I have a table in MS SQL Server 2000 that has 4 fields, one of which is a primary key. How can I insert a new record and have SQL Server automatically handle the primary key field? I've tried the following SQL code:
Code:
INSERT INTO orders(TransCode, TransTime, TransAmount) VALUES ('stuff', 'stuff', 'stuff')
but it fails because the primary key is left NULL. I'm sure there is something really easy that I'm missing here.
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Sybase][ODBC Driver]Integrity constraint violation: no primary key value for foreign key 'MemberCode' in table 'PersonMember'
/admin/Member_New-Sybase.asp, line 39
What i am doing is first i have added a record to my persons table the next step is i need to add this person id to the PersonMember table with a new MemberCode and then finally add more information to a membership table. Code:
Let's say that someone trying to insert a record in the primary key which already exist...
it returns an error, and in fact that error:
Error Type:
Microsoft JET Database Engine (0x80004005)
The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again
How can I replace that error with a friendly message such as "that record already exists"
how to display search results on my web site in an order that I specify. at the moment there ordered by the primary key which means there all over the place.I know what the code is but I'm not sure how to use it, can anyone give me a quick lesson, does the code need to be on the search page or the results page?
View Replies View RelatedDoes anyone know how I can open up an entry in a microsoft access database table using its primary key through asp?
View Replies View RelatedIs it possible to ascertain which fields are the primary keys from an Access table just using asp? If so how?
View Replies View RelatedI just want to make the primary key so that it auto increments. Thanks
Code: .....
creating a script that will create a primary key base on the date today and a number ( ex. 1124204-1, 112404-2) with the last number increasing by one. the script should automatically increase the number if the key has already been used.
View Replies View RelatedI have a field couponID as the primary key in my table - when writing the insert statement how do I get the autonumber value to be inserted? below is the code that I have, but it doesn't work
sql="INSERT INTO coupon (Value, ValueSecondLine, ValidThrough)"
sql=sql & " VALUES "
sql=sql & "('" & Request.Form("value") & "',"
sql=sql & "'" & Request.Form("validSecondLine") & "',"
sql=sql & "'" & Request.Form("validThrough") & "')"
conn.Execute sql
I wan to ask isit can generate a primary key before to insert a new record from
asp to database (ms. access 2003). wat coding should i write for generate a primary key
that unique? i cant find a solution to do that. my primary key will be sequences like :M0001, M0002...... follow
isit possible i genrate a primary at ASP pages before store/insert into the database?
basically i have given each customer, in tbl_user, that goes through the first page an "autonumber" (userID) and then each window has this same userID for each window that user selected. so i can then see the relationship between what user wants what windows.
My trouble is that im having difficulty creating a system where the correct userID is entered with the window Code:
I'm looking to display information pulled from a database based on information the user puts into a text box. The user will enter their sales rep number and I want to hit a table and return their name as soon as they tab off of the text box.
View Replies View RelatedI have a table in SQL 2000 with a composite Primary Key on coulumns Instrument_ID (int) and WeekOf (smalldatetime.) I am running asp on win 2003. Code:
View Replies View RelatedHow to prevent duplicate values when using BULK INSERT to insert CSV to SQL Server? Code:
View Replies View RelatedOur graphic designer has just finished redeveloping our website. On the
site, we use SSL to secure the area where a user enters their personal
information to order items from us. (we do not do many transactions - maybe
1 per day...) We are a log home mfg company so they would only order plan
books, maybe a video etc...
When the user clicks "Submit Order", we want to encrypt each data item
(because of new legislation governing customer personal info etc...) and
write a record to an access db. From here it will be imported into our
Customer DB leads database...
I do not use ASP but program in VB 6 and Access 2000. ASP looks similiar in
many ways...
Does someone have a good ASP script for encrypting data? And, if so, is it
fairly strong encryption?
Also, is there any trick to writing an "insert" SQL script in ASP or is it
exactly the same as I would do in VB or Access? Maybe someone has an
"insert" script handy they could pass along including the command to
actually execute it?
i have got a data base which contain more than one tables
one for student one for teacher and one for books
i make a fourm to read the input from the user Code:
Code:
mySQL="INSERT INTO products (sku, youtube, description, details) VALUES ('" &pSku& "','" &pYoutube& "','" &pDescription& "','" & pDetails& "')"
call updateDatabase(mySQL, rstemp, "insert1")
that's shortly the way i'm inserting new records.
using mysql and asp functions.
The prob is that inserting only one record every time.
if i got data for 3 records how can i make it at once
to add 3 new records in some given order into the db
What is the best way to see if a record has inserted correctly into the datase in ASP?
Also, how to tell the user what the error is.
I am inserting like this with the ADO command object:
Dim sInsert, objCmd
set objCmd = Server.CreateObject("ADODB.Command")
sInsert = "sp_ADS_Insert_Driver_General_Data "
on error resume next
With objCmd
.ActiveConnection = oConnEnergy
.CommandText = sInsert
.CommandType = adCmdStoredProc
.Execute , , adExecuteNoRecords
Application X has three screens. The user captures information on screen one and then clicks a navigation button to go onto screen two.He does the same on screen three. At the bottom of screen three is a submit button. When this button is clicked the system does some calculations with the information that is supplied and then uploads all the info that was captured on the screens to the database.
