I'm starting in asp and I'm trying to do a simple sql query to display a number of records on a page using the limit clause. I keep getting a syntax error in my from clause. Here's what I'm doing:Code:
rstProd.Source = "SELECT * from TBL_PRODUITS LIMIT 0,10"
I have no problem using this clause with PHP so I was wondering if there's some restrictions with it in ASP??
I am trying to modify the code in an existing ASP page that displays records when it runs. The code in the where clause I wish to change is as follows:
where_clause = where_clause & "[DateWOCancelled] Is Null And IsNull([ACT_IS]) And ([PROP_IS] < Now())"
This works fine, but I need to have the clause also evaluate another field (Rev_IS) to see if it contains a date, and if it does check to see if it is < Now(). If the Rev_IS is not null, I don't care any longer about the date contained in Prop_IS. I only want to evaluate if Rev_IS < Now().
I am using the DateDiff function to compare two dates in a query on a page. I then need to use the "Expression" created from that DateDiff function in a WHERE clause calculation, but it is not working correctly.
The page loads successfully with thre recordset populated, but the WHERE clause has no effect on the data. I'm guessing that I am doing something very wrong, but I have been staring at this for hours with no avail!
Got a bit of code, which I want to loop through, unless the current value is "", in which case I need it to skip to the next one, but how do I do it?
Response.Write "<br />" & vbCrLf For Each strItem In Request.Form If strItem = "" THEN 'these next two lines, I only want to be processed if the above does have a value in it Response.Write "-" & strItem & "-" & vbCrLf Response.Write "-" & Request.Form(strItem) & "<br />" & vbCrLf End If Next Response.Write "<br />" & vbCrLf
I am trying to connect Flash with ASP. I did few examples successfully, but I am stack on this one and I get error from the sql statement. I dont see anything wrong with it. The code is:
set conn = Server.CreateObject("ADODB.Connection") conn.ConnectionString = "Driver={Microsoft Access Driver (*.mdb)};DBQ=" & Server.MapPath("example.mdb") conn.Open set record = Server.CreateObject("ADODB.Recordset") query = "SELECT * from TABLE WHERE NAME= " &action1 record.Open query, conn
The error which I get is: Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
When I create a ADODB.RecordSet object and then try to loop through the results, everything works fine, unless when I am done looping through the results I need to call the movefirst on the recordset object. If I happen to have used an ORDER BY in my SQL, it bombs out. Code:
I am trying to design a page that displays data from a query in groups of a field in the where clause and then displays a 'total' per each group. Code:
i got a field named register_date, its input a table named member when a user register in my system, What im trying to do is i want to display daily registration in seperate table, anyway the database im using is mdb file, and data type for register_date is data/time.
so below is my coding, but i can get the table to be displayed, can someone tell me what wrong with my coding? Code:
I have created the following code to create the recordset rsToBeApprovedLocalItemID. Unfortunately, the for next loop works properly only on the first cycle. The response.write(arrToBeApprovedCatSub(0)&arrToBeApprovedCatSub(1)&"<br>")works for each loop but the SQL statement sqlToBeApprovedLocalItemID returns a populated recordset only on the first loop.
On subsequent loops it is empty even though the arrToBeApprovedCatSub(0) and arrToBeApprovedCatSub(1) are alive and well. What's going on? This is truly weird behaviour. I have not come across something this funky before. Code:
I am using a Relational database for my site and i have the following tables:
FIXTURES, GAMEDATES
the fields in FIXTURES are:
GameDate Home Away
(All of the above are numerical fields)
the fields in GAMEDATES are:
DateID(integer) GameDate(#Date Field#)
What i have done is in the GAMEDATE field in the FIXTURES table i have used the ID number of the date that i wish to assign to that record - using a LEFT JOIN to display the actual date that is pulled from the GAMEDATES table (That which corresponds to the relevant id used in Fixtures)
The problem is that in some of my code i want to display records using sql and sometimes in the where clause i use the following:
WHERE Fixtures.GameDate<=(Date())
obviously meaning WHERE GAMEDATE is LESS THAN or EQUAL to TODAY.
The thing is when i use the join it does not use the where clause and displays all of the records in the FIXTURES table.
