How To Email A Private Message
When I try to email a private message to someone who responded to my posting it tells me that i don't have priviledge. I am registered but don't understand why I cannot email a private message to anyone.
View Replies
ADVERTISEMENT
Send An Email With CDO.Message
i've a problem sending an email with IIS 5.1 (win xp pro). I was used to use deprecated CreateObject("CDONTS.NewMail") but i got an error. So i tried with Server.CreateObject("CDO.Message") and i got no errors, but i didn't receive any mail. I found some mail created in mailroot's subfolders. How can i solve?
View Replies View RelatedCDO.Message Email CC List Problems
I am trying to send an email from some server side ASP code and the CC field
is giving me some problems.
The code works fine if I have one or 2 email addresses in the field (The
addresses are valid.) However if I have 4 it breaks. Now the good
part......If I copy the 4 addresses (that were causing the problem) into the
field a few times, so basically I have 16 addresses the code works!!
I don't get an error back from the code when it breaks and I don't see any
emails in the Bad Email, Pickup or Queue folders, the email just doesn't
sent at all.
Also if I put the 4 addresses into the BCC field it works fine. It only
breaks on the CC field....
Email Link In Message Through Msgbox
I am trying to include an email link in the message displayed through a msgbox function. How can I do that? or can I?
View Replies View RelatedAuto Send Email To AOL User With CDO Message
Code:
Set cdoMessage = Server.CreateObject("CDO.Message")
Set cdoMessage.Configuration = cdoConfig
cdoMessage.From = "admin@nyc-discusfanatics.com"
cdoMessage.To = strEmail
cdoMessage.Subject = "NYC-Discusfanatics.com User Registration"
cdoMessage.HTMLBody = "<html>" &_
"<body>" &_
"Hello "&strUName&"<br/><br/>" &_
"Thank you for registrating with NYC-DiscusFanatics.com Please activate your account by clicking the link below.<br/><br/>" &_
"<a href='http://www.nyc-discusfanatics.com/face/dragonball/AccountActivate.asp?UserID="&strID&"'>Activate my account.</a>" &_
"<br/><br/>Thanks for your registration." &_
"<br/><br/><br/>Vincent" &_
"<br/><br/>Administrator of NYC-Discusfanatics.com" &_
"</body>" &_
"</html>"
cdoMessage.Send
Set cdoMessage = Nothing
Set cdoConfig = Nothing
I got return email that the mail fail to deliever to AOL user. I assuming AOL email doesn't accept ASP script embedded in the email?
SCH Reference In A CDOSYS Email Message Script
I'm just looking into modifying a script for an asp page and I've come across this code.
sch = "http://schemas.microsoft.com/cdo/configuration/"
Set cdoConfig = Server.CreateObject("CDO.Configuration")
With cdoConfig.Fields
.Item(sch & "sendusing") = 1
.Item(sch & "smtpserverpickupdirectory") = "c:InetpubmailrootPickup"
.update
End With
Set cdoMessage = Server.CreateObject("CDO.Message")
Could someone please explain to me what the sch reference is for and if I need it.
I'm going to create an E-mail message and use CDOSYS to send it. I think it's necessary to understand what's going on before I continue....
Can I Retrieve Sender Email Address For CDO Message ?
I have an ASP script for users to replying by email to job postings. I set
up the message using CDO as usual:
Set objMessage = CreateObject("CDO.Message")
objMessage.Subject = "Example CDO Message"
objMessage.From = "blah"
objMessage.To = "myemail@comcast.net"
objMessage.TextBody = "blah"
objMessage.Send
I did not realize that objMessage.From needs to be filled in, and that
there is no vlaidation. Suppose that's how spammers work their magic.
Is there a way to determine the user's email account so I can fill in
objMessage.From ? I am thinking No, that a server app can not strip
something off a user's PC memory. Otherwise I will have to set
objMessage.From to a generic term.
Using CDONTS To Send Japanese (UTF-8) Email Message
I'm having no luck sending an email message from an asp page with UTF-8 encoding so that Japanese characters can be correctly rendered.
