IIS And The Time() Function.
I guess a web server can be configured in many different ways around the
Globe, I know the Date() Function can show several different shapes. But
will the Time() Function in vbs always return 6 numeric characters, like
15:12:04.
(Hours:Minutes:Seconds.) If this is so then I could rely on this
in my code right? Or should I expect Seconds:Minutes:Hours, or perhaps
4:3:12. I know I can use the FormatDateTime Function if the answer to my
question is negative.
View Replies
ADVERTISEMENT
When the Form is submitted I use the Date() and Time() functions to put the date and time into the Body part of the e-mail. The time reported is three hours earlier than the time at which the Form is actually submitted.
I understand these functions are evaluated on the server so the server must be in a time zone three hours earlier than where I am . Is there any way I can get the local time at the location where the user is actually located. ?
View Replies
View Related
I want to make a function that connects to my mysql database and ranks the users who have achieved the most points during that day. How would I structure something like this?
View Replies
View Related
Can anyone think of a short piece of code which does he following:
-------------------------------------
if Current Time is LESS THAN 19:30 then Write: Open For Business
Else
Write: Sorry - Closed
-------------------------------------
and
-------------------------------------
if Current Time is Between 12:00 and 14:00 then Write: Away to Lunch
Else
Write: Open For Business
-------------------------------------
It's actually for a call centre app, just the above scenario is much easier
to explain.
View Replies
View Related
How do i make time function return 24H time instead PM/AM time ?
View Replies
View Related
If I want a message to show on the 3rd Friday evening and Saturday early morning of each month, is there a better way than the code that I use...
aztime = dateadd("h",-2,now())
If (day(aztime) => 14 and day(aztime) =< 21) and ((varDayOfTheWeek = 6 and dhour => 15) or (varDayOfTheWeek = 7 and dhour =< 2)) then
my message here
end if
The only month it would fail in 2008 would be June, so I was hoping there is code that would just deal with the 3rd Friday or Saturday of the month.
View Replies
View Related
Is there a way to get the Military Time from a function? This
23:07:27
instead of this
11:07:27 PM
View Replies
View Related
i have some lines of codes.. probably i'll make it a function..
i want the function to be executed every 24 hours or some other stated time.how do i do that?
View Replies
View Related
What i'm looking for is an asp function which automatically runs every day at e.g. 12:00 AM and then updates a database. So no user or external event is involved to trigger the function. It operates stand alone. Hope there are some code examples available.
View Replies
View Related
I have an asp page in which I use the �time() function but that just gives the time at the moment the page is loaded. I need to reload/refresh the page once every second so the seconds increase by one continuously.
View Replies
View Related
I would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.
View Replies
View Related
I have a website that I subscribe to that allows me to track tasks. I have an extra computer with a big monitor that i want to always display the task list. the problem is after so many hours I get logged out.
I need to need to reload that sign in url every few hours Code:
View Replies
View Related
there i was just windering how do i compare a date/time vlaue in sql server agaisnt the computers' date/time.
for example, if computer date/time is two months or 2 weeks before the database date/time do something
View Replies
View Related
Currently working on a ASP for a friend, which requires the date and
time on it. It pulls in entries from an Access Database with dates and
times in the format of:
"Fri Oct 17 18:02:46 2003"
However my date and time on the ASP page is displayed as:
"Friday, October 17, 2003 18:02:46"
using the script:
"<%Session.LCID = 1033%>
<%=FormatDateTime(Date(), vbLongDate)%>
<%Session.LCID = 2057%>
<%=time()%>"
Anyone know how to change this script, fully or partly to produce the
date and time on the format that's in the access database i.e. "Fri Oct 17
18:02:46 2003" Code:
View Replies
View Related
I am working on a database that collects information about incidents. One of the fields that people enter is the time of the incident. I am trying to convert that string that people enter into a OdbcType.Time and I am at a lost.
View Replies
View Related
How will we convert the system date & time to other timezone for eg: Eastern Time zone using ASP?
View Replies
View Related
Any some tools or sample codes drop down asp script execute time and
database connection time ?
View Replies
View Related
I'm trying to do a very simple code that converts the server time into a time zone of your choice.
<%
dim h 'Current Hour
dim i ' Time Zone Increase - add or subtract hours
dim r 'Result Here
h = Hour(Now)
i = + 2
r = h + i
%>
but obvisouly i'm having trouble with the time zone convert.
View Replies
View Related
What's the difference between private and public functions in ASP? When should I use either?
