have a look at this code and see if they can spot the error. I've been looking for sometime but I'm blind to it - I have a feeling it might be something to do with the ID field? The connection appears fine so this is unlikely to be the cause .
View Repliesin my asp file i get the following error
Error Type:
ADODB.Recordset (0x800A0CC1)
Item cannot be found in the collection corresponding to the requested name or ordinal.
/emirate/view.asp, line 175
my database is access,i checked both data base as well as the coding,both field names are correct
my sql is only this
sql= "select * from MasterEntry"
I know what this error is, all fieldnames have been verified and reverified. Not sure why it is happening. Here is the SQL statement
strSQL = "SELECT Problems.TicketNumber, Activity, ActDate FROM Problems LEFT
JOIN Resolutions ON Problems.TicketNumber = Resolutions.TicketNumber WHERE
Problems.TicketNumber = " & Ticket & " ORDER BY ActDate DESC;"
<td><% = rs("Problems.TicketNumber") %></td>
I'm getting this error working on a RecordSet that is filled by a LEFT JOIN query. Everything works fine, until an attempt to access data from the child table in the RecordSet when it doesn't exist.
Which results in "Item cannot be found in the collection". Is there a check that I can perform to see if a RecordSet item exists before attempting to access it?
I am receiving the following error when I try calling a variable back from SQL Server 2005.
**********************
ADODB.Recordset error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal.
/etms/WorkFlow/ProductWF/Components.asp, line 193
**********************
The query works fine when i execute it from SQL server but when I integrate it into ASP it doesn't work. Can anyone please shed some light on this. Code:
the query works sometimes, but then after a few it wont work. Its a DB2 database, just creating a report page.
Error:
ADODB.Recordset error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal.
Code: error is on line 93 which reads: Code:
This is my SQL Query, but I get the error message. Item cannot be found in the collection corresponding to the requested name or ordinal.
/spmanagerdownload/downloadadmin.asp, line 444
I'm running a stored procedure that inserts a record into a table then
returns the Identity field value. I've done this kind of thing plenty of
times in the past, but I'm obviously doing something wrong this time..
I've tested the Stored Proc in QA and it works fine. The SQL code runs OK in
ASP (iAffected = 1 which shows the record is inserted), but when I try to
query the resulting recordset, I get an error:
"Item cannot be found in the collection corresponding to the requested name
or ordinal. " Code:
I am trying to put a search by product name function on the following page, i think i have everything write but for some reason the page always says product not found as if the query is not getting past Code:
View Replies View Relatedhow to get many item in LIKE funtion?
Dim count integer
Dim part() as string
For i = o to i =count step 1
Sql = "SELECT TOP 5 T1.A,T1.B " & _
"FROM Table1 " & _
"WHERE T1.A LIKE '" & item[1]& "%' " & _
But the array [1] got error. How to get the array?Please advise me for the above problem.
I have run into a peculiar problem and need a little shove to solve it.
I have an ASP app that tests to see if the browser allows cookies. Complains
if cookies are off, otherwise proceeds to a login page.
Using MS-IE 5 or higher - works fine
Using IE5 or Safari on a Macintosh (OS 9 or 10) gives a page not found error
when trying to detect the cookie setting.
The ASP code use Request.Redirect. I made some htm pages to allow debugging
of the redirect and get the same failure.
I could really use some suggestions for making the Mac machines work.
i got an error saying file not found 404 when redirect to html page
and i ensure that the file is found in the same directory and in the database :
response.redirect results("Url")
where Url is the column name in the database that contain the page name
I'm getting a truly odd error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] The search key was not found in any record.
/admin/test/articles.asp, line 286
Code:
Why do I get 'object could not be found' or 'invalid object name'?somebody could explain and what the solution for this.
View Replies View RelatedHow to find the File not found error in Javascript. My problem is When click the help image button, i want to display the help popup window to the corresponding page, if it is available.
If the help page is not available for the particular page, common 'No help' page should be displayed in popup window. How can i find the file not found error in javascript.
I have moved an asp application from one IIS server to another and now having problems with the app on the second server. All I did was to move the folder as it is.
Here is the error:
AnnuityRate-Annuity.CalcAnnuityCommonCode E:InetpubwwwrootpensionchoiceForms-Annuity.APIAnnuityCalculationASP error '800a0035'
File not found: AnnQ32.DLL
/pensionchoice/forms/include/commonRosDLL.inc, line 134
My knowledge in ASP is very low - so please suggest. I tried to do a REGSVR32 on the dll with no luck.
We have an application that uses WinInet and ASP to transfer files from an application server to a web server via an FTP component based on WinInet. An ASP page calls this component to transfer the requested file then opens the file and loads it into ADODB.Stream in order to download it to the user.
Things work fine up to the point where the Open|Save|Cancel dialog appears. If the user clicks Open or Save, a fair percentage of the time, they get a "File not found" error displaying the file name followed by a bracketed number, e.g. file[1].txt.
