I am from predominantly PHP background and have only slightly dabbled in ASP before.
I am trying to find a simple HASH function that is ideally built into ASP such as MD5 (which isn't), it needn't be very complex just a simple checksum is all that is required. The function is only required to product a checksum for a small string of around 20 characters max.
I need to protect my passwords with a hash function. While searching through this forum and the Internet I found a few, but I am not sure which one is better or if there are other ones?
View Replies View RelatedIs there a function built into asp that will create an MD5 hash from a string or any other hash functions for that matter? Do i need to download one from somewhere?
View Replies View Relatedif there is a way to create a hash table with asp. I also have java object that accepts a hashtable and then parses out the data.
View Replies View RelatedI need to generate an MD5 hash in ASP, not ASP.NET, and have that hash be
the same as what is produced by the .NET MD5CryptoServiceProvider, any
ideas?
I found a few examples that return MD5 hash as hex string, how can I resolve
that with the byte[] that .NET MD5 implementation gives me?
What's the difference between private and public functions in ASP? When should I use either?
I am using a simple guestbook /portal and i want script to send mail to the thread owner when someone reply his message.
this is the send message code ....
Can I define a function inside a function. e.g;
function abc()
function xyz()
....some code.....
End Function
End Function
I googled this but can't find any related topic.
I want to use the instr function, but return results from it depending on surtain functions, I can't realy explain so I'll show my example:
I have a string in wich some word I want to find might be in diffrent Capital Letters order, I want the Instr function to return all the values of the place of that word (avcourse I'll run a for and increase the starting point of the Instr func until it returns 0). The instinct thought is to use the Lcase or the Ucase functions, but in this case I don't know how to use them. In the same Idea I wanted to use the Instr Func with the trim Func, But Its realy the same principle if I just understood how to do so.
I am trying to call a function in asp to check to see if a varibale has a value stored in it if there is nothing wite the value NA into it. My code is
<%
Function NullValues(userField)
if userField = "" then userField = "NA"
end function
AccountNo = ""
Name = "sam clowes"
email = ""
AccountNo = (NullValues(AccountNo))
Name = (NullValues(Name))
email = (NullValues(email))
response.Write AccountNo & "<br>"
response.Write Name & "<br>"
response.Write email & "<br>"
%>
When I run this code ALL the variables are blank and nothing is output
the function
<%
Dim objXML, objXSL
Function ShowXML(strXML,strStyleSheet)
Set objXML = CreateObject("MSXML.DOMDocument")
Set objXSL = CreateObject("MSXML.DOMDocument")
objXML.load(Server.MapPath(strXML))
objXSL.load(Server.MapPath(strStyleSheet))
Response.Write objXML.transformNode(objXSL)
Set objXML = Nothing
Set objXSL = Nothing
End Function
%>
calling the function in an asp file
<%Call ShowXML("http://msn.foxsports.com/feedout/syndicatedContent?categoryId=142","nhl/xsl/news/teamNews.xsl")%>
the errors
1. the http:// part
2. and the ? mark
the error message says that the path has been typed wrong.
the user can key in variable A and B
then C is auto generated by C = A / B
so how and where should i write the C function??
Possibly a very simple question but how do I get a value out of an XML document so I can play with it in ASP
E.G: <Name>Tom</Name
How do I pull the work tom into asp
I am using the now() function to be displayed on an email after a form submission has been sent. The problem is that the server is not in the same timezone as I am for the result. How do I adjust the hours on the now() to allow for this please ?
View Replies View RelatedI know the basic difference between a subroutine and a function is a
subroutine performs a task and a function performs a task and returns a
value. The Call keyword is required when using parens with subs with more
than 1 parameters. Parens around values passed are ByVal vs ByRef and is a
waste of processing if passed ByRef for no reason.
I am told there is no reason to ever use a subroutine as a function can be
used even if it doesn't return a value. While this appears to be true, is
there any reason why it's ever a bad idea to use a function, instead of a
subroutine, that doesn't return a value? Are there memory, performance,
etc. issues?
I am trying to locate information on how to call a sub within VBScript on an
ASP page but I can't locate generic information. What I want to do is
generate a page that will stay up but the information on it will change
based on a series of drop down boxes. I need the first drop down box to call
a second dropped down box based on the state that is chosen then city and so
on.
