I have an existing classic asp web site running under IIS ( on localhost) I
want to start using VS 2003 to edit/debug this project. How do I go about
opening this this existing web site with VS 2003?
Has anyone had any success in editing/debuggin classic ASP in Visual Studio 2003?
We have recently received a new project from an outside contractor done in .Net 1.1 and now have VS 2003 installed. We have tried to use it to work with our legacy ASP applications but we are stumped on how to get the debugger to work. It keeps trying to "build" and errors out because it cannot find a sub main().
If you have had any luck with this please either point to a resource that will get us started or share the steps to get this going.
I'm running into some trouble figuring out how to create a 'project'
from an existing asp application.
The ASP app was written entirely with plain text editors. I would
like to set up debugging for it, but it seems that in order to debug,
I must have a 'projec
I cannot figure out how one might go about this task. The project is
rather large (180K lines, and a few hundred files in many different
sub-dirs), and I have been playing & researching for about 4 hours
now, and I can't figure it out.
Can anyone make a suggestion as to what I must do to get something
going (preferably vs2003, but I have VID also)
Using VS 2003, how can I open an existing (localhost) website so that all of the website files appear in Solution Explorer the way they do with VS 2005?
View Replies View RelatedI need to debug a COM component written in VB 6.
The .DLL is called from asp.
All runs well under Windows 2000 (I remember, I had to ad
a lot of rights to the user doing the debugging)
I just run the dll (F5) in VB, the browser opens the .asp-
page where the DLL is called and I see the request in the
VB-Debugger. Very nice!
It does not run under Windows 2003.
Any Ideas?
I tried to give the Application pool running the
application admin rights. but it does not work.
I can not find any errormessage in the event log.
I am using IIS 6.0, VB6 SP6, and Windows Server 2003. The COM are created using VB and being called by some of the ASP pages.
I was tryng to debug the COM in the VB COM project (which is already in debug mode), breakpoints are set at the specific functions. But, I found that the COM component does not jump into the COM project and thus does not stop at the breakpoints I set. FYI, the COM works fine.
Anyone know how this happen and how to solve it?
Where can one get documents on how to debug asp code?
View Replies View RelatedI am to build a site onto an ASP server. Anyone here used Dreamweaver and is it just a simple matter of opening up a new ASP page in Dreamweaver and build the site like you would normally do with a HTML page and it will handle the ASP coding accordingly and you can just simply upload it onto an ASP server and it will work?
The site I am to build is basically just a standard html website, but my friend wants me to build it for an ASP server so he has asked me to make sure it is an asp site so I am presuming with the extension .asp
If I build it as a html site to begin with, will converting it to asp be hard. Could I just export my pages into asp or is there more to it?
Can a Html website be loaded and working on an asp server or host?
Is it possible to have a site mixed both html and asp, eg. the home page is html and when you click on shopping cart on the home page it goes to a hopping cart page thats .asp or do they all have to have the same extension.
I want to know what's the best way to debug ASP pages? Now, I just put the
following code when I got run-time error, but sounds like not efficient.
I typically use a VB com component for handling business logic and data processing in my ASP projects.
In the past, if I wanted to get a forms contents into my VB layer I would simply pass it in the call and accept it in VB as a string which I could put into an xmldom object.
I am now experimenting with passing the entire form along as a form object (to be accessed as such in VB as a ASPTypeLibrary.Request type.
I have found two ways to do this.
1. pass the form as above using the listed request type in VB. This works great.
2. Dim up a ASPTypeLibrary.Request object in VB and assign it
GetObjectContext.Item("Request").
Using GetObjectContext is much more difficult to implement if you want to have debugging ability in VB (there are numerous security considerations).
My question is (and thank you for reading this far), do any of you know what the best practices is for a production environment? Can anyone think of any reason why I shouldnt just use the easy method (pass the form and define its type in the argument list for the sub or function)?
How to do debug in visual studio a connection that comes in from a url
referral?
I cannot get visual studio to "boot" on the referral. IIS just runs the ASP
directly.
I've found that, when debugging scripts on my computer, IE will give me an Error 500 message if something is wrong with the script, whereas IE on my co-worker's actually prints the line and points at the exact character that's amiss, and says what kind of error it is.
This is incredibly useful for someone who is learning like me, but we can't figure out how to make mine work that way (it's the same version on the same OS and everything).
I built an MTA which is used from an ASA and ASP pages. The MTA was
developed in VC++ 6.0.How would I go about debugging into the C++ code?
when i try to debug/run the SQL statement in TOAD, it come out with the error "insufficient privileges". below is my sql statement :
INSERT INTO INST_REC(IID,SN,AN,BID,MANF,MDL,INST,AREA,SYS,STN, SID,ST,CF,OPT,PO_NO,UC,SPL,BV,RQS,RMK)
VALUES ('huiy','uiu','ui','uy','uiy','iyiu','yi','yi','yi ','y','y','A','i','i','utytu','4646','rty','797',' tyf','hfgh')
I need to debug the code and get the value of variables in an asp 3.0 page
where the javascript is being processed on the server side (i.e. within <%
%. I can use Response.Write("window.alert(".etc")"); for text messages to
tell me where i am in the code, but I cannot seem to figure out how to
display values of the variables...
I just got the programming down for a new site i've been working on. I am curious if anyone out there wants to just browse through the site as a normal customer and tell me if they recieve any errors or problems.. Any suggestions, or critiquing remarks would be helpful. The more people the better! I greatly apprecaite everyone's time.
