Percent: 2.00
I need it to say:
Amount: $12.00
Percent: 2.00%
How can I get the $ and % symbols to be included in the e-mail template without getting a 500 error?
Here is what I have:
Body = Body & vbcrlf & "Amount: " & request.form("amount")
Body = Body & vbcrlf & "Percent: " & request.form("percent")
I've tried a few diffrent ways but here is one example:
Body = Body & vbcrlf & "Amount: $" & request.form("amount")
Body = Body & vbcrlf & "Percent: " & request.form("percent")%
I've tried using / before the symbols and "" but everything I've tried keeps coming up with a 500 error. How can I add these symbols to my template so they will show up in the e-mail?
View Replies
ADVERTISEMENT
I need some help: with cdosys i'm able to send e-mail from asp using the local exchange
server. Now I also have to save the sent mail into the user's mailbox for future reference: how to?
I'm using:....
View Replies
View Related
I'm using CDO to send mail to the site owner from ASP pages with forms.
Recently one of my forms is occasionally sending email with what seems
to be an insertion which is replacing the plain text part of the email
with something else. Looking at the server sent email source, the
hacked emails have the following:
View Replies
View Related
Here's the scenario. I'm currently using cdosys/asp to send mail to
our SMTP server. We use a product called MailFilter to check for SPAM.
It doesn't work very well. If MailFilter isn't working cdosys also has
problems and emails don't get sent. As these email are confirmations
for customer's bookings this means lots of customers calling to see
where their confirmation emails have gone. The root of the problem is
MailFilter but that here to stay. So I had this thought of sending the
message to a queue of some sort so at least they will get to the
customer eventually rather than being lost for good. So here's the
question:
Can I/How do I send messages to a mailbox on our exchange server using
cdo.message?
View Replies
View Related
I'm using CDO from my vb component to fire email. The problem is
whenever one of the email addresses in to, or cc is wrong then none of
the mails are fired even to the correct addresses. It gives an error
like
The server rejected one or more recipient addresses. The server
response was: 550 Relaying denied for <xfd@wre.com>
My code goes like this. Why is the mail server trying to look for the
validation of email ids??I want that atleast the mail should be fired
to the correct email addresses rather than no email fire. Can i
achieve that.
Dim iMsg As New CDO.Message
Dim iConf As New CDO.Configuration
With iConf
.Fields.Item(cdoSendUsingMethod) = cdoSendUsingPort
.Fields.Item(cdoSMTPConnectionTimeout) = 10 ' quick timeout
.Fields.Item(cdoSMTPAuthenticate) = cdoBasic
.Fields.Item(cdoSendUserName) = "username"
.Fields.Item(cdoSendPassword) = "password"
.Fields.Item(cdoURLProxyServer) = "server:80"
.Fields.Item(cdoURLProxyBypass) = "<local>"
.Fields.Item(cdoURLGetLatestVersion) = True
.Fields.Update
End With
Set iMsg.Configuration = iConf
With iMsg
.To = strToEmail
.From = strFromEmail
.CC = strCCEmail
.BCC = strBCCEmail
.Subject = strMailSubject
If strMailFormat = "TEXT" Then
.TextBody = strMailBody
Else
.HTMLBody = strMailBody
End If
If strAttachment <> "" Then
.AddAttachment strAttachment
End If
If intPriority = 2 Then
.Fields.Item("urn:schemas:mailheader:X-Priority") =
cdoHigh
.Fields.Update
End If
.Send
End With
View Replies
View Related
I would like to know if this can be achieved! On the form I a drop down menu that's called ("Escalation_type") the values are eta, hdtv, and supervisors. I have some ideas but I am not sure if it will work or not. If the use chooses an eta as a value I would like it to be sent a mailbox for exam: no@where.com. If they choose hdtv as value I would like it to be sent to a different mailbox. Can this be achieve by using the case statement or the if statement?
View Replies
View Related
I'm looking for an asp code who can send an email without using a mail component. I started to write somethings using winsock but I don't have enough time to finish it.
View Replies
View Related
is there a tutorial around anywhere that tells you how to change images on the page when a user selects from a select box
View Replies
View Related
I have a database of songs listed as Title, Artist,Description, DiscNo and TrackNo with a seperate record in that format for each song.What I would like to do is search through them for the Description, show only the disc numbers in the results.
This I can do easily. Where I am lost is that I only want each individual disc number to show once. If I moveNext through the recordset, it shows the disc number 15 times per disc. Is there a filter I can add to limit this display?
View Replies
View Related
Is there any way to input .asp code so that a specific element isn't show on a page? example: I don't want a menu on a specific product page, but I want it on all the others. Is there any code to input into a site wide includes file to implement this?
View Replies
View Related
I have a ASP application which let user to download their reports in pdf format. I would like to show a progress bar, or change the mouse cursor to a hourglass while the user is waiting for the file. How to acomplish this? In the asp code, I use response.BinaryWrite to create the pdf file directly to the browser. How to detect when the file is ready?
View Replies
View Related
I create a page which will show me all the Regions from the table "RegionTable" where I have no information (empty fields) in on of the fields RegionDescription or RegionRank.
It is to make my content managing easier. I do not want to see those records which contain all the necessary info (region description and rank).
I tried the following code, but it does not work
qry = "SELECT * FROM RegionTable WHERE RegionDescription="" AND RegionRank="" "
error message is:
([Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1)
View Replies
View Related
I have a query that displays values from a db.
