IP Range Comparison

I need to compare an IP address to a database that contains ranges for each byte in a potentially "valid" IP.

Columns in the msSQL db are IP1, IP2, IP3 and IP4.

The problem is that one entry in the database may have a range. If I were to query all four columns and concatenate the data, I may get something like this:

12.35.124.12-89

So if a user sends me 4 variables (1 for each byte in IPv4) over a form, how I would I begin to compare this data?

View Replies


ADVERTISEMENT

Date Range Comparison

I am back with another question. I need to have the user input two dates for a date range--thats easy! But now I would like to pull all the files up in a directory that are within that date range. I don't know how to do a comparison on dates.

I already have a working script with a loop pulling up all the files in a directory based on one date entered and listing them ---now I want to make it pull up all the files within this date range---just need to know you can do a date comparison in asp.

View Replies View Related

Comparison

i am trying to get a piece of code that will check a value and then act accordinly - the usual thing with a For loop enclosing IF THEN ELSE loops - heres what i have
Code:

FOR removecounter = 1 to 15
IF removecounter = Session("newoptions") THEN
response.write "THEY ARE THE SAME - NOTHING TO CHANGE<br />"
ELSE
IF removecounter < Session("newoptions") THEN
response.write " NOTHING TO CHANGE <br />"
ELSE
' the only other thing it can be is > Session("newoptions")
response.write "BLANKING THE UNUSED<br /> "
END IF
END IF
NEXT


the Session("newoptions") is a value between 1 and 15 - i simply dont understand why this thing doesnt work

View Replies View Related

Comparison Using Loop

I am doing a scheduling system. The concept i have but i am weak in my programming, therefore i hope that u all can help me on this.

i have a capacity (uph x shift x 7.17) and orderperday (total orderqty per month / total shift per month)

the thing that i am not sure in is, i want to do a comparison it is becoz there is a capacity limit per day. i cannot afford 2 produce overlimit. so if the orderperday > capacity then orderperday - capacity = balance. balance will be bring forward to the next day to produce. then the comparison will be done again. i am not certain on how to do the looping in this context.

View Replies View Related

Date Comparison

I am creating a website that is going to ask the user to enter a date! then
from an access database get all records where a date field is greater then
the date entered! Sounds simple, I do it in vb all the time!

here is my sql line: Select * From Participants WHERE DateJoined > 01/14/07
ORDER BY TournamentID

it updates fine with the date the user has entered! I know in vb I need to
put ## around the date I am comparing! I tried that, I tried %%. still I
am getting all records from the database

View Replies View Related

Two String Comparison

i want to compare two string where one is stored inside acess DB and othe one is input by user! so what is the if statement should be look like!

if (string1==string2){
alert("Same")}
else{
alert("Wrong")}

what wrong with the code above?i try that code but could not work!

View Replies View Related

Date Comparison

I have problem regarding the Dates. I am storing Expiry date of the item in DB as varchar since I want date to display in the format MM/DD/YYYY HH:MM.

From user I am taking expiry date in dd/mm/yy hh/mm format and then using toLocaleString() function to convert it into string to store in Database. This function stores date in the format

Sunday, May 1, 2005 10:00:00 AM.

Now at the time of displaying items I am comparing this date to current date. I want to display items which has Expiry Date greater than today�s date. But it is not giving proper result. It is showing items whose expiry date is previous than today�s date. So not showing the desired result.

View Replies View Related

Date Comparison...

Just wanna ask if any1 noes the method to compare between current date(today) with other date and state out the difference of days in between? and also for current date(today) is it date()?

View Replies View Related

Comparison Of Dates

My name is Abhishek. I am writing a code in ASP which wants to access all records from SQL Server database where date lies between 11/24/2004 and 12/20/2004.DateVal is a field in custdate table.Can u reply me ASAP i.e. within 2 hours.

View Replies View Related

String Comparison

I am writing a script that allows a user to edit one record and its fields in a MSSQL database. For the time being I don't mess with the data, I just display what the script thinks should be updated.

