I have some arrays multiples arrays
like
(,1,2,3,4,5,6,9) and (lucas, john,nathan,mary,..)
I was trying to have a output like a list
ID Name
1 mary
2 John
.. ..
However how can i do this? I tried "for each" loop but it repeats one field twice
I need some help with a calendar loop. the calendar works fine, i just need to compare the CurrentDay in the calendar to my records. connect to db and pull records into an array. ASP Code:
View Replies View RelatedI'm trying to build a piece of code that loops through the Request.Form collection, takes the "name" part of the name/value pair of each Item in the Request.Form collection, splits them into an array based on a common Form Field naming convention, and outputs the result (the full code will do much more - I'm just trying to build this in "baby steps").
Ex:
If my Form field names are:
t_FirstName
t_LastName
i_StateOfResidence
I wrote this code to loop through these, split them based on the underscore character ("_"), and output the results: Code:
I'm trying to pass a parameter from a for loop to the nested while loop
but only the first counter is passed. Here is the code:
I have a recordset that I loop through all of the data within a table, within the same loop, I am trying to add another loops that pulls information from the first recordset to base the second recordset off of: Code:
View Replies View RelatedI dump the entire recordset into an array:
If not rs.EOF Then
aEmp = rs.GetRows()
Contents of the array are in this order:
EmpID,EmpName,Indent,Sub_ID,Lft,Rgt,MgrID, LastName
This query sort on the basis of Lft and Rgt columns.
The name of the array is: aEmp.
My question here is how can I get only the LastName from the aEmp array into another array so that I can sort the names alphabetically and then display the employees in the alphabetical order.
Or is there is another way I could this by using the same array while keeping the lft and rgt sort of the query? If I sort based at the SQL query level, I can see the names sorted by the lft, rgt and lastname, but since the lastname is at the end of the sort list - it does not appear alphabetically.
In working with arrays, I have found that I am unable to dimension and array
with a variable that has an integer value but I can redimension one this
way. I haven't see any information that tells me if this is a requirement,
although it appears to be because I get an error if I try it.
Ex.
Dim b
b = 10
Dim a(b) ' this errors out but
Dim a() ' this
Redim a(b) ' works
Code:
I want to create a new array called arrNames2 and copy contents of arrNames to arrNames2.
I then want to loop through my db and add more names (while going through the loop) to arrNames2. What is the best way to do this? Do I have to keep redim the array wehn I add more names?
I have a case statment like
select case code
case "01"
ups_desc = "OPTION1."
case "02"
ups_desc = "OPTION2."
case "03"
ups_desc = "OPTION3"
case "07"
ups_desc = "OPTION4"
case "08"
ups_desc = "OPTION5 "
case "11"
ups_desc = "OPTION6"
case "12"
ups_desc = "OPTION7"
end select
I then have table called "users" which has the following
id
UserID
Code
now the trick
I want to loop through the recordset of the user tables and populate a drop down where the code from the case and the user table are the same.
Something like
do while rs("code") = code
<option> This then is populated based upon the loop(I have this code)</option>
loop
I need to insert recordes into a db based upon a number returned in a form
Somerthing like
AddRecords = Request.Form("NumberOfRecords")
Count = 0
if Count < AddRecords Then
Do while Count.eof
SQL Code....
Count = Count + 1
Count.move next
Loop
End If
i have 2 tables (A & B) with date records
now i loop table A and then table B, the output will be table A in the front
and table B in the back.how can i make the output show by date in both tables altogether?
do i need to combine tables before but the number of records is over 100K
which may spend a lot of processing power?
on my classifieds site i would like to create a simple ads system. i currently have the ads site made but need some advice.
on my classifieds site i would like to display the ads down the left hand side.
however i dont want to over display ads.
if there is not many items listed i only want a small amount of adverts shown on the left hand side. however if there is lots listed
i would like quite a few adverts listed.
otherwise i would have a big list of adverts and only a small number of items listed making a big blank space on my page.
i am guessing this would have to be a loop or something.
the code i am using to show the text links is <%=adurl%>
I am using a for loop in one of my asp page. Could someone let me know if I can do the for loop as follow:
[code]<% for i = 1 to 5 %>
my html code
my html code
my html code
<% Next i %>
instead of
[code]<%
for i = 1 to 5
Response.Write "<input name = 'id'"&i&" type='text' value = "&id& ">"
Next i
%>
I am using ASP and need a DO LOOP to get some info back from the db. but the asp reads the first do loop but does not read the second one ......
View Replies View Relatedis there any function or statements that work the same as the 'break' statement in C++ language?
for example:
While Not rs.EOF
If rs("LoginID") = userId Then
break 'what shd i use for ASP???
Else
rs.movenext
im writing some script to add records to my db. but if a value thats about to be added exists, then dont add that record.for example: if i want to add 7 records to my db with the values 1 - 7, but the db already has 3, 5 and 7, then it should only add 4 new records (1, 2, 4 and 6).
i have a record returning all records form my db, and an array with the values i want to add. i want to loop through my recordset of all existing entries, then for each loop, start another loop to see if the value exists, and if it doesnt , then add a new record.