View Replies
View Related
I am trying to compare the NOW time with a "deadline" time. Please help. Just not sure why this is not working. I need to be able to say IF IT'S BEFORE 9:30 TODAY, IT'S OKAY TO ADD SOMETHING. IF IT'S AFTER 9:30 TODAY, YOU MUST ADD IT TOMORROW.
CODE:
nowtime=now()
deadlinetime=formatdatetime(now(),2) + " 8:30:00 AM"
response.write "NOW: " & nowtime & "<BR>"
response.write "Deadline: " & deadlinetime & "<BR>"
if nowtime<deadlinetime then response.write "can send out today" end if
if nowtime>deadlinetime then response.write "must send out tomorrow" end
if
RESULTS:
NOW: 1/18/2007 8:51:43 AM
Deadline: 1/18/2007 8:30:00 AM
can send out today
As you can see, NOW is GREATER THAN Deadline, so it should must send out tomorrow.
View Replies
View Related
i want to calculate the total time between to dates and time.
Example: Total time elapsed from date 1 time 1 to date 2 time 2.
27/09/2004 11:00 - 28/09/2004 10:30
The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.
View Replies
View Related
I am using a simple guestbook /portal and i want script to send mail to the thread owner when someone reply his message.
this is the send message code ....
View Replies
View Related
Can I define a function inside a function. e.g;
function abc()
function xyz()
....some code.....
End Function
End Function
I googled this but can't find any related topic.
View Replies
View Related
I want to use the instr function, but return results from it depending on surtain functions, I can't realy explain so I'll show my example:
I have a string in wich some word I want to find might be in diffrent Capital Letters order, I want the Instr function to return all the values of the place of that word (avcourse I'll run a for and increase the starting point of the Instr func until it returns 0). The instinct thought is to use the Lcase or the Ucase functions, but in this case I don't know how to use them. In the same Idea I wanted to use the Instr Func with the trim Func, But Its realy the same principle if I just understood how to do so.
View Replies
View Related
i am trying to get a time variable which is 30 minutes before the current time to use in a calculation.
The code I am using is:
validationtime=time-3000
response.write(time)
response.write ("<BR>")
response.write(validationtime)
but the response I get is incorrect along the lines of:
11:54:42
14/10/1891 12:05:18
What am I doing wrong, why is validation time also including a date
View Replies
View Related
Can someone tell me how i can use a if loop
its related with time I want to display a registration form on 29 Jan 2007
only between 10am pacific time to 1pm pacific time
so only between 10am - 1pm pacific time the registration form should appear
i live in the central time zone
can someone tell me how i can make this happen.
View Replies
View Related
I am trying to use the time function to determine whether or not it is morning, afternoon or evening.
I wrote my code and then changed the values it is comparing with to see if would work and it doesn't, it just stays on the good morning.
<% if time > 0 then %>
Good Morning <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
<% if time > 12 then %>
Good Afternoon <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
<% if time > 18 then %>
Good Evening <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
Do i need to put quotes around the number i am checking with?
View Replies
View Related
how can i get this tag to adjust for time zones? This is probably simple, but i just can't think of how to do it. Code: <%=Time%>
View Replies
View Related
I am writing an XML file with lots of Data and it takes time but before the operation can be finished I get this error
Quote:
The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.
How do I handle this?
View Replies
View Related
Would anyone know if there is an easy and clean way of presenting maybe a time control field in html in an .asp page that allows a user to specify a certain time of the day? Currently using an <input name="SpecifyTime" type="Text"field but was wondering if there was a better way of doing this as to where users won't mistype in entering non time related characters?
View Replies
View Related
Would it be a stupid idea to use the Log Util component to retrieve the UTC date/time? It appears that the DateTime property could be used for this, but I'm not really sure how it searches through the log file.
View Replies
View Related
I've used this ASP funtion to display the time on my web page:
Date: <%= FormatDateTime(Date, 1)%>
Time: <%= FormatDateTime(now, 4)%>
THis was working fine until i moved my site to a server based in the states, not the time is 5hrs behind. help me resolve this?
View Replies
View Related
I am using ADO to connect to SQL 7.0. At times the connection timeout expires. Is there any way to inrease the default time out? I think currently its 60 secs. Here is the code that I use to establish ADO connection.
set rs = Server.CreateObject("ADODB.RecordSet")
sCon = "DRIVER={SQL Server};
SERVER=Indy2;DATABASE=ProdProtrans;UID=xx; PWD=xxxxxxx"
View Replies
View Related