The problem is that the value displays like this:
R 6.5
instead of like this:
R 6.50
How would I get it to show the full value?
View Replies
View Related
ok, well what I have been having some trouble with is to show the person character name like this:
Welcome, 'Username' <-- Here I want it to show the persons username from the database.
View Replies
View Related
I know we have this thread somewhere, but I can't seem
to find it now
I want to show the first 100 chars of a string, but
I don't want a word to be cut in half at the end, it must
show the whole word then and go a bit beyond 100 chars.
View Replies
View Related
How do you print out all of the contents of an array if all you know is the array name?
FOr example, I am looking at pre existing code that looks like this:Code:
scartItem2 = session("cartItem")
arrCart2 = session("MyCart")
For Z = 0 to scartItem2
cartfields2="&Email=YES" & "&processed" & z & "=" & arrCart2(cProductid,z) & "&quantity=" & arrCart2(cQuantity,z)
What I need to find out is if there are ANY other elements other than cProductid AND cQuantity in this array and what their names would be so I can add them to the code.
I know that I could print out the values of the above by simply doing this:
response.write(cartfields2)
But how do I find out if there's a cFeature or any other element?
View Replies
View Related
i have very strange error.i can not see some of the asp pages on my browser. when i
look from view source, all the source is there but browser does not show anything, just an empty page.
View Replies
View Related
im looking to find out how can i make, when the pointer is over a link or picture without clickin on the link an small textbox(something like that) open and show the content of that link. for example in this forum when you go over a thread you can see the content.
View Replies
View Related
I have a ASP page that when a user clicks a link it uses a DLL to stamp a .pdf with a watermark and then display the .pdf in there web browser using the Adobe Reader. This all works fine.
if a user views a pdf and then modifes it if they click the link again it still shows the old version of the file. They have to hit there refresh button to show the changes. How can I make it so my page always displays the lastest version of the PDF and not what is in the cache?
View Replies
View Related
i have a website that users log on to. On one of the pages is a form. What I want to do is only show a certain part of the form for specific users. The way i want to do this is by using their username as a 'show if' command in dreamweaver. What I currently have is this
<% If Session("MM_Username") = "union" %>
all data to be hidden shown is here
<% End If %>
But this doesnt work for me! Any suggestions on how to show this properly?
View Replies
View Related
I want to show the currency like that xxx.00. In my database, i already set the type of column which i want to show to currency. However, the currency can no be shown as my expect. It only show like that XXX..
View Replies
View Related
In one of my ASP page, I want to show the visitor's IP. Who can I do that?
View Replies
View Related
how to show popup windows (html format) and the size is depending on the size of image?
View Replies
View Related
i m displaying only 4 lines of my main news..and after that there is one link more...if user click on this link then the detail of this news will display....but problem is i want to show the rest of content of this news at same place..i maen to say after clicking more it will display my main news content in place of 4 line and more link Code:
View Replies
View Related
I have some problems with how to show error message. Now I have two asp pages such as page "A" and page "B" and When I click a button on page "A" then the process will check conditions from page "B" ,so if there're some errors it will redirect to page "A" and show error message box.
I would like to know that how to show the message box?
View Replies
View Related
where in i could show in a dropdown the database table name as i would like the whole databse be searched according to a specific table?
View Replies
View Related
I have clustered IIS 5.0. It is working on a fail-over clustered model (Active-Passive), with one node as a preferred owner and the other only as a failover. I make the changes to IIS from one node, and then synchronize it with the other node.
All of the data is stored on a shared external disk array. I have around 50 websites. All of them work fine and are accessible. Recently I have found out a confusing problem though. Code:
View Replies
View Related
I have a problem. I tried my best but could not solve is. I have a
page where user selects the folder name from a drop down list. It takes
user to show.asp page, where it how all the files in the folder and
also user can click on them and download them. If I select name of the
folder from the list, on show.asp it shows all the files and their
link.
When I click on the link then most of the file which has long
name and have space in their names wont be hyper linked. For example if
files name is Virus Control.vsd or file name is INCIDENT-ACCIDENT
INVESTIGATION REPORT.htm. If I click on them it will say "The page
cannot be found". Code:
View Replies
View Related
I have table that list some companies, when the user selects the company a form comes up that list all the company info, where they can view it and also update some info. One of the fields they update is a drop down list. I'm having trouble populating the menu with the value from the company it comes up blank. Here is the code:
View Replies
View Related
I have a problem . I have a table of field name ,roll_name, age
I have to show name and roll_number in combo box list.
<select name=id1>
<option value="<rs(0)>"><%=rs(0)%><%=rs(1)%></option>
View Replies
View Related
I have a list of requests that I'm displaying. The client wants to be able
to display the details of the FIRST request as the page loads.
Right now, as I loop through the recordset, I'm checking the querystring for
"rid", and if rid = "" then I do a response.redirect to the page adding the
rid value to the querystring from the recordset.
I'm thinking this is not very effecient, but I can't figure out anything
better.. anyone have a good solution to show the details of the first item
on the list?
View Replies
View Related
how can i make that the page show only TOP 5 record in the database ?
View Replies
View Related
I have a "booking" section on my intranet.
2 questions.
1. Can I, say by session, determine if a user logged in can amend/delete data they have entered? But no one else.
Say they book a conference room, but only they can delete it
2. I want to prevent cross bookings (in terms) of time.
View Replies
View Related