Does any one know how to get around this, i have not received any error messages it just isnt displaying the right data
Why is it that whenever I press "search" it's saying:
SELECT * FROM bible WHERE verse_spoke LIKE '%jehovah%'%' AND ( spokes = '004') AND ( recordType = 'gn' OR recordType = 'is' OR recordType = 'ro') Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in query expression 'verse_spoke LIKE '%jehovah%'%' AND ( spokes = '004') AND ( recordType = 'gn' OR recordType = 'is' OR recordType = 'ro')'.
I am trying to figure out how to create a registration form that can limit that amount of people who are signing up for an event.
The form has to take in consideration the number of guests the attendee is bringing table seating location. How can interact with the database in order to do this. I know how to create a form and send that information to a database.
I have a web application that query and insert record into a remote DB2 database. It has an ODBC setup pointing to a remote UNIX DB2 database server. The problem that I ran into today is that IIS created too many DB session which max out my limit at the DB2 side. I see a lot of "mtx.exe" when I check the db applications of the db server.
Even thought I close my db connection after each query, it seems to stay around and occupying a session on the DB server. So I ended up with a lot of people with failed insert or login because there are no more available session on the db server.
So my question is how can I set a limit on the DB connection? How can I make sure "mtx.exe" disappear after a query? What other option do I have?
I've made an ASP page that use a VB6 ActiveX EXE with a CreateObject. Initially, this page work fine. The object’s reference created with the CreateObject are saved on a session variable for reuse it on many page. When many users call this page and many instance of the ActiveX EXE Object are created, the CreateObject command fails with a 429 error (ActiveX component can't create object). The class (in ActiveX EXE) are MultiUse, then only a single EXE are running. Terminating the EXE with Task Manager then the CreateObject will get to work again.
I'm pulling product descriptions from the database and would like to limit the number of charcters that is displayed. Also, I'd like to add ... at the end.
Something like: This long text is boring blah blah blah
I've got a small problem with my ODBC query that I'm unable to resolve by searching google. I need to limit my query so that it only returns a certain ammount of rows, for example 10.
I have tried the MySQL type query and that failed to work. Then I found an example on the internet in what looked like a weblog which said use "select top 10 * from tblname". Although this fails to work it does limit it when it feels like it. Often I'll get 11 or more results, but if I decrease the 10 to 4 for eample it still returns the same 11 or more rows.
its there anyway via asp i can get around the 255 character limit for url strings.. its for use in a cms/eshot system. on a mailto: link i want to create a string of email address for the client and then send from there own inbox.
I am having a problem uploading large files through ASP.We have several sites in IIS on 1 application pool.I was able to use MetaBase Explorer and increase the AspMaxRequestEntityAllowed value in /LM/W3SVC, and for at least 1 of our sites, it worked. Unfortunately, on our Intranet site, the error persist. Does anyone have any idea why? We do have ASP.Net installed on this server, but the error is explicitly ASP.
Searching for answers I found that another value, MaxRequestEntityAllowed, could also be responsible. Unfortunately, this value is not anywhere in our metabase.xml file, and I am hesitant to simply create it.
I think an url variable could be limited, maybe someone know the maximum length I can use ? (I try to send an html code with the get method, maybe some symbols could not be accepted in url).Is this length limited for a variable or for the url string ?
We're running Windows 2003 Enterprise Edn.with IIS 6.We'd like to limit the access to two of our ASP apps to those who are on the domain--without using the integrated domain authentication popup.
In other words,we don't want users on the domain to have to log in every time (or even once);those not on the domain would not see the site at all. Is this possible?How?
I have a Visual FoxPro table with Memos fields, and when i insert into the table a value that cames from a TEXTAREA field on a form, give me an error. Why? if the table field is MEMO?
is there any reason why i can view a page at work (which is on our server) yet when i view it online from the domain name (some pages are hosted, some are running off our server) i get the message: "Redirection limit for this URL exceeded. Unable to load the requested page. This may be caused by cookies that are blocked."
I have exceeded the length of the URL limit. I have a form where I send data using GET method. Now I have to change method of posting data into POST method. But please tell me how to get data after passing them, because when I call