The url is: http://www.corsican.com/test/
The Login is: test
the Password is: test
What's a good tool to use for debugging ASP pages which contain bunch of javascripts?
View Replies View RelatedI have an asp pages which uses ActibeX dll and Exe written in in VB and VC++. I want to debug the components from asp page. When the asp page is run I should be able to get the breakpoint in my VB & VC++ dll and exe.
what could be the setting to do that. I can debug those componnets from another VB/VC++ applications but I want to debug from asp page.
I have to pass form data from my site to another organizations site using POST method... how exactly do I do that? Im familiar with how to do it within a single site/domain, and cant use querystring... I dont know where to begin.
View Replies View RelatedWhenever I do a site that is mostly static but with some semi-dynamic
sections, I've struggled to find a good site search solution without
paying for a hosted search service.
I like the FSO-based search engines, but they fail to pick up on some of
the dynamic part.
I was just creating a Google sitemap and it made me wonder: has anyone
created or seen a script that uses the XML Google sitemap to power a
search engine for your own site?
Seems like if you were keeping it updated for Google, why not use it for
your own site?
IIS5, on a Windows 2000 Server machine. Debeg.WriteLine "Hello, world!" How can i view it?
View Replies View RelatedIs it possible to change the web.config or machine.config file to allow access to an .asp page? I'm new to .Net 2.0.
View Replies View RelatedI am running an ASP application from within VS .NET 2003. When I run, the files are put in readonly mode, even thought its only an ASP page. Is there a way to edit the ASP (not ASP.NET) page (not in the middle of debugging ofcourse) without quitting debug mode
View Replies View RelatedWe have a development iis6.0 server. Multiple programmers are developing independent applications. Non are sitting on the machine they all develop on their own system. Regularly they try to debug and receive the following error.
Error while trying to run project: Unable to start debugging on the web server. A ebugger is already attached. Would you like to disable future attempts to debug ASP.NET pages for this project?Does this mean each developer must run IIS on their own computer?
Anyone have any insights on how to debug a memory leak with a classic asp application?
View Replies View Relatedwhat is the best IDE/tool to code and debug asp and asp.net scrips?
View Replies View RelatedI am having a problem which thus far only seems to be fixed when I refresh the page. The basic process is as folllows:
1. Select details from the DB and display on screen.
2. Click a link 'Generate Docs'.
3. This then goes to a page which first selects from the DB using information passed through the URL from the above link to identify the correct records. We then create a PDF file based on the data from the DB and display the link to the newly created PDF. The problem, is that at step 3 the PDF does not get generated on the first pass, only if you click the refresh button on the browser.
I have checked all the obvious items, ensuring variables are assigned correctly and called correctly, I have tried implementing a number of 'must revalidate' style tags in both ASP and HTML, I have checked through all of the queries to ensure they are being processed and the data is returned on the first pass and they are and nothing thus far has worked.
i try to debug a simple ASP.NET project on a windows server2003 and i
receive a msg that saya's i dont have permissions and to check if i am in a
debugger group.
I following the IIS (version 6.0) with the "Manage your server" from the
administrative tools. i did the following:
1. make sure that the machine debug manager service running
2. the digest authentication is unCheck
3. add the IUSR_ to the debugger group in the AD (the computer is a domain
controller)
4. i gave the user a full control over the wwwroot library
i really dont know what else to check.
I'm trying to figure out how to debug a very simple COM object I developed
in VB. I'm very new to VB and ASP so I have a lot to learn.
That said, I found what I thought was perfect article which covers this:
http://support.microsoft.com/defaul...;en-us;299633#2
However, I'm running on Windows 2003 and at step 4c) I don't have an
"Internet Service Manager" but rather "Internet Information Services (IIS)
Manager". OK, fine, I assume the name changed. Code:
i have searched through a ton of past posts in an effort to find the
answer to my problem but so far have come up with nothing.
The problem I am experiencing is with VS6, visual interdev on windows
2000, with IIS.
When ever i attempt to debug my asp web app the debugger will step into
the code and will start an Iexplore.exe process, but not actually make
internet explorer visible.
Does anyone know any way round this I have spent loads of time trying
to sort it already.
using Access, i'm trying to input form info into a database.
below is the part of the code that's giving me problems:
' Creating Connection Object and opening the database
Set con = Server.CreateObject("ADODB.Connection")
con.Open data_source
con.Execute sql_insert
i get this error whenever i submit the form:
Microsoft JET Database Engine error '80004005'
Operation must use an updateable query.
Before I was able to use Microsoft Devleopment Environment to debug my asp code. I did that by going to Microsoft Development Environment 6.0, go to Debug menu -> Processes, and will see inetinfo.exe and then I can attach it. But lately, (and I don't know if it's got anything to do with the fact that I have recently installed Norton Internet Security and Norton Anti Virus) when I opened the Processes window, the list is blank, and the Machine drop down is also empty.
If I hit Properties or Refresh, I'll get the "Development Environment has encountered a problem and needs to close. We are sorry for the inconvenience" error, and the app will close. If I hit the Machine button, even if I find the machine, it'll say "Unable to connect to the machine". Has anyone had similar problems before?
i have 2 tables and i want the content of the one table where the second tables content doenst exist in the other table.
E.g.
Table 1
id1
1
2
3
4
Table 2
id1
1
4
so i would only get 2 and 3 in table 1.