I have sucessfully installed IIS 5.1 on XP Pro, and have validated a couple of test .asp pages.
When I try to connect to Access through Front Page, i get the following error:
The Database Results component on this page is unable to display database content. The page must have a filename ending in '.asp', and the web must be hosted on a server that supports Active Server Pages.
I am using a Replace function to replace single quotes with double when submitting a text field in the database i.e. Replace (q, "'", "' ' ") which works fine. When I retrieve the field from the database which has apostrophe I am getting 'Object expected' error message. Is there a way to fix this?
I am submitting data to a database field, and the data is being submitted in the following manner to a table in the database:
5,3,4,4,3,3,4,5,4,5,5
It's all comma delimeted. Now, what I would like to do is have an update page in which a user can update these values. I am trying to place the values in a repeated text box that corresponds with a repeated question.
The questions that I am displaying are in a repeated field and each question has a text box that will hold the value that corresponds to. I would like to be able to bring in each value into a repeated text box. Right now, each repeated text box contains the above information. (5,3,4,4,3,3,4,5,4,5,5). Is this possible?
I have a search set up on my site to compare between two <select> values and the value in the data base, but not sure if I have the sql statment correct, my search returns all rows from the table, I want specific row that is between one form select and another... ie. below
for this particular example I want to know if the database AD_PRICE field is between <select name=price> and <select name=price1> and if so, return the only those rows, currently all rows are being returned... Code:
I am trying to write a web application that can retrieve information from an access database, store it in a recordset, update it, then update the access database. However, when I try to update the recordset, I get an error (500).
I have checked my field names a million times (so I am pretty sure it isn't a spelling mistake or anything like that), but nothing is working. I included my code so you can take a look at it. Code:
Just wondering. I am developing a blog. I would like to display the message post on the blog to be limited to, say, 100 words rather than the whole message itself as this will increase the page length.
I would like to know if there is a method to count the words from the record in database and display only 100 hundred words from the actual message..
I am currently working on a document management system for my company's Marketing department. They wish to be able to upload files to the server.
Rather than deal with the many permissions issues we have had in the past with saving and deleting these files to the server's file system, this time we are trying to use SQL server BLOB fields to store the files.
The premise is simple -- a user clicks on the link and the file is then shown in the browser. The documents are mostly word, Quark, and Adobe Illustrator documents. I was thinking the code would go something like this: Code:
I have about 26 checkboxes that place all of my contacts into categories so in my database for contacts i have a field called categories that contains all of the categeories that each contact belongs to seperated by a ",". 1,5,17 etc.
I need help getting these values out of the database so that when I user select category 17 they get all of the contacts that containg the 17 in their respective categories field.
I have this page with photo thumbnails that are clickable. Each photo has corresponding info saved on a database. When the thumbnail is click, im trying to show the data in an asp page called info.asp.
sample: Photo #1 when clicked goes to: info.asp?no=1 Photo #2 when clicked goes to: info.asp?no=2 so on so forth..
the database fields are: no picname date details
I only know how to display ALL info from a database.
But i cant figure out how to display SPECIFIC info triggered by a query string. Example. Photo #1 is clicked. I only want the data that corresponds to Photo 1 to be displayed. How can i do this?
I want to seach though the drives i.e c or d drives and find for the folders and subfolders and even the files and by that order only it should be inserted into the database.I am using MSACCESS database.
I am trying to search for clients contained within a database using multiple search criteria that the user is able to select using a front end form.
The user is able to select there criteria by selecting one or more check boxes and the results are thus retrieved based on what the user has selected. The search works fine until you try and select multiple client types Code:
I am trying to run an ASP page in IIS 6.0 and I keep getting one of two errors:
-2147467259 (0x80004005) The remote procedure call failed and did not execute.
I have Win XP. It's been running fine for a long time and then yesterday, for no apparent reason, I get this. I've tried the links to asp.faq that I've seen others post and nothing works.
As a test, I created a simple ASP page with just '<% Response.Write("Hello") %>' in it and still the error occurs so it's not a scripting or database problem. DotNet seems to run fine and I can run HTML pages, I also have Apache and can run PHP scripts with no problem ... everything except classic ASP.
Any ideas? This is driving me crazy and I need IIS running because I am falling behind in my work. As I mentioned, I've been running ASP scripts on this machine for years and have never seen this problem.