Output is below.

Field name => Original Value = New Value submitted by user

Code: ....

View Replies View Related

Comparison Of 2 Variables Using If

If the 2 variables after comparsion return true, then the statement: This file had been inserted already will be displayed! but currently, there is nothing shown when i execute

ResultSet rs = stmt.executeQuery("SELECT * FROM DATES");
while(rs.next())
{
String date1=rs.getString("Dates");
%>

<%if (date.compareTo(date1)==0)
{%>
<%=("This file had been inserted already!")%>
<%}}%>

View Replies View Related

Date Comparison

I'm comparing a date held in a string with a date held in an access database using an SQL query. However despite tests in which the string and the date held in the database are exactly the same, no matches are found.

Here is my SQL query:

SELECT id, TimesheetDate FROM Timesheets WHERE TimesheetDate=VarDate

The format of the date in the database and the format of the string are exactly the same.

I understand this is because the VarDate variable is a string and not comparable so how do translate the string into a date format the database can make a comparison with? I've tried using CDate() with no luck.

View Replies View Related

ASP Comparison Question...

I am doing this here:

dim i
dim j

i = 10
j = 10

If i = j then

But it is giving me a false result...

Any ways to do this comparison so it gives me the proprer result?

View Replies View Related

Date/Time Comparison With If Then...

I'm looping through database results where I have a date time field in the format: 9/2/2007 6:28:53 AM. What I'm trying to do is flag entries that are within the next 12 and 24 hours with a different color. I'm doing this currently with a counter field on another project like this:

PMCOLOR = "#000000"
If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 2800 Then
PMCOLOR = "#FF0000"
End If
If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 1400 Then
PMCOLOR = "#FF9900"
End If

This turns the line red if the current value is within 1400 of target and orange if its within 2800 of target. I want to do exactly the same thing with the date/time field flagging entries red if they are within 12 hours of the current time/date and flagging them orange if they are within 24 hours of current date/time.

I'm not sure how to break down the time and date and compare them to the current time and date, though. Its easy with integers.

View Replies View Related

Date Comparison Quirk

I had a script set up to create a redirect until a certain date, and I
left the script in there after that date thinking it would just be
dormant until I changed the date parameters.
To my surprise, it started redirecting again. I must not be clear on how
dates work.
Here is the very simple code:

<%
if date < "8/20/2005" then
response.redirect(url)
end if
%>

View Replies View Related

Utf-8 String Comparison Failed

I want my website to support multi-lingua, so I add Codepage="65001" in my english website.
However, after adding that, all the string comparison failed (login page, catcha).
I thought I only need to add codepage, then my website will become multi-lingua site Did I miss something?

View Replies View Related

Problem With Data Comparison

I have a site where I need to compare the current date with the clients wedding date. (ie: 3/09/2005 with a wedding date like 6/15/2006) Here is what I'm using now.

CIExpires = DateDiff("d",CurrentDate,WeddingDate)

It will give me either a positive or negative number. I then just use this to either show or hide a link.

If CIExpires <= 0 Then

'don't show link

Else

'show link

end If

What is the best way to do this? The one above just doesn't work.

View Replies View Related

VBScript: Date Comparison

I am doing a date comparising. Is it possible to compare a selected date with current date which call from date function in VBScript. If can please show me the coding or reference or source online. Or you all have any idea on it?

View Replies View Related

Date/time Comparison Problem

I am trying to pick up records from a date range without much luck. For my
example below I am trying to pick up all records made in the last month.
However none are being found (my code is tried and tested for all records).
My database is in Access format. Field "datetime1" is of Date/Time data type
getting the default value by using now()

The relevant part of my code is as follows. Can anyone see what I'm doing
wrong?

View Replies View Related

Price Comparison Script/Code

I have looked all over the net and even down the back of the sofa but I've been unable to find any scripts that allow me to add price comparison functionality to my shopping cart. where a script might be or even offer some pointers as to how I might go about doing this.