Should the data be uploaded to the database all on one go when the user clicks the submit button or should it be uploaded after each screen - ie when the user clicks the button on Screen 1 the data is uploaded to the database and then screen two is displayed.
When the following code runs it produces no errors but doesn't give proper results:
sql = "INSERT INTO TableName (Line1, Line2, Line3, Line4) VALUES ('" & lines(0) & "', '" & lines(1) & "', '" & lines(2) & "', '" & lines(3) & "')"
Response.Write(sql)
SET RS = Conn.Execute(sql)
lines() contains nothing but strings and is never empty.
The Response.Write(sql) shows the proper values going into the proper locations.
However, only Lines(0) actually populates the table. Line2, Line3, and Line4 never receive any values despite the SQL showing the proper syntax.
i have this insert statement that is giving me trouble, the problem is with expiration_date field the error i'm getting is:
Syntax error in date in query expression '##'.Code:
SQL_Insert = "Insert INTO TableName(ColumnX, ColumnY, ColumnZ, ColumnZZ, ColumnXX, ColunmYY, Expiration_Date) values ('" & _
ColumnX& "', '" & ColumnY & "', '" & ColumnZ & "', '" & ColumnZZ & "', '" & ColumnXX& "', '" & ColunmYY & "', #" & Expiration_Date & "#)"
I have a column call UserDate and it's properties are this : varchar(50) . I have a function which updates the column with todays date. for some reason, if I manualy give the value to be inserted a value of '10/10/2006' or use date() it inserts a value of 0 if I give a value of 4 to be inserted it works?
I have been working on a project for 2 days and this is the last piece to get it to work, can anyone point out where I'm going wrong. P.S I have tried giving the colum a date format but unfotunately the format is american and I need it in english to compare with something else I'm working on.
How can i get the last inserted record in an ASP ACCESS combination? Code:
View Replies View RelatedI'm looking for tutorials on how to upload a file (.doc or .pdf),insert in database and retreive from database. i'm using pure asp and sql 2000.
View Replies View RelatedI'm getting a syntax error when I try to run this SQL Insert statement, can anyone tell me what might be wrong? Before I was getting a data type mismatch error then I removed the ' quotes around the intPhone variable. The error occurs on the line after the SQL statement.
strSQL = "INSERT INTO candidates (Name, Grade, CivilService, Branch, Department, Sector, Town, EmailAddress, PhoneNumber, LunchReq, SpecialReq) VALUES ('" & strName & "','" & strGrade & "', '" & strCivilService & "', '" & strBranch & "', '" & strDepartment & "', '" & strSector & "', '" & strTown & "', '" & strEmail & "', " & intPhone & ", '" & strLunchReq & "', '" & strSpecialReq & "')"
Set rs = cn.Execute(strSQL)
I have a 2 asp pages for a registration form. The first one is where the user types the data, and the second one has a form that requests the data from the 1st one and then sends it to the database. Both are sending the data correctly (I've seen it on the error page) but it's not feeding the DB.
View Replies View RelatedI have a website I am working on that I did not create. It is ASP and SQL based. There is a content management system created using ASP and saving in the SQL server database. A user can enter a news article into a big text box/area, and choose to add an image. The text and image are stored in the database via ASP and pulled out to the website via ASP.
The image shows up in the website to the top left of the article. I need to make it so the user can enter an image where their cursor is in the paragraph (like a word document) and have it also show up there on the website. Any ideas?
I have a problem. I have ASP code and Javascript code. Now, I want to access ASP code inside javascript code. Here is the ASP code:
View Replies View RelatedI have a form which the user fills and submits.i have insert statement there.
When i submit the form to itself ,the values get submitted and inserted in DB easily.
<form method="post" action="Infoviewagentver212.asp" name="form">
Now when i want the user to hit submit and go to other page i change the above to:
<form method="post" action="newpage.asp" name="form">
but here what happens is my values are not getting inserted in the DB??
How do i do this?
This is on my HTML page
<td align=center>
<textarea cols="85" rows="7" name=""Problem"></textarea>
</td>
User" enters information into this box.
If they use either a quote or double quote, but SQL statement bombs. Is
there a way quick way to fix this beforehand?
Conn.execute ("INSERT INTO PROBLEMS (Problem) VALUES ('" & Problem & "')")
How to insert fields in a table by using SQL?
View Replies View RelatedJust like to know if I am correct and no problems in this scenario:
I have page where the user clicks a button to save some information >>
gets directed to page 2 where a value gets returned from a recordset and the form is inserted automatically upon loading with the value (sequential for the database table) >>
the user then gets redirected to page 3 upon insertion into the database, if I use 'Select Top 1 ......' as a query to retrieve some information on this page am I sure that this is the correct record just inserted even if 2 or more people are saving at the same time?
This is my code, for some reason, when I use this exact code it doesn't update my database, but if I use the next section of code it does. Anybody knows why that when I use two different "Insert" in If Then End If, it doesn't work? Oh and I did try the "If PID = 105 OR 151 Then" alone and it works well. Code:
View Replies View Related