I read through your posts and also other forum about this error and I did what was said but I still get this error:
INSERT INTO feedback ([pname], [email], [comments], [outcome], [additional], [try]) VALUES (
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/room20/survey.asp, line 33
I even put everything in brackets, just to be on the safe side for reserved words.I did not do Word Wrap, so everything is on one line. Complete code is as follows: Code:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement. /ORG/HRM/medewerkertoevoeg.asp, line 50
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Missing semicolon ( at end of SQL statement. Code:
I'm having a very difficult time with an ASP page that I develpoped in Dreamweaver and the MS Access DB it's supposed to update. When I submit the data the following error appears:
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/sessiondata2.asp, line 115
I know this is usually a reserved word issue but I don't think that's the case here because the page updates perfectly when executed on my computer as a testing server.
The rest of the site updates data into the database properly so I know the connection string is working. I can't figure out what would throw an error on a live server when there isn't one on a testing server. Code:
Starting with "signup.asp" - fill up the registration form. this will forward you to next form.
"signup_process.asp" - process the filled form "signup_success.asp" - indicate that register successfully "Database.mdb" - the database file (MS Access 2000 format)
My problem occurs in "signup_process.asp". The error message found in IE:
Error Type: Microsoft JET Database Engine (0x80040E14) Syntax error in INSERT INTO statement. /myweb/signup_process.asp, line 31
I look through my code, but found no mistake.
But why still I cannot add the information in the form into the "Database.mdb"?
My Code is as follows, im basically trying to get the value from a radio button from another page for a vote, take the value thats allready in the table add 1 to the value and then insert it back into the database, then create a voted cookie and redirect back to the same page to view the vote results. Code:
I am having a problem with an insert statement. I keep getting the following error: 2147217900 Syntax error in INSERT INTO statement. Here is my SQL statement:
INSERT INTO Notes (Note, Submitter, NoteDate, ContactID) VALUES ('Barb us our Rep', 'DrM', '10/13/2004', '1')
I am not able to seee the error. Are there other problems that could give me this error that are not relative to the SQL Command. If I have made an error please help me to see it.
Usually on our server we see or can view source to see where in the INSERT statement something got messed up. I have debugging on but when I run a test, I get the following error:
Syntax error in INSERT INTO statement. Line 57
It is a very long INSERT statement but for the life of me, I can not see where it is wrong. What I am wondering, if all I am seeing is "Syntax error in INSERT INTO statement. " does this mean it is at the beginning of the statement since i do no see any of the actual data on the error page?
I have this insert statement where instruction field in the DB is a memo field.
SQL="INSERT INTO int ([instruction]) VALUES " & _ "('"&Request.Form("myTextarea")&"')"
objConn.Execute(SQL)
Its giving me error: Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
ive made the most simple page in the world in ASP, and I cannot for the life of me figure out why this page doesn work. whenever I try, it comes up woth "syntax error in statement".. Code:
I can't seem to get this page to work. Its a basic form (with a lot of fields) and I need to insert part of the data into one table and part into another. Here is what is at the top before the <html>
tripreportR.asp
Code: set The form's action is to post to itself. I can't get the data in and I can't even get the page to show now. Any suggestions, ideas, links, resources would be great!
I'm having a problem with passing variables inserting to my database. Here's what I'm doing. I have a page where the user selects a team member (this is fine) Once the team member is selected I have the variables on the form send and email to all supervisors and the member selected (this is fine also) BUT, I'm having problems inserting the emailed information to my access 2000 database after is email. Can someone guide me in the right direction.
I am working on a project using an access db. Here is the problem.
Error Code: Microsoft OLE DB Provider for ODBC Drivers error '80040e14' [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'unit=6400s' Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code: sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
sqlquery="SELECT * FROM tblrequest WHERE Req_id= " & Req_id & " " set rs=con.execute (sqlquery)
Req_id is coming from a form like so:
Req_id=request.form("Req_id")
The error is:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Req_id='.
On the first line of the query.
See anything wrong that would cause this error?
Please help, the Req_id is being sent from previous form via a hidden value hope i'm requesting this properly.
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause. ----------------------------------------------------------------------------------
Yes, I know this question has been answered a million times, however, I've already searched through this forum and my problem still hasn't been resolved.
Basically, I keep getting the error above whenever I try to execute this code. This code is from a search page entitled search.asp.
I'm using an Access database file for this. I can issue SELECT statements on the database, but for some reason it says I have a syntax error with my UPDATE statement. Code:
openAccessRS("UPDATE students SET password='test' WHERE sid='123456789' AND email='google@yahoo.com'")
Don't worry about the openAccessRS function. It just takes the query and issues the ADO.RecordSet.Open function. I have the students table filled with the correct information. I do have an entry where the student id (sid) is 123456789 and email = google@yahoo.com.This query worked fine in a MySQL DB.
Microsoft JET Database Engineerror '80040e07'Syntax error in date in query expression 'fldUserName= 'muratsa' AND fldTimeIn=#01.09.2003 16:52:20# AND fldOffline=0'. /Vestelweb/logout.asp, line 7
I am using the Now() function to get the date in db the format is general date and in regional settings of the server the seperator is "."
Could anyone tell me what is wrong with this SQL statement:
sqlInsertShow = "INSERT INTO tblShowings (date) VALUES (#12/12/2004#)"
Im trying to inder this into an MS Access database, and the field name DATE, is set to date/time value.The error message I get is:
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement. /fyp/backend/add_show_03.asp, line 41
Ive been scratching my head over this for AGES now! It just will not work.
I am trying to update an Access database using an ASP form with a date. All I return is a custom error telling me there is a syntax error with the field
i get the following error when i execute this update statement cmd.commandText = "Update Login set Password = '" & pwd & "' , DateofCreation = '" & creationdate & "' , Active = " & active & " where Username = '" & uname & "'" cmd.execute ---------> line 25 pwd= "secret" creationdate = "21/12/2004" uname = "test" active = false (datatype = yes/no format = true/false) i am using access database i have gone through this statement many time but couldnot find the error.
Microsoft JET Database Engine (0x80040E14) Syntax error in UPDATE statement. /portfoliomgmt/saveedituser.asp, line 25
I have a page on my site in which i wish to display links to brochures, and i have stored an index of these links in my database. however when i pass from the master page, http://www.tripakltd.com/brochures.asp to the detail page, by selecting a item from the list/menu and submitting, i cannot seem to be able to carry a variable as a value, i.e i am submitting CategoryID as a variable so i want it to equal % but i only seem to be able to get it to work if a specify a figure, such as number 1, and then that isnt very useful because for every product i select on the drop down list/menu i'll only receive the brochures associated with number 1.
I am getting some syntax error on this line. Can someone see where my error is and how I can change it? I am sure this one will be a easy request for somone to spot.Code:
set rs=conn.Execute("select Last_Name, First_Name, Approval_Number,LH.Dealer_Id, DP.Fax, DP.Dealer_Name, DP.Dealer_Number, lh.Approved_Dt from Loan_Header lh inner join Dealer_Profile dp on dp.dealer_id = lh.dealer_id where dp.dealer_number = '" & dealerNumber & "'" and lh.Soc_Sec_Number = "'" & SocSecNumber & "'")
I am sure it has to do with my quotes on the variables at the end of the query.