View Replies View Related

Question On String Comparison In SELECT Statements

question on string comparison in SELECT statements

--------------------------------------------------------------------------------

First off, this is not the standard problem that can be solved by using:

SELECT * FROM table WHERE string LIKE '%abcd%'

It's actually sort of the opposite of that. I'm looking for a query that can take a string variable and will return only rows where the complete string in the relevant column is a string of the variable passed to the query. So for instance, if the variable passed was 'abcd' then...

rows containing only these strings in the relevant column would be returned:

'abcd'

rows containing these strings in the relevant column would NOT be returned:
'abcdefg'
'abcdxyz'
'abcd1234'
'abcde'
'af'
'hijk'

Is there a way to do this with a MySQL query?

Thanks in advance.

View Replies View Related

IP Range

If an ip address falls in between 29.0.0.0 to 29.255.255.255 then i would like something to happen. I m not too good with the sql math part but i figured it would be something like this

Code:

<% if Request.ServerVariables("REMOTE_ADDR") >= "29.0.0.0" or <= "29.255.255.255" then Response.write("hello") end if

View Replies View Related

Out-of-range Datetime Value.

Once i inserted "date()" in date field
This worked fine for 3days
but on the 4th day I got this error

The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

Again I changed the format of date to oracle DB format
and Ive solved the prob

I just want to know why I got that error

View Replies View Related

Date Range

I have a database with a table that contains date fields "startdate" and "enddate". How do I build a code in asp to select the data contained between a date range entered
by the user?

View Replies View Related

Out Of Range Error

I'm trying to set up a random product feature on my site. Originally, I set up a hard-coded array of the ID numbers I wanted to randomize, but now I want to set it up so the random numbers are the ten most recent products. Code:

View Replies View Related

Date Range

My SQL statement is returning either 0 or all members not just the members that are beyond todays date.Code:

strCountPaidForumMembers = "SELECT COUNT (members.membersSubExpires) AS totalPaidMembers FROM members WHERE (((members.membersSubExpires)>=" & date() & "));"

View Replies View Related

Subscript Out Of Range

Can someone help me find out why i am getting this error message :

Microsoft VBScript runtime error '800a0009'


Subscript out of range: '[number: 47]' /Risk/Risk_Continued_test.asp, line 72

my code is :

' create the MM_fields and MM_columns arrays
MM_fields = Split(MM_fieldsStr, "|")
MM_columns = Split(MM_columnsStr, "|")

' set the form values
For MM_i = LBound(MM_fields) To UBound(MM_fields) Step 2
MM_fields(MM_i+1) = CStr(Request.Form(MM_fields(MM_i)))
Next

View Replies View Related

Subscript Out Of Range:?

Can anyone tell me what this error means?

Microsoft VBScript runtime error '800a0009'
Subscript out of range: 'Request.QueryString(...)'

View Replies View Related

Date Range

I have a db with dates. I have an sql select statement that is able to select records with a range of dates. The problem occurs when I choose a range of dates from 2 different months.

Code: .....

View Replies View Related

Inner Quartile Range

I'm querying to get an array of numbers. I need to find the "Middle %50" of that array of numbers. Is there a way to find the Inner Quartile Range using an ASP function? I cannot find any math functions that would do this.

Could I do it manually? Sort the values, split the array up, split it again to find the "Middle %50"?

View Replies View Related

Time() Range

I have this dropdown box and the options is TimeShift (6a-2pm, 2p-10p, 10p-6a ), im getting this data in a table (Acess DB) . My problem is how can i display (option selected) the actual shift based on the actual time. Code:

View Replies View Related

Date Range

I am looking to make a sql query with a date range of "last week". This would be 2 sundays ago to last saturday.

View Replies View Related

Specified Date Range

I have a requirement where I need to make a report for each auto dealer how many hits they got on specified date range, so for each car detail page I increment the counter and total it while doing that I store the last hit date, this gives the total hits for the dealer BUT does not facilitate date range

How do I give the user a date range so that he can check how many hits the dealer got lets say for last week OR last couple of days?

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved