I'm not sure exactly what happened but my local development server will no
longer serve ASP pages. I can request HTML and they are served up fine.
When I ask for an ASP I get the generic 500 error. The web log files show
nothing more than the 500. I'm used to looking and finding the line in the
page that the error occurred on as well as the actual ASP error and the
description.
I looked at my System log and I noticed that there are two events being
logged by W3SVC that might have something to do with it. The first is Event
47 and the message logged with it is "The server certificate for instance '3'
does not chain up to a trusted root certificate. ". Then immediately
following is an Event 36 and the message says "The server failed to load
application '/LM/W3SVC/3/Root'. The error was 'General access denied error
'. "
This problem seems to have started since I installed "Security Update for
Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB886903)" and
"Microsoft .NET Framework 1.1 Service Pack 1" on Monday.
I'm trying to view ASP pages Ive created on my Win XP Pro computer. Every time I try to open an ASP page I get the error shown below. I can avoid the problem by changing the application mappings for ASP files from aspnet_isapi.dll to asp.dll. However, this seems to be a bit of a workaround and doesnt explain why the problem happens in the first place.
Just bought Build Your Own ASP.NET Website Using C# and VB.NET
Been programming for almost 5 years in VB/.NET and just getting into the ASP side.
I'm stuck with the crazy error:
Server Application Unavailable The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
I followed the book step by step up to page 28, but it just assumes the reader wont get the error I just gave. Do I need a better book?
i have a working members registration script where members register and it emails confirmation of their registration details to the email address they enter. what i would then like it to do is add them to the users database. I have the code but it chucks up this error when it tries to add the user:
Microsoft OLE DB Provider for ODBC Drivers- Error '80040e10'
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
I have been running IIS on Windows 2000 for several years with no problem.
Today, when I clicked on the system tray icon and clicked start service, nothing happened - no error messages. IIS just ignored me completely and would not start.
I am about to try a computer restart - but has anyone else run into this problem?
Seems that my XP Pro IIS is being a jackass. When I run my ASP scripts it seems to give me this wierd error. Big_Al told me that it was because my script is inside a read-only folder and that something along the lines is really messing it all up.
Now this had brought a new problem. I changed the IIS Console features to Read, Write etc. but its not changing the wwwroot nor the sub folders. Whenever I un select read-only it simply reactivates itself ! What do I do to make the damned thing change!?!?!
We just upgraded our web servers to ms2003 and iis 6.0. we are also running coldfusion MX7. I get a 404 error when ever I trry to bring up an asp page. On the old server we' re we have both cf and asp pages running w/o issue. Any ideas why I'm getting 404's form my asp pages.
i have made a script and it worls no the local host on my pc but does not work on the server.all of my other asp scripts on the server work any ideas y this would work on the local server and not on the internet?
I created my .asp page in Microsoft Visual Studio .NET 2003 and when I right-click my page in there it displays perfectly. But when I try to view it in internet explorer I only get the html part to display.
I've tried regestering iis in the cmd, it didnt solve it. Here is the code if it could be to any interest:
Ive build an asp website which works on my local machine and also works when i upload it to other web spaces, but when i upload to one web hosting space - it doesnt (which also happens to be where the client wants it to be).
There are other asp sites running from that location too - which just puzzles me. Would it be something to do with that i use dsn less connections and the other ones use dsn?
I have been working with ASP classic on this current project im involved in. Well the problem im facing now is there is a page where a flash movie should play in a particular section on the page but it wont play on the secure pages, on the unsecure pages it plays fine. I had added an Active X work in accordance with the Lawsuit issue but it still wont play. Has any body faced this problem.
I am trying to have multiple layers on a page that toggle on and off, it works on a htm file but when I use it as an asp file it doesnt show anything. Code:
Having trouble getting Session to persist. Have checked properties of the Virtual Directory in IIS4 manager and "Enable Session State" is checked, with time out set to 20 Mins. Have also checked the Project Properties in Interdev 6.0 and confirmed that "Sensionless ASP Pages" is NOT checked.
When moving from one page to another within the application it starts a new session for each page : I've confirmed this both by Writing the SessionID and by adding a Variable into the On_Start of the Global.asa. Only trying to store a single digit in a Session variable.