I have a column in the table which contains 2 full names seperated by "&" (e.g: Joe Smith & Jeff Scott) I want to display only the first names of the whole record in an asp page. Is there an asp function using which i can do this?
View Replies View Relatedim using the mod function to create a calendar for me, which everything works perfectly, all is totally well with that!
but...when i use the mod function it churns out this loooooooooong string which is the whole table...
if there is some way that i can insert hard breaks IN THE CODE ITSELF.
I used to be quite an experienced ASP programmer but I haven't used it for a while
I’m trying to do something that I remember as very simple I'm trying to check that the value of a form text box is numerical using the isNaN function. The code I am using is:
<%
quantity = Request.Form("number1")
if isNaN(quantity) = true then
Response.Write "Your input was not a number"
else
Response.Write "Your input was a number"
end if
%>
All I get is a NaN type mismatch error.
Is there a function to check to see if a string contains a space
Thanks
I was just wondering when using the mid function how does the assigment work when the length is longer then string itself? For example
test = mid(12345, 1, 10)
What would be the end result of test?Would it be 0000012345 or 1234500000 or 12345?
When I create a single character string
var str = "A"
'convert to ascii
num = asc(str)
Response.Write num ' 65 shows up
'when I have a whole string
str = "hello"
str = mid(str, 1, 1) ' return 'h'
num = asc(str)
'I get an error:
Invalid procedure call or argument:'asc'What can be done to fix this?
I've an array to store alphabets, in my code...in a random order. How can i use the Asc() function to get the equivalent Ascii of each alaphabaet of that array....
whenever i use ,
for i = 0 to NoOfElements
Response.write Asc("ArrayName(i)")
next
it displays 65, "NOOfElements" times (ascii of A)...on the other hand..i can't write
Response.write Asc(ArrayName(i))
since this shows some error...How can i solve this?
Depending on some situations, I or the user, need to execute a function (e.g., login, sending email, etc...) and then continue from the original place. How can I make one function to be available from any page from my site?
View Replies View RelatedI have a problem with max() function. The SQL is as follow SELECT max(group_no) as group_no FROM doc_groups. if I run the sql in MS SQL server, it will return correct result. However when I run in ASP file, there is no record return. I check with RecordCount property and it return -1.
View Replies View RelatedDoes anyone know how to use the Excel PV Function in an asp page? Is it possible at all? I know how to use it in .Net but not in ASP.
View Replies View Relatedi need to write sql statment to compeare the first three letters btween input user and a field in a database, i used the Mid function but it seems there is something wrong ..
dim str1
str1= Mid((Form1.SiteName.value), 0, 2)
<% strSQL = "SELECT EQUIPMENT_ID FROM ne.equipment_view WHERE Mid([EQUIPMENT_ID], 0, 2) = '&str1&'" %>
by the way i use dropdown list for user input ....
I need function that will recognize URL in some string. For ex. somebody in forum sends some text which is in variable TEXT. I want a function to look at it and if it finds www... , http://... or https:// - he has to change it into url link.
View Replies View Relatedin vbscript:
Int(11.4)=11
What function in JScript like this function?
I'm getting error in Dir$ after run this code using IIS. Can anyone help me to solve this matter? Code:
If (Mobile1.MSGType = 2) And (Dir$(Mobile1.MSGPictureName) <> "") Then
Image1.Picture = LoadPicture(Mobile1.MSGPictureName)
Else
Image1.Picture = LoadPicture()
End If ..
is there a vb function that I can use to copy chars 1, 3, 5, and 7 from a string of 7 chars?
View Replies View RelatedHere's a tricky question for you all, is it possible to have a session or global function?
Page1.asp
<%
Function Hello()
Hello = "Good Bye"
End Function
Page = "Page2"
Server.Execute(Page & ".asp")
%>
Page2.asp
<%
Response.Write(Hello())
%>
However, When I run the pages, nothing is returned. Without using page includes, is it possilble to create some sort of global function?
I have 3 frames in my page. When i log out i would like to replace my framed page with another page. I tried using the link below but nothing happens. Code:
View Replies View Related