I want to put this code in all my asp programs. code'objrs.cursorlocation=adUseclient' in all my asp programs. i hve created around 30 asp programs but forgot to place this one.
So is there any way to write only this code(objrs.cursorlocation=adUseclient) in any program, and include this file in all this 30 programs using #include file.
In all 30 programs , i have written code
set objrs=server.CreateObject("adodb.recordset")
objrs.open strsql,objconn,3,3
I am not sure if this is in the right thread, but...I am making my new website and I haven't been able to get a 'siteinclude' file to work with my default page.
I created a site wide file, basically, includeing the header and table of contents and eventually the footer. I have other sites like this, but cannot figure out what is wrong with this one.
I thought that by putting together a site wide file, i could easily generate many pages that are similar, by adding <!--#include virtual="/siteinclude.asp"--> to the top of the page. Then making the page regularly, save it as .asp and it should have when I just created as well as the 'siteinclude' info, right? Well, the problem I am having is with the default file. It is appearing BELOW the 'siteinclude' info, instead of within it.
response.write "<td style='background-color:#FFFFFF;'><% if objRs('ThumbImageURL') <> '' then %>"
View Replies View RelatedI want to be to call my menu from another file onto my page so that i dont have to add it to every page of my website. The problem is when i try to add it using the include method it says that only one include file is allowed on an ASP. The other include file is my connection string so i cant really take that out of the page because then nothing else will work!
How can i get the menu page included as well as the connecting string?
Have added the code below, i have highlighted the 2 include files that i want to use in blue, i have also left the div tag in for where i currently have the menu which is what i want to take out and have ther include file there instead, if that makes sense. Basically the bit in red i want to be able to remove from all of my pages and add the blue file above the red code in instead, but i dont know how!!!!! Code:
I have an asp page written entirely in jscript with a vbscript used as an include file which one variable on the page must access.
When the page runs, I run into jscript complilation errors when it tries to access the include file (since it is written in vbscript), and I can't figure out how to get the two to work together. How do you get both scripting languages to work on the same page?
At my site I have designed a framework with tabs as below:
(tabs_1.asp)
+----+ +------+ +-------+
| MC | | Cars | | Boats |
+ +-------------------------
then, into tabs_1.asp I include another page
(tabs_1_2.asp)
--------+ +--------------
| New | | Used | | Crasched |
+-----+ +------+ +----------+
Works fine so far... Here comes the problem...
The file tabs_1_2.asp has an included page (data.asp) witch doesnt appear...
When I look at the sourcecode from the webbrowser it seems to have been included but nothing is visible.
Is it inpossible to make several includes in the way I described?
I'm wondering if there's any way to include a XML file (with a XSL) in a ASP file? I've tried this <!--#include file="publications.xml"--> but the XML-code is included before it is formated according to the XSL and ends up being unformated.
View Replies View Relatedhow would i get something like this to work...
<!-- #include file="<%=Request.GetString("view")%>.txt" -->
i know wat i want and all but i can't figure out how to make it work.
I want to include files, a header and a footer to my asp page. The files i want to include its on another server, i can reach it with a www-url. Can i use the www-url to include the file to asp page?
View Replies View RelatedHow can I include a .cgi file in an .ASP file?
I've tried #include, Server.Transfer, and Server.Execute (yes, I know the last two are
only for ASP, but I tried it anyway).
If I have to, I guess I'll use ASPHTTP to do an http call to the file but first I wanted
to see if there was a more elegant way to do it
Is there an efficient way to include the output of a .cgi file in an ASP file?
Is there any way of having an include file as a string, eg:
<!--#include file="<%=strURL%>"-->
This doesn't seem to work, I get an error:
The include file '<%=strURL%>' was not found
Is my syntax wrong or isn't this possible?
<%
If rsResult.fields(3).value = "" Then
Response.Write "No File Available</td>"
Else
%>
<!-- #include file="Response.Write rsResult.fields(3).value" -->
<%
End If
%>
I do almost exclusively ASP on IIS, so I'm stupid when it comes to dealing with flat HTML on Linux/Apache.I have a static site on a Linux box where I want to do an include on an ASP file on an IIS box, and can't make it work.
I've tried <!--#include virtual="http://where.com/abc.asp"-->
and <!--#include virtual="http://where.com/abc.txt"-->
The ".txt" extension try was in case it's true what I heard that IIS won't let a remote server execute an ASP in an include file.
Also tried <!--#include file=...", even though I know from experience that Apache requires "virtual," not "file."
And also tried <!--#exec cgi=...".
NOT drawing any errors: the generated output just repeats the "<!--#include..." line instead of outputting results from the ASP file.
I want to execute another asp file at the end of my asp file.. How will I do that ?
View Replies View RelatedI use include files a lot in ASP, but I was wondering if these files aren't actually part of ASP at all and you can use them in other web-based files.
View Replies View Relatedhow can i add include file that isnt in my directory i need to add a file called:
http://mpfile.hollosite.com/pafile/pafiledb.php
Trying to use a include file in an if statement and it is not working,I have tried it multiple ways and have keep getting errors or blank where it should be.