I have few asp pages, in each i connect to the DB, same con name in all of the pages.
one page return error, as above, I had these pages working allright before, but i had to
reinstall the IIS 5.1 because it was corrapted after installing SP2, and now rose this error, what could be the reason, do i have to change settings? of what? the wwwroot folder?
i've made a calendar that uses newsitems from an access database.
Every newsitem is a record (newsID, date, title, fact).
When the page is loaded for the first time a visitor looks at that page, I want to set the calendar to the newsitem that is closest to the present, but lying in the past. So, today we are the 13th of October. In the database, i've got two items with date "the 2nd of October" and "the 25th of September". The query should return me the 2nd of October. Of course, when that newsitem did not exist, then the query should return me the 25th of September.
I want to reverse a folder listing, can I referre to a collection with a
item number like in arrays?
ex:
set fs=Server.CreateObject("Scripting.FileSystemObject")
set fo=fs.GetFolder(smp)
for each subfld in fo.subfolders
..
..
next
can I do the FOR statement reverse without putting all folder names into an
array.
i have a view cart page which shows remove an item and remove all item but i also wish to have add item function so i can add quantities for an item in the view cart page. i am not sure the right code for it. below is the remove item code.
if i wanna have an add item code, is there an amendment to do the code below . cos from what i see, its like u can do the opposite function for the code below to add items. Code:
i have a list form object on my page:
<select name="item" size="5" multiple="multiple" id="item">
<option>something here</option>
<option>something here</option>
<option>something here</option>
<option>something here</option>
<option>something here</option>
<option>something here</option>
<option>something here</option>
<option>something here</option>
<option>something here</option>
</select>
but i cant find anywhere about how to get at these elements when the forms been submitted. for example, if a few of the items have been select, it returns a commar delineated line, but how can i get at, say the 3rd item selected or find out how many items were selected?
i have two dropdowns(dd1 & dd2) in the same page. dd2 items depends on the item index from dd1.when dd1 is onchange, the form will get the dd1 index value and then do a search in DB for the results to be input into dd2.How can i achieved that?
View Replies View RelatedIs there a way of creating a sent record in a outlook users account. I am sending the mail through our exchange SMTP server.If this cann't be done.
View Replies View RelatedI want to skip an item in a loop, and go to the next item, e.g
[vbs]
For Each bla In ble
If bla = "skip" Then
'Skip to next item
End If
Next
[/vbs]
Is this possible, and if so, could you show me how?
how can i add item/s to a dropdown from another page. i am currently using window.opener to initial the link between the 2 different pages. i have 2 pages, main and sub page.
when i clicked on a button at the main page, it will pop out the sub page. when i clicked on the add button at the sub page, it will add the item into the dropdown list at the main page on the fly.
if it is possible to narrow in on an item within a listbox of states. For example, right now if I type "W", I will immediately drop down to those states beggining with "W".
However if I type "WI", I go to the top of the list with those states beginning with "I". I would like to continue to zero in on the state by dropping down to those that begin with "WI". Is this possible and if so, how do I go about doing it?
I'm doing an e-inventory system using Dreamweaver MX, ASP. The problem is that I want the system deleted the item that user already choose to use, for example in the store they got 12 keyboard. then when user choose to take 2 keyboard, I want the system automatically state the item left in the store was 10.
View Replies View RelatedI've got this listbox and this text field on an ASP page. Now I want the item I click on in the listbox to appear in the text field and I can't find the code nowhere for what seems to me such an easy thing to do.
View Replies View RelatedHow do I make an item the selected one based of the info I get from a querystring.
ie:
1 - I pass in a query string containing the color "blue"
2 - I have a drop box that has 30 colors in it (inserted manually)
3 - How do I code to have blue the selected one?
if i have four option buttons all named r1, what will request.item("r1") give me??.. the "value" of the selected option button or what??..
View Replies View RelatedHow can I in a loop do something to every second item? my code is (extracted from within a loop) :
Code:
dblTotalPrice = cDbl(dblTotalPrice) + cDbl(qtyprice)
itemsincart=itemsincart+qtyselected
shipping= itemsincart*shippingrate
Discount='need to figure out discount
TotalPrice=dbltotalprice+shipping
What I need to change is that for every 2 itemsincart the discount will be half of the second item.
I am taking over a script that was created by someone else. I am trying to do a search for one card that is listed in two different categories, and I only want it to bring the card up once.
<input name="Order card" type="button" id="Order card" onClick="MM_goToURL('top','http://home.amm.org/cards
/search.asp?title=DG006');return document.MM_returnValue" value="Order card">
Right now it is bring up a page with the same card listed twice. Which is correct, cause it is listed in category 2 and in category 4. I want it to bring up the card from category 4 with the title DG006. And only show the card once.