View Replies View RelatedCDONTS Text Based Email Message Not Working
I'm trying to send email through a form I created and everything works except the email portion. It's not sending the text message. Code:
View Replies View RelatedPrivate Subroutines
In ASP, if I define a subroutine as private
Private Sub mySubroutine(arg1, arg2)
I understand that the variables I define inside the subroutine are local only to the
subroutine. If the same variable is defined outside the subroutine, it won't conflict
(right?) What about variables that are defined outside the subroutine, but not inside? Are they available inside the subroutine?
PM (Private Messaging System)
I am trying to create a Private Messaging system for my Simple log in system, I am making forums my self, but i am not sure how to put a private messaging system in, could some one please give me the script plz?
View Replies View RelatedRedirect To Private Server
What is the "right" way to redirect to an internal server from the outside? In other words, users can connect to my website and then I need to be able to redirect users with the correct login to a server with an internal address (10.x.x.x). Obviously I can easily redirect them with the address, but the idea is to protect the internal address from the outside.
I tried linking from the public site to a script page that simply redirects to the internal address, but the internal address still appears in the address bar and I don't know how to map it to a name without every user needing a host file entry. Anyone know of a way to do this? Basically the purpose of this is to allow external users to connect to an internal server to view proprietary data.
Viewing Database In Private
how to view my database without making it a webpage for everyone to see. I would like to create a form and intake client name and phone number but I don't want the information available to the publicc to view. Is this possible. I use frontpage2002, windows millenium, and asp and frontpage extensions.
View Replies View RelatedIssue With Private Functions
I just tried a test comparing a Function to a Private Function with this code:
<%
Option Explicit
dim X1
X1 = 9
Private Function RealTest(here)
RealTest = here + X1
End Function
Response.Write "The answer is " & RealTest(10)
%>
I get "The answer is 19". If the function is defined as private, shouldn't I have gotten
an error in the function that states that X1 is undefined?
Difference Between Private And Public Function
What's the difference between a private function and a public function?
What's the difference between a function and a sub-routine?
How Do You Insert A Message In The Body Of A "<a Href="mailto:" Email..
Hey there, I have a few links in my site similar to this one.
<a href="mailto:contactus@timber.com?Subject=Contact%20Us">
When a site visiter clicks on to this link, it starts up your default browser.
Anyone know how to insert a message in the body of the email?
Something like...
Memory Leak? Private Bytes/Virtual Bytes
As I ran in to errors like "Ran out of memory" and "Out of memory" I
supposed my website might have memoryleaks. To trace a potential memory leak
I isolated the IIS process and monitored the 'Virtual Bytes' and 'Private
Bytes' for a while.
I noticed the private bytes stays 'low' all the time. Sometimes a bit up,
sometimes a bit down. Virtual bytes also follows the same pattern for most
times. But, sometimes it increases to almost 2gb en stays there.
I've been reading for memory leaks an aggressive caching and stuff and was
wondering when there is a memory leak. In short: what does it mean thet the
amount of virtual bytes stays high? Is this probably due to caching or....?
Difference Between Private Function And Public Function?
What's the difference between private and public functions in ASP? When should I use either?
Email Validation Of Email Address Within An Access Database
Im running a simple mail system program which emails newsletters to a database list of 3000+ users.
The program loops through a database containing the emails and sends them out using ASPEmail.
My question is, is there some way i can validate each email address so that if there are invalid characters e.g. the space in "blah @blah.com"
it will skip the record and continue the loop.
At the moment i have a working program however, whenever the program comes across an invalid email address it stops at that record and prevents the program from emailing any further.
CDONTs - Problem Formatting An Email, From Form To Email
I am having a problem formatting an email message which comes from a form.
I am currently having difficulty with the <br> tag which I am using for line spaces within my email. I am getting an expected statement error message which is pointing to the line which is underlined below. I can't think what is causing this.
The code for my processing page is below:-
Generating Email Address And Textarea To Be Inlcluded On Email
1. I want users to type in their email address on a textfield, and after users press the "Submit" button. The info will automatically go to another person's email to receive a compliment, suggestion, etcetera.
