Insert SQL Statment
i was using INSERT INTO statment for insrting data to a mdb database file
eg
but now it is not working
there is an error
"Operation must use an updateable query. "
ADVERTISEMENT
Insert Statment
Now here is my insert statment and it is giving me this error message:
Insert Record
'strSQL2 = "INSERT INTO tblCONTENT_Links (LinkID, ContentOwner_UserGroupID, ContentGrouping, LinkHeaderOrder, LinkDescription, LinkName, LinkURL, LinkHeader, LinkHeaderCategory, LinkRefSite, Active, Archive, UpdatedDate, UpdatedBy, PasswordProtected, CommonLibrary) values ( 141, 7,'public', " & Category & " ,'" & DocumentName & "','" & DocumentTitle & "', '" & Document & "', 0 , 28 , 'www.skyclimber.com', -1 , 0 , #8/27/2004# , 0 , 0, -1)"
IE error:
Syntax error in INSERT INTO statement.
Insert Statment For Two Tables
ContentID is primary_key ID and it is automaticlly created upon this insert, but want to also insert that content id in table Category column ContentId. Code:
View Replies View RelatedIF Then Statment
i need help with this simple IF then statment.
i want to do this
Code:
IF
response.write objrs ("ok2show") = y
THEN
<img src="http://auditors.demosales.netauditimages<%Response.Write objRS("cnum") %>.bmp" alt="Demonstrator" width="800" height="600"border="7" >
ELSE
<img src="http://auditors.demosales.netauditimagesdefaultimage.jp g"
it's not working it's getting hung up at the response.write objrs part.
Sql In Statment
I have an sql statment with an in statment for ID . I'm trying to get the CompanyID in ( ) but all i get is just the word companyID with no value . i used response.write request.form("companyID") so i know the value is coming to the other page, this is what i have now.
Response.Write ("& CompanyID & ")
and this is what i see
& CompanyID &
how do i get the value of companyID in ().
Asp Sql End Of Statment
what is missing fromt his sql statment its for an asp page that displays a list of results?
rs.Open "SELECT * FROM downtime WHERE downtime.Entrydate = #" & mediumdate&"# AND Supervisors_name<>"none"", conn,1
i get a message saying expected end of statment and it worked up until i added the AND Supervisors_name<>"none" in to the statment?
SQL Statment Variables
I am trying to pass a variable from another page to a sql statment. The variable specifies the one of the columns that I want the sql query to return. I also want to display field contents of the column later in my page. I can't seem to get this to work. Can someone give me a hand? Here is my code:
View Replies View RelatedUpdate Statment
i have this variable:
name="Jones, andrew"
when i update the table it gives an error
here is my update code:
str= "UPDATE tblnames SET Name = '" & name & "' WHERE Id ='" & getid & "'"
can someone tell me whats wrong with it because the name variable has a comma in it.
Problem Regarding Asp /sql LIKE Statment
I'm not an hardcore programmer but i try to do a simple search in my asp pages.
I've a database .
I've try this code:
rs.Open "SELECT titre , sstitre , carac , gastro , historique , cepage FROM catalogue WHERE titre , sstitre , carac , gastro , historique , cepage LIKE '"&Request.Form("Sstring")&"'" , conn
But i've that's generate an error in my explorer...
Reuse Of A SQL Statment
I have a sql statement that pulls up a certain amount of records according to a requirement. Let's say that 20 records show up. I want to get to the 5th one. Well now I know that I can use the move() function to enable that, but it is the same page.
The page executes the sql statement and by default shows the last record in the query. Now when I ask for the 5th record the page is reloaded, the sql statement exectures AGAIN and the 5th record shows up. Is there way to ask for the 5th record without having to re-executing the SQL statement?
ASP/Access SQL Statment
Given the following that results from a form which has multiple checkboxes with the same name value, the resulting string when stored into a variable is this - 129,200,323,330 I used the replace function and got this - 129 OR 200 OR 323 OR 330.
I want to somehow use these values (ints) to specify the particular records in an access database and populate a record set.
When I do this, I get nowhere - "Select * From images WHERE id=" & img_ids
Whereas img_ids is the above string...
Database Statment
I've got the following statment in my website:
<%
if session("memberId") = objrs.fields("memberId") then
%>Some Id<%
else
%>Different Id<%
end if
%>
The problem is, if boths are the some number it still displaing Different Id.
Is there anyone can tell me what am I doing wrong?