I have my website with an Iframe in the middle of the main index. I have a point where you click and it changes the index page and loads a certain html or asp page in the iframe. I have this set up using this code:
I've built a simple/beginner's program and I'm trying to run it and receive the following error:
Error while trying to run project: Unable to start debugging on the web server. Debugging failed because integrated Windows authentication is not enabled.
This is the error which i got when i tried to display message in my text box which is a aspx page.
Error which i got:Server Error in '/' Application. --------------------------------------------------------------------------------
Runtime Error :
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
i was trying to run bat file from asp page and getting: Access Denied
but when i run the bat file from the command prompt on the local server, it's running good the bat file copying files from target computer in the LAN to the local computer, o.k
i give write and execute permission on the IIS for this site on the local folder(where the bat file) i assign full NTFS access for "test" user on the target computer i shared the folder with Everyone Full control and assign Full NTFS access for the "test" user but still cannot run the .bat file
where it can be the problem, how i need to set the site on the IIS to run the bat file?
I am getting this error when trying to run an Update query, Microsoft OLE DB Provider for ODBC Drivers error '80040e14' Can anyone explain to me what this means and where I'm going wrong.
I do not understand why. I am running perfectly well asp.net on a virtual directory, but if I put a simple asp file such as this, and named it foo.asp, and try to run it from this virtual directory, I get the 500 error:
<html> <body> <% Response.Write("hello")
%> </body> </html>
Any ideas why? I check the Properties of this virtual directory, and under The Virtual Directory tab, Configuration button, App Mappings tab, I can see .asp listed pointing to C:WINNTSystem32inetsrvasp.dll . If I look at this folder the dll exists.
I'm running windows 2000 professional. But I found the same problem in another computer running Windows 2003 server, IIS 6.0
I have just started using ASP, I am normaly using PHP but I thought ASP might be a good road to go down. I am having a few problems, I am trying to limit the number of records I take out the database but I keep getting errors.
I am testing a new website I built on the actual server. My section for uploading documents seems to be giving me problems. Can someone help me please? This is the error I am getting:
Microsoft JET Database Engine error '80004005'
'c:logindatairb.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
I have a query. When I write out the sql and run it directly in the access db. it works. When running it using ado it doesn't work. I know I have run into this before but don't remember what the solution was.
Works in access but when running it using connection.execute sql
I get the following error:
Microsoft JET Database Engine error '80040e14' Syntax error in INSERT INTO statement. admin.asp, line 345
I've had some problems with an ASP site I've developed. Everything is pretty simple/basic, however, the box it is hosted on is very "neglected" to say the least (old NT 4.0 box, zero services, etc).
Anyway, I have these pages that worked fine until today. The pages are fed from an Access 2000 database. The system administrator's been switching all the DNS records for various boxes lately and was wondering if this could be the culprit giving me this error.
I know this error is often associated with I_USR account privileges, could they have been re-set during this process thus giving me the error? Or could it be something else?
Unable to open registry key 'Temporary (volatile) Jet DSN
I keep getting this error and it is when i have my database open whilst i'm trying to use my site. Is there something you can do that allows you to have your database open and still use your website.
Microsoft OLE DB Provider for ODBC Drivers (0x80004005) [Microsoft][ODBC Microsoft Access Driver] Could not update; currently locked.
This error occurs when I execute the codes below but I don't see any mistake.
while not rs_month.eof cmdDel2.commandtext = "Delete From " & rs_month("table_name2") cmdDel2.execute() cmdINSERT.CommandText = "INSERT INTO " & rs_month("table_name2") & "(BUID, SBUID) SELECT SBU.BUID, SBU.SBUID FROM SBU" cmdINSERT.Execute() rs_month.movenext 'move to the next row wend
I am trying to connect to a database and insert data from a form. The code is correct, to my knowlegde. Now, I have another page that is selecting from the database, this page works fine. The page inserting for some reason I can't firgure out why it is giving me an Operation must use an updateable query. I have read through some of the cause for this and haven't had much luck here's why.
I think it is the permissions but I need someone to walk me throw how to change them. The company has a dedicated server located off the property where the web site is contained. We also have a mirrored server in house that I have access too. Now when I go into the mirrored server and right click on the database I can change the permissions here.
Which I have done and it's still not working. At first I didn't have IUSR set up, I have a couple of Iusr accounts to chose from and don't know which to choose. Plus when I finally did choose one the code still gave me the same error.