2. Another is how to include the message written on a textarea of a form with the ASP code supplied below: Code:
Asp Email Verification Check Valid Email Thru Mx Record
how to write to check verification valid email thru nslookup or mx record or dns record. Is it possible to do that. Is there any tutorial from sitepoint, previously found it but i lost the link.
example to check assume test@domain.com is not a real email, abc@domain.com is real email
how do u check it.
Cdonts Email Script Won't Send Email
i used the following script but it won't send the email. any suggestions why?
<%
Dim TBdy
Dim MyCDO
CR = Chr(13)
Set MyCDO = Server.CreateObject("CDONTS.NewMail")
MyCDO.From = "person@something.org"
MyCDO.To = "allstar@aol.com"
MyCDO.Subject = "collegebound info"
TBdy = Request.Form("cb_name")
MyCDO.Body = TBdy
MyCDO.Importance = 1 (Normal)
MyCDO.Send
Set MyCDO = nothing
%>
Email Form - Verify Email Address
Just starting to play with scripts, and need a little guidance. I want to check to make sure that the email addresses users enter in a form are identical before it will allow them to submit. here's what i have:
the variable for the second email address is EmailFrom2
'validation
Dim validationOK
validationOK=true
If (Trim(EmailFrom)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("emailerror.htm?" & EmailFrom)
If (Trim(Name)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("nameerror.htm?")
If (Trim(CityState)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("citystateerror.htm?")
If (Trim(SchoolName)="") Then validationOK=false
If (validationOK=false) Then Response.Redirect("schoolnameerror.htm?")
ASP Email Form: Sends To Some Email Addresses But Not Others..
here is the script i use:
Set myMail=server.CreateObject("CDO.Message")
myMail.Subject="subject"
myMail.From="me"
myMail.To=request.form("email")
myMail.TextBody="hello"
myMail.Send
set myMail=nothing
this script sends emails to some addresses but not others--and its based on the email service it's sending to. for instance, hotmail email addresses get the email, but mail.com email addresses dont get the email. i have tried sending it to other email hosts, too, and still, some work, some don't. what is going on here?
CDO.Message
I'm using CDO.Message to send emails and i'm using the .CreateMHTMLBody to send an html page, the only problem that i have is that when you view the email, you notice all the images that are in that page as attachments !!!! the email loads fine, but is there a way not to show the images in the attachments line
View Replies View RelatedCDO.Message
I have a asp page that sends a excel price list to customers, this worked
fine untill now, but now when i sent one to myself it arrives as a dat file.
Does any one know why, and how to fix it, is it a problem with my emailk
reader (Outlook) or is it some thing to do wih Exchange?
CDO Message
I am using CDO Message to send mail from ASP page. I find that all the mails sent goes to bulk folder or appear as spam message in both yahoo and gmail. How can i prevent that.
View Replies View RelatedMessage Box
Is There a Message Box in Active Server Script like in
Visual Basic?
The four books I have show it the same as VB but I get a
Message "Permission Denied"
MsgBox "Message"
Message Box
does anyone knoe how to make a message box in asp vbscipt??
I am using
msgbox hello
or
msbox "hello"
to try and get a message but i get the error:
Error Type:
Microsoft VBScript runtime (0x800A0046)
Permission denied: 'msgbox'
change.asp, line 17
Message Box
When I load this script it says, �No record found�. This message suppose to display when I put something in search box and there is no record that matches in database. Everything else works fine. How can I get read of �no record found� message when I load page Code:
View Replies View RelatedCDO.Message
I am using CDO.Message object with code below. When I execute the .Send command, I get the following error.
Error: -2147220973
Description: The transport failed to connect to the server.
Note: The SMTP Server and the IIS Server are the same machine.
Anyone come across this error message in the past? This error also occurs when I use Method #1 where I use the schema reference provided by Microsoft. Here is the code:
CDO.Message
I've created a form that e-mails the response to a person. Problem is that I want to include their name in the From attribute. Unfortunatly, the .From doesn't like spaces between strings. Are there any suggestions how to fix this? Code:
View Replies View Related