Code:
<%
IF session("sessionID") = "" THEN
Response.write (" <!--#INCLUDE file=""loginHeader.asp""--> ")
ELSE
Response.write (" <!--#INCLUDE file=""loggedinHeader.asp""--> ")
END IF
%>
How to include file into an ASP program? I was trying with this command:
<!-#include file="INC_file.asp" ->
but unfortunately it does not work but isn't any error message.IIS server shows primary site,but without informations from incuded file.How can I make it works?
The current html file has to 2 drop down boxes. Depending on the selection chosen, there is a predetermined html file to load.My new asp file will replace the current html that has the 2 drop down boxes and it has its own set of design and graphics. So depending on the selection chosen, instead of loading the predetermined html file, I need to grap a section of the contents in this predetermined html file and add it to the content section of my asp file dynamic.
See, another very customised app. creates this predetermined html file dynamically and I have no access to this. My work around is to get the main content I want from this html and include it in my asp file dynamically.
I'm trying to include file using <!-- #include file="abc.asp"--> and it works without any
problem. but the problem is in if file name is in asp variable how should i write?
I have a few ASP pages within each ASP pages I have a block of Javascript that is different for each ASP page contained within the Javascript block is 20 lines that is same across the ASP pages. Is there any script I can enter that would include these lines from a text files or another ASP file?
View Replies View RelatedWhy can't I get the following running?
<%
Dim GetODBCdsn
GetODBCdsn = <!--#include virtual="connectionssqlconnection.txt" -->
Response.Write(GetODBCdsn)
%>
I have a #Include statement in an Asp page. I want to find the path of the included file at runtime. How can I do that?
View Replies View RelatedI need to include an asp file from another server. Code:
<!--#include file="SicurezzaDip.asp"-->
I think that is the normal way to do it. I've also used the code shown below, but it doesn't seem to work..Is it possible to Include asp files from another server ? How can i do it ? Code:
<!--#include file="http://81.74.60.30/Asp/SicurezzaDip.asp"--> ..
I have a menu that I use as an include file. it's a horizontal menu that extends to show sub menus.
the table the menu is in has silver background. my problem is that when i use the page as a include file the background color for the menu expands to cover the whole page. is there an issue with the include files that would cause the table color to migrate to all the tables?
if any one knows another way i can use this menu as an include file and keep the background color from migrating it would be greatly appreciated.
I just want to ask a basic question that how can i include a file in asp dynamically
i have tried the code but it is not working:
<%
FileName= "filename.asp"
<!--#include file="<%=FileName%>"-->
%>
I used to do a lot with asp and now I'm going to use asp.net technology In asp I had a file functions.asp with all my functions I used on several pages like generating connection to database, generating links on pages and things like that.
Than I had <!-- #include file="..includefunctions.asp"--> statement on
each asp page, at the top of the page.
I would like to know, how is this in asp.net You use the same procedure or is there some other, better way to include functions? I read one book but I didn't found any instructions?
Is it possible to use the same include file on one ASP. Example, I have a logic for valid and invalid users but I'll use the same include file for both scenarios; the difference would only be the position where I'll display the include file in the code for example I want to display it on the top and the other at the bottom part?
Ex.
<!--#include file="../save/include_page.asp"-->
Normally I include files that are in the same directory/folder as the calling file. How can I include a file that is in another directory? Let's say the file that I am trying to include resides at C:websiteHeader.asp . and the file that should contains the include file is reside at C:Source.asp. In source.asp, I will have to write "include file="header.asp"?
View Replies View RelatedI would like to know is it poss to show images from the images folder when used within an include file? Folders I have are:
inc
images
The include fie is requested via a Querystring, but images don't show.
I've tried:
../images/img1.jpg
images/img1.jpg
still blank.
It is possible to add variable into the include file.
<!--#include file="../info/<%=strfoldername%>/notetosomeone.asp"-->
strfoldername is from my database. It doesn't work. Anyone knows how to solve this problem. Or has other way to do it.
Is there a way I can include an ASP file on somebody elses page without useing Java or an Iframe from another web site?
I've tried using #include file but it will only include local files.. is it possible to do this with ASP?
Can someone please give me advice or help me ...I don't know why the include file / image doesn’t work. What did I do wrong?
Here is my project:
In the wwwrootmyproject has the includes folder, images folder, and index.asp.
wwwrootmyprojectindex.asp
wwwrootmyprojectimages
wwwrootmyprojectincludesheader.htm
wwwrootmyprojectmathcalculas.asp
I create an header.htm page and save it in the includes folder. Because, I want to use the header.htm page in other places.
The images folder contains all the images in there.
Here is my header.htm page:
<table>
<tr>
<td>
<img src=”images/header.jpg”>
</td>
</tr>
</table>
==
Index.asp page - the include works..the header image shows.
<body>
<!--#Include File="includes/header.htm"-->
</body>
here is a problem, I created a Math folder in the myproject. In the math folder I have a calculas.asp page.
In the calculas.asp, I've included the header.htm page
Here is what I did in the calculas.asp page.....