How to use the for loop or do while loop to create the age range from 10 -100 to let the user to select from the form object - list/menu by using asp? The coding below is just a concept. For example
Response.Write("<select name=""select"">")
for (a=0; a<101; a++)
(
Response.Write("<option value=""" & age & """>" & age & "</option>")
)
Response.Write("</select>")
I'm trying to create a page where images are displayed based on an id in a sql table (basically its an unlit candle until a value in the id field exists). I'm not getting an error with my code below - but its not working right either. Code:
<% If rs("my_id")="2" Then Response.Write "<img src=""images/07.jpg"" width=""56"" height=""97"" alt="lit candle">"Else Response.Write "<img src=""images/UNLIT_07.jpg"" width=""56"" height=""97"" alt=""unlit candle"">" End If %> ...
I have a SUB which has input variables. If I run it once its okay, but I need to include it in a for....next loop. Can this be done ?
for i=0 to 100
call mySub(arr(0,i))
next
sub mySub(var)
.....code
end sub
I am getting this error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]Numeric value out of range
(null)
/database/data_entry.asp, line 90
Line 90 is shown below...
// count the total records by iterating through the recordset
for (rsProducts_total=0; !rsProducts.EOF; rsProducts.MoveNext())
{ <---- Line 90
rsProducts_total++;
}
This is an access database, connected to via a DSN. Any help will be muchly appreciated! I'm stuck on this one.
I'm using three loops on a page and would like to set the loops individually to start at either 0 or -1 based on a condition. As an example, I would want the loop to start at either -1 as shown or 0.
Dim r
For r = --1 to Session("TotalRowsF")
code...
Next
Or, based on the condition it could be
Dim r
For r = 0 to Session("TotalRowsF")
code...
Next
I can display some text 5 times using a loop and i want to pass those printed
values to another page when i clicked send button.
I'm trying to give the variable sStart a new name on each loo
EG
sStart1 = value1
sStart2 = value
however the following piece of code doesn't work
set oNodes=xml.selectNodes("/Project/Tasks/Task/Start"
for each oNode in oNode
sStart=oNode.tex
response.write("<BR>"
for i=0 to 10
response.Write(sStart(i)
nex
next
I've been coding now for around 3 years. A year ago, I inherited a forum from a friend who didn't have the time to run it anymore. It's an old, very old, version of the WebWiz template, much modified. So modified in fact that upgrading to a newer version is impracticle, the best I can do is add features that you'd expect a forum to have these days. Code:
View Replies View RelatedHere's my problem (aside from the fact that I'm a newbie.) I'm using ASP to call an Access database with four separate tables. The first three are working perfectly. The fourth is a little more tricky. I'm pulling the information based on a registration number (entered via a form). In the fourth table, each registration number is listed multiple times with production information for each year and quarter. For example:
(reg number, year, quarter, # lbs, amount)
A008374 - 2001 - Q1 - 840 - 232
A008374 - 2001 - Q2 - 520 - 164
A008374 - 2001 - Q3 - 8256 - 3368
.
.
.
etc.
I want to use a Do While...Loop (print the information while the registration # is equal to the one entered) to print out the information for each entry. Code:
what's causing the error "loop without do"? whenever i put a do in it keeps coming up with more errors. Code:
<table border="1" width="100%" cellspacing="0" cellpadding="0" bordercolor="#E8E8E8">
<tr>
<%Do Until RS1.EOF%>
<td align="center" width="25%"><font face="Trebuchet MS" size=2 color=<%IF RS1("Status") = "Booked" THEN%>FF0000<%ELSE%><%END IF%>><%IF
RS1("B.Room") = "Booked" THEN%><a href=blah><%=RS1("B.Room")%></a></td>
<%RS1.MoveNext%>
<%
loop
%>
</tr>
</table>.
I have a form with a select object ("Select") that will allow me to select multiple values. I put the following code in my asp file to display the values:
for each Item in request.form("Select")
vValue = request.form("Select(Item)")
response.write(vValue & "<br />")
next
The above code produces only multiple blank lines for the selections.
I'm trying to perform a loop to display the contents of my DB, the only issue is that I would only like to display 10 results maximum this is relatively easy but what happens if there are less than 10 results in the DB. If I was going to do a :
Do Until objRS.EOF
Then it would display the full records, likewise if i put a counter on the loop then it will run into errors if I have less records than the count.
Im trying to sort out what should be a very easy task, but I'm having a blank spot. Im pulling a distinct letter out of a DB and i want to be able to sort it A-Z inclusive using next and/or loop. then use them as a navigation aid.
View Replies View RelatedI am trying to do a loop based apon the number input into the form. Each "Section" should output some HTML code (in echo'd format).
If you select 0 sections, the header and footer are generated, but no section, if you select 4 sections, the header and footer are generated, with 4 sections. Here's the code:
I am doing a scheduling system. The concept i have but i am weak in my programming, therefore i hope that u all can help me on this.
i have a capacity (uph x shift x 7.17) and orderperday (total orderqty per month / total shift per month)
the thing that i am not sure in is, i want to do a comparison it is becoz there is a capacity limit per day. i cannot afford 2 produce overlimit. so if the orderperday > capacity then orderperday - capacity = balance. balance will be bring forward to the next day to produce. then the comparison will be done again. i am not certain on how to do the looping in this context.
I am running a for loop but i dont know how many time i will need it to loop and the data may vary, is it VITAL that the syntax is For x = 0 to 5 or is there a way of stating to complete the action until the end of the table. I was thinking of using the EOF function but i am using a variable x to group the data together in the table so it doesnt go all muddled up.
Any suggestions?
I am some what new to asp and programing. I have put together this code, so I can send out a mailing list to some users. The code looks and seams to run fine. But I dont receive any test messages during when I execute it. it's like the SMTP sever is not sending the emails....
View Replies View Related