I have this dynamic array(shown below) that I need to match to values (1 - 10) that I am returning from the database via DSN connection object.
The values I need to match are on the same page (in their own table) but I am not sure how to match up the array indexes to these values. I want to be able to display the array result as part of or nested in another table. Code:
I am having 2 problems in asp.
1. I want a form field which retrieve data from Sql database and when button pressed, it should open a pop-up window with a form-text-field and data must present in this text field.
2. I have a database with 4 tables named myname, urname, hername, hisname. What I want is to retrieve data of table-myname into a page and then retrieve those data of other tables which may match the data of table-myname; into same page.
As if table-myname have data like John with code-01 and then these 3 tables must show those codes which are having data like John.
I'm using "POST" vs "GET" because the string is so long, but I'm wondering if the string is to long even for "POST". Code:
View Replies View RelatedFor Each keyb In Request.Form
If Left(keyb, 15)="excelFieldName_" Then
'Response.Write(Request.Form(keyb) & "<br />")
ReDim Preserve arrExcel(myCounterb)
arrExcel(myCounterb) = Request.Form(keyb)
myCounterb = myCounterb+1
End If
Next
I am able to get the values in the arrExcel array with the code below...
for each item in arrExcel if item <> "None" then
Response.Write item
Response.Write("<br>")
End if
Next
What I would like is to get the index of the item I have found from the array. I then need to get the corresponding index from another array.
I tried item.getIndex, but that does not work ..
Is it possible to use a string to index an array rather than a number? Eg
myArray(lets) = "hello"
myArray(uses) = "goodbye"
myAray(words) = "something"
Response.Write(myArray(hello)) gives 'hello' .
I have a membership application on my site, running off Access database with asp. It has been working fine, made a couple of changes and now all kinds of trouble have broken loose! I have even re-uploaded original files back up, but I am still getting the below error:
"Microsoft JET Database Engine error '80004005'
The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.
/login/user.asp, line 345"
I've probably done this before, but for the life of me I can't remember how
I did it. I need to move values from a DB table into an array to be used
for other queries. The number of records will vary, so I need to make the
array dynamic. Can someone remind me how I can increment the index when I
write a new record? Code:
Am storing images on a database and users query the database to retrieve the images. I want to add a zoom in and zoom out button that will enlarge and reduce the images depending on which button the user clicks.
View Replies View RelatedThe user basically queries the database for some data, and I initially retrieve just part of the data matching the query...
I display the Primary Key as a hyperlink..and when the user clicks on a particular retrieved data..i want to display all the contents about that element alone on another new page...
The problem i am facing is that i do not know the syntax to use the onClick event within an ASP code:
Following is a vbscript code extract triggered by a combobox OnChange event. arrVendorA and arrