How To Open A Popup Window Select A Value And Send It Back To Page?
I'm need to open a popup window from an asp page that calculates a value. This value must be returned to the input box on the asp page. I have managed to get the popup window to open and display a value so far but I am not getting the value back into the asp page.
Popup Window code...
View Replies
ADVERTISEMENT
I want when an website opens then a popup window made in flash should be open automatically in a new window. How it is possible?
View Replies
View Related
I have an ASP page that goes from part to part based off of a session variable. Is there any way to check for when the user clicks back so that I can change the variable. If not I will have to separate all of the pages out and that is just not fun.
So, when the user clicks back, the session variable gets changed. That is what I am looking for.
P.S. Is there a faster way to check if a variable is blank other than an
If Bleh="" Then
<some code>
End If
P.P.S. When a submit button is clicked, I want to open a new window with a message like "Be sure to fill out this on page X"
View Replies
View Related
I have 3 asp pages.
A link in the first one creates a popup window.
A link in the popup window opens a page with 2 frames in it, top and bottom.
Now, I have a link in bottom frame of this page, which, when clicked , should give focus to the existing popup window.
When creating the popup window, I used a reference to it like...
View Replies
View Related
When I use this command in a webpage
Response.Write "<a
href=""javascript:window.open('events/EventDetails.asp?EventID=" &
theEventID & "' )"">" & theLinkText & "</a>"
I get the new window to open but it also affects the "host" window. The "host" window is left with the word "[object]" in it. If I refresh the window that says [object] the new window opens again. Why and how can I make the new window open without affecting the previous one?
View Replies
View Related
How can I redirect to a page when I click the window back button. I think javascript will do. But I will embed it to my php script.
View Replies
View Related
1. I have a form, with a textbox and a button. I have to enter a value in the text box and then i have to click the button, which opens a popup window. Here i want to pass the value of the text box which is entered in the parent window to popup window.
I have to use that value in the popup window's form_load event in the Code behind, and i have to take the values from the database using the value which i have entered in the parent window. Code:
View Replies
View Related
I have a html form which allows the user to select add, delete, update or view from a drop down list. Their choice is sent to an asp page.
My problem is how to send them back a form from the asp page depending on their choice and send the resulting input to the same asp page again for processing.
So if they choose 'add' from the html page then that is sent to the asp page and they are sent back another form, to fill out the new record details which is in turn resubmitted to the same asp page to carry out the 'Insert' statement.
View Replies
View Related
im tryin to secure my application. i want the application to send the user back to the login page if they have not logged into the system. do i use the global.asa file or is there a simpler way to do this?
View Replies
View Related
I'am not familiar wit ASP but I have to maintain an application. In a window there are some text selection fields and a search button. If you press on the search button record list is build according to what is filled in the selection fields. You can select a record and then a detailed window is shown or in another occasion a popup window is shown.
The request is now if the opened window or popup window is closed, then the opener window has to be opened with the same content (content selection fields + record list) as it was before the window or popup is opened.
Now I thought that I have read that every window which is opened gets an ID and that it is possible to call up that window by the ID from the cache again. Is that right? And if so? Or has somebody a better idea. Code:
View Replies
View Related
Is it possible to post the form data and open the page as a modal window?
Because when I do the following, it will open page2.asp in a new window, but
I still able to manipulate page1.asp. I want to make page2.asp as modal
window.
<form action="http://server2/page2.asp" method="post" target="_blank">
Any ideas?
View Replies
View Related
I have a website which has a popup window (this only opens when the user chooses to open it). In the popup window I have a <select> control which lists a selection of "classes". Each class has a description and a class_id (stored in the value attribute of each option). The user will then select a class from the drop-down list.
What I want to do is have a control in the parent browser window which can store the class_id and the description that the user has selected in the popup window.
what control I should use in the parent window and more importantly how I get the value from the popup window (this must be client side code as the user will have entered other values into the form in the parent browser window)?
View Replies
View Related
I am facing a problem in asp pages. I am requesting some values from a page and moving to another page from the second page.
i m opening an popup window and for refreshing econd page from that Popup. i m using code.window.opener.location.href='second window name') in doing this I am losing the values of the first form. which i have to insert in the dbase in the Third page
View Replies
View Related
In an asp page I have the following scenario happening (or would like
to happen)
person picks a menu item in main page which opens a popup window that
allows customization of that menu item. Upon submitting that page the
results go to a second page in the popup window for collection into
variables.
I was hoping to just close that second page, but
everything I have tried results in a message window stating the
program is trying to close the page (y or n). I was hoping to get rid
of this, but can't seem to no matter how hard I try.
There are many examples on here that seem rather old and may have
worked with former versions of IE without problem, but none have
worked how I wanted.
Does anyone have suggestions on how I could get the above...or even
modify things so that maybe the original popup window can be
closed...I do wonder if its the fact that a second page has been
opened in the popup window.
View Replies
View Related
i am linking the text to a new fresh page by a popup. however, when i take away the <a></a> tag, when i move myu mouse over, it does not have the effect. but when i set the href to --> href="#", it pop out 2 windows. How can i solved the prob? I just need to link the text to a new fresh pop out when on click.
function popup(url)
{
newwindow=window.open(url,'name','resizable=yes,sc rollbars=yes');
if (window.focus) {newwindow.focus()}
return false;
}
<a href="#" onClick="popup('search_coyfrm.asp')">Search Company</a>
View Replies
View Related
The following code is not working properly in IE6 but it does work for mozilla firefox. I am trying to open a new popup window without affecting the frame from "where" it came. But what happens when I click on the link is that the popup window is displayed correctly but the frame then changes to my default.htm. It is supposed to stay the same
here is my code
Response.Write "<td><a href=" & """" & """" & " onclick=" & """" &
"javascript:window.open('desc.asp?msg=" & tempdesc & "','" & rownum &
"','toolbar=no,location=no,directories=no,status=no ,menubar=no,scrollbars=yes,resizable=no,width=600, height=600,left=300,top=300')"
& """" & ">" & left(tempdesc,50) & "....</a></td>"
View Replies
View Related
I have a popup window that is used to display text from a database. Some times it can be a few words, sometimes it can be a hundred words. What I would like to do is resize the popup window to fit the text. Well actually it is just the height that needs to be resized. I have set the width to 600. I have put the text in a table and I was thinking
I could set the height of the window to be the height of the table plus some for room. I don't know if that is possible.