I have a couple fields in an Access DB that have parenthesis in the name:
EST(Minutes), EST(Seconds)
When I try and populate the dataset and then bind the datagrid it claims there is no field having that name. Can parenthesis be used in fieldnames. If so, can you please tell me the correct syntax please.
I have been working with ASP classic on this current project im involved in. Well the problem im facing now is there is a page where a flash movie should play in a particular section on the page but it wont play on the secure pages, on the unsecure pages it plays fine. I had added an Active X work in accordance with the Lawsuit issue but it still wont play.
I created a feedback form for my website that has only 2 required fields. When you submit the form it calls my asp page which puts the information in a database and then sends me n email with the information that was entered into the form. The problem is that the form only has two required fileds, and if the remaining non required fields are left empty when the asp page is called it does write to the data base, but does not send me any email. However if I go back in and put somethng in every field in the form then when I submit the form and my asp page is called it writes to the data base and sends me an email with the all the information I entered in the feedback form. Is there a way to tell my asp page that it is ok to send the email even if the non required fields are left empty? I really do not want to have to go back through the form and put default values in for each area of the form? Also is there a way to have an error displayed if the email is not sent? My asp code is below....
I have a table having 3 columns. There is a checkbox for each line. I need to get those lines whose checkboxes are checked, and show those lines to another webpage. Is there any way to do that? My concern is that all information in the table are in <tb></tb> pairs without any name tag. Any idea?
I'm doing a content management system, whereby the user can enter the HTML code for a currency symbol, eg £ for £.y . when I bring this data backup, say they want to edit the settings, then my ASP/HTML page is rendering the HTML code, eg £, rather than showing the original value, eg £.
If for example I put a space between the '&' and the 'pound;', eg & pound; then this will cause me problems because the user will think that they have to a put a space in or they file it with the space, which means the HTML code won't work any more. Is there a way round this?
i need to include the html inside another html, though it might appear simple, the catch is this, my one html is in one server and my another html is in another server.I cannot read the html and stream it as it has images and their path gets changed when i do that.
More over i donot have any control over the html which i am going to include all i have is a url http:abcxx.htm whose content i want to show in another asp page. The technology is ASP (vbscript and javascript).
I've created a form, using ASP to pull through first and last names from a database into another database. I cannot get it to put a space between the names it pulls through!!! Can anyone suggest what a put between the two to get a space!!
I have an asp file that I made and I want to have it when you come to my site, the index.html redirects you to the .asp file, what is the code to do this?
ASP is server-side technology.All it does is process data sent from a client in a Request and generate html to be sent to the client via Response. You'll probably get a quicker response by posting to a relevant newsgroup. http://groups.google.com/groups/dir?sel=33584039
What is the difference between HTML and ASP? Apart from this,i know that ASP can display data from the text file of the server.Can HTML do such thing too?
I need to make a javascript include file using asp. I know how to make the include file with a .asp extention, but I am haveing other truobles How can I make the < in html code be displayed as < not hidden and executed as normal code? Ex. <body><font color="red">this is text</font></body> would be displayed as that not this is text (but colored red). There's some function... ...can't think of it... ...I kind of does replace(pghtml,">",">"), etc... since I am getting the data from a database, I need it ALL to go on one line when I response.write it, how would I do this?
I have an index.asp which consists of frameset and frames. The sub-frames also consists of frameset and frames. This way, I can set the layout of my webpages.
In one of the frames, I load Login.asp. When it is submitted to doLogin.asp, I validate the login information. When I validate the password successfully, I want the whole webpage (the index.asp and down) to reload because it has to re-draw the menus on top. When the login is failed, it redirects to Login.asp.
I am having a hard time doing this from my ASP page right after I validate the login information.
If this is the wrong group, please post a more relevant group. My problem is that I have a .hex file (basically a text file) shown on a web page for download. If one left clicks on the link for this file, the text content is displayed. Someone in my organization wants to prevent this display. Any ideas on how to do this? I hope this is not an ignorant question but I am not a web developer, ... yet.
I have to pass the valut of an HTML text box through POST method but for some reason i m unable to get that value through Response.Form of asp I have to get the value by response.querystring but for that i need to send that value through parameter in URL i dont know how to pass that value of textbox through parameter by post method.