What Is Wrong With My If Statment
I'm using the following code on my website:
if left(session("lastPage"), 5) <> "admin" then
session("return") = session("lastPage")
else
session("return") = ""
end if
My problem is even the "left(session("lastPage"), 5) is equal to "admin" it still not equal the variable session("return") to "". Can anyone please tell me why or what Im doing wrong?
If Statment For A Field
how i would go about using an if statment against a field in a database.
i.e
if id = "fieldname"
then
do this
else
do this
end if
I am still learning asp and would be very greatful if someone could help me.
Error With SQL Statment
What is wrong with this statment:
SQL = "SELECT tblEmployee.*, tblDepts.deptdesc, tblEmployee.Inactive FROM tblEmployee INNER JOIN tblDepts ON tblEmployee.DeptID = tblDepts.deptid WHERE " & request.form("txtSearchIn") & " LIKE '%%" & request.form("txtSearch") & "%%'" & " ORDER BY LastName, FirstName"
I am getting a error:
Syntax error (missing operator) in query expression 'LIKE '%%%%''.
Order By Statment
I am hoping that some one can tell me how to add an ORDER BY statement to the following:
<% set rst = createobject("adodb.recordset")
set rst = conn.execute("select RegClassID, StartDateTime, EndDateTime, Description, Location, SpecialNotes from CAL_EVENTS_REG_CLASSES where RegistrationID = "&RegistrationID)
if not rst.eof then %>
The recordset returns fine, execpt I need to be able to order it ASC
Dynamic Sql Statment?
im trying to write a sql statment that will insert a variable number of fields into a database the code below is what i want to do but i know this wont work anyone any ideas?
or even if this can be done?
sSQL = "INSERT INTO sometable("&For Each field In Request.Form ; "&Field&"," next ; &")values"('" "&For Each field In Request.Form ; "&Request.Form(Field) &"','" next ; &""')"
UPDATE Statment
I'm using the following code in my website that is not working:
Dim objRS
strSQL = "UPDATE tblasp SET view = " & session("NumberOfViewer") & " WHERE id = " & session("aspId") & " "
Set objRS = Server.CreateObject("ADODB.Recordset")
objRS.Open strSQL, objConn,2,2
Is there someone please could tell me what am I doing wrong?
Group By Statment Problem
i want to display the number of people logged on at each location... when someone logges in they get a type=1... that works great but when i try to group by the NasName thats the location name.. Code:
View Replies View RelatedIsNull Update Statment
I need to know how to do this IsNull update statment in ASP:
"UPDATE tblUsers SET username='" & lcUName & "', hash= IIf(IsNull([lcHash]),"",[lcNewHash]), inactive=" & llAct & ", locked=" & llLock & ", isadmin=" & llAdmin & ", attempts=" & lnAttempt & ", lastlogin=" & ldLastLogin & ", onlyreadaccess=" & llOnlyRead & " WHERE UserID = " & lnSetID
Find And Replace & For Sql Statment
i have a qs variable that has a & and i need to query the db, what do i replace the & with to query my data correctly?
View Replies View RelatedExecute SQL Select Statment Error
I'm getting this useful error '80040e14' when trying to run a select statement in an ASP page. The connection to SQL Server 2000 is ok. The variables in the Select statement, 'area' or 'areaid' are passed through form the previous page ok.The code is below... Any ideas? Is it something obviously dense on my part?? Code:
View Replies View RelatedEmbed A SELECT CASE Statement In An IF Statment
i have a select case statement that checks for a couple of options e.g.
<%select case aParameters(0)
case 0 %>
.. some code
<%case 2 %>
however i would like to test for a certain condition within the select cases statment. To see if a session variable exists before implementing some code:
Selecting Multiple Tables Using SELECT Statment Problem
I am Trying to use the SQL SELECT Statment to open records from multiple tables into one recordset.
I know the basic syntax of the Select statment but I wanted to know if its possible to recive the table name from the feild or the record that I am readinf from the recordset in any given moment.
To make things more clear, my example:
-Open a connection
SQL = "SELECT * FROM TABLE1,TABLE2 WHERE TABLE1.UserID=" & uid & " And TABLE2.UserID=" & uid
rs.open sql,conn,3,3
while not rs.EOF
-read from record
rs.movenext
wend
rs.close
conn.close
now, in the part that I read from the record, is their any way I can know if that record is from table1 or table2?
How To Prevent Duplicate Values When Using BULK INSERT To Insert CSV To SQL Server?