At first I tried to count the number of lines and multiple by a factor by that doesn't work so nicely because I was getting the number of lines by dividing the number of charaters by the maximum number of characters in a line.
View Replies
View Related
Does anyone know how to post form data to a popup window either by using ASP or JavaScript? I have a form full of inputs and I want to open a popup window where the processing can take place.
View Replies
View Related
I have a main window which shows all records from a table. When a user clicks on "Edit" for a record, a popup showing information of the selected record is displayed.
The user then changes the information on the popup and clicks "OK" button which calls an ASP page to update that record in the table. Everything works with no problem up to this stage.
My problem start after the update process. I need to know how to close the popup and then refresh the main window showing the updated information....
View Replies
View Related
I have a child window that has a button to close it. I would like the parent window to be refreshed (since action taken in the child would change the values in the parent). The code I have works, but I get that "Retry" popup... I would like to bypass that. Any suggestions? Code:
View Replies
View Related
I am designing a website to records details of people who visit our company. When entering a visitors details I wish to record the company that they work for, to save the user time a dropdown list of companies is populated dynamically from the backend (Oracle) database. In the event of a company not existing in the database the user would have to go to the page to add a new company and then come back to the form meaning that they would lose anything they have already entered.
What I am trying to do is to enable the user to click on a link which will bring up a pop up window into which they may enter the new company, on closing down this popup the new company will be added to the dropdown list.
So far I have got the popup to display and to accept the user input and I have inserted this new company name into the database with a unique reference number generated by a sequence and before_update trigger. The following code is for the popup window and accepts user input, writes it to the database and closes the window: Code:
View Replies
View Related
I am using asp to do form processing. When the form is submitted I want to open a popup window and have the form processed. at the conclusion of the processing I want to diaplay a thank you message and have the user stay within the popup window until they close it all the while my main page is still visible beneath the popup window.
What is happeing is that the from action script is opened in a new browser window and it does not function the way I want it to.
Code is as follows: ......
View Replies
View Related
I've been writing web pages that pops up smaller windows when links are
clicked. I noticed that very often after the small window is poped up, the
mouse pointer remains busy instead of returning to the normal pointer.
Does anyone seen this problem before and know how to resolve it?
Code I use is like this:
function viewproductdetail(sku)
{
g =
open(page,'g','status=no,toolbar=no,menubar=no,hei ght=550,width=500,scrollba
rs=yes');
g.focus();
}
View Replies
View Related
I would like to open a new window (Function is called NewWindow and is writtent in VBscript) when a user submits a form. All the samples I found on the web indicate something like the following: Code:
View Replies
View Related
how can i open a new window with a if statment but still getting variables values?
tit=Request("title")
if x=1 then
something
else
Response.Redirect("<A href="http://www.test.com/lookup?q="&tit">http://www.test.com/lookup?q="&tit")
end if
I donīt mind using java, but i donīt know how
View Replies
View Related
I am working on a website and have a couple links that open up a new window. My webpage is .ASP as well as the windows I am opening. Currently the link open into a new window. However, I would like to be able to set the the size of the window that is opened.
This is the code I am currently using:
<p><a href="Search/search_owner1_form.asp" target="reportWindow" class="style2">OWNER 1</a></p>
View Replies
View Related
I have an the following asp. How to have this asp to open in another
window when it is called?
<% something %>
View Replies
View Related
I have a submit button that a form uses to submit the contents of that form to another page.
<input type="submit" class="input" onclick="this.form.action='checkname.asp';">
Is there any way to open a new window and perform the action in the onclick event?
View Replies
View Related
Is there any way to keep a window on top using window.open? I can't use a modal or window.focus onload b/c I have to get inputs
View Replies
View Related
I have an .Net project that has an ASP page, that has links. When a user clicks on one of the hyperlinks, it opens an Excel page, in IE. One of the cells in the Excel Workbook contains a link to a PDF document.
If the user clicks on the PDF link, it's opened in the current page. I'd like to know if it's possible to open the PDF in a new page. So it would basically be opening a PDF from the Excel document - that is opened in IE. Code:
View Replies
View Related
I have searched the web and books but so far I am drawing a big fat nada on this one.
I want to open a new window from an ASP page and everything I have found suggests to use JavaScript and not the server side VBScript. The problem is that the server side is what will decide were to send the user. Is there a way to exit or open a new window using JavaScript passing in variables fromVBScript server side then close the ASP page?
View Replies
View Related
the new window will be in the SAME session as the opening window.I don't want to abandon the session of the opening window, just have a new one for the new window.
View Replies
View Related
I wish to open a window with this command
Window.OPen(meat/ServerLookup/ServerWindows.asp?ServerName=VarServerName)
It does not seem that the Window.Open can handle the ?ServerName=VarServerName part of the command? DO I need to add stuff to make this work like I want?
I had thought of using a session variable to pass the variable VarServerName to the next page ... but in this case using the ? function would be FAR more convenient... Any Ideas on how to make this work?
View Replies
View Related