How to prevent duplicate values when using BULK INSERT to insert CSV to SQL Server? Code:
View Replies View RelatedUpdate Statment & Error :: Microsoft JET Database Engine Error '80040e14'
I keep getting an error when I try to run this update statment: [CODE]
INSERT INTO MYPosts ( IEname, country, server_name, LANIPAddy, license_ver, wrkstn1, wrkstn2, wrkstn3, wrkstn4, wrkstn5, notes, status, rdse, esc, eso, parent, , timezone, ) VALUES ( '" & lcIEname & "', '" & lcCountry & "', '" & lcServerName & "', '" & lcLicenseVer & "', '" & lcwrkstn1 & "', '" & lcwrkstn2 & "', '" & lcwrkstn3 & "', '" & lcwrkstn4 & "', '" & lcwrkstn5 & "', '" & lcNotes & "', " & lcStatus & ", " & lnRDSE & ", " & lcESC & ", " & lcESO & ", " & lcParent & ", " & lcTimeZone & ")"
I get the following error:
Microsoft JET Database Engine error '80040e14'
Syntax error (missing operator) in query expression
Insert Into A Db...
Our graphic designer has just finished redeveloping our website. On the
site, we use SSL to secure the area where a user enters their personal
information to order items from us. (we do not do many transactions - maybe
1 per day...) We are a log home mfg company so they would only order plan
books, maybe a video etc...
When the user clicks "Submit Order", we want to encrypt each data item
(because of new legislation governing customer personal info etc...) and
write a record to an access db. From here it will be imported into our
Customer DB leads database...
I do not use ASP but program in VB 6 and Access 2000. ASP looks similiar in
many ways...
Does someone have a good ASP script for encrypting data? And, if so, is it
fairly strong encryption?
Also, is there any trick to writing an "insert" SQL script in ASP or is it
exactly the same as I would do in VB or Access? Maybe someone has an
"insert" script handy they could pass along including the command to
actually execute it?
Insert In SQL ASP
i have got a data base which contain more than one tables
one for student one for teacher and one for books
i make a fourm to read the input from the user Code:
Insert All At Once
Code:
mySQL="INSERT INTO products (sku, youtube, description, details) VALUES ('" &pSku& "','" &pYoutube& "','" &pDescription& "','" & pDetails& "')"
call updateDatabase(mySQL, rstemp, "insert1")
that's shortly the way i'm inserting new records.
using mysql and asp functions.
The prob is that inserting only one record every time.
if i got data for 3 records how can i make it at once
to add 3 new records in some given order into the db
ADO Insert
What is the best way to see if a record has inserted correctly into the datase in ASP?
Also, how to tell the user what the error is.
I am inserting like this with the ADO command object:
Dim sInsert, objCmd
set objCmd = Server.CreateObject("ADODB.Command")
sInsert = "sp_ADS_Insert_Driver_General_Data "
on error resume next
With objCmd
.ActiveConnection = oConnEnergy
.CommandText = sInsert
.CommandType = adCmdStoredProc
.Execute , , adExecuteNoRecords
DB Insert
Application X has three screens. The user captures information on screen one and then clicks a navigation button to go onto screen two.He does the same on screen three. At the bottom of screen three is a submit button. When this button is clicked the system does some calculations with the information that is supplied and then uploads all the info that was captured on the screens to the database.
Should the data be uploaded to the database all on one go when the user clicks the submit button or should it be uploaded after each screen - ie when the user clicks the button on Screen 1 the data is uploaded to the database and then screen two is displayed.
SQL Insert Into
When the following code runs it produces no errors but doesn't give proper results:
sql = "INSERT INTO TableName (Line1, Line2, Line3, Line4) VALUES ('" & lines(0) & "', '" & lines(1) & "', '" & lines(2) & "', '" & lines(3) & "')"
Response.Write(sql)
SET RS = Conn.Execute(sql)
lines() contains nothing but strings and is never empty.
The Response.Write(sql) shows the proper values going into the proper locations.
However, only Lines(0) actually populates the table. Line2, Line3, and Line4 never receive any values despite the SQL showing the proper syntax.
Insert
i have this insert statement that is giving me trouble, the problem is with expiration_date field the error i'm getting is:
Syntax error in date in query expression '##'.Code:
SQL_Insert = "Insert INTO TableName(ColumnX, ColumnY, ColumnZ, ColumnZZ, ColumnXX, ColunmYY, Expiration_Date) values ('" & _
ColumnX& "', '" & ColumnY & "', '" & ColumnZ & "', '" & ColumnZZ & "', '" & ColumnXX& "', '" & ColunmYY & "', #" & Expiration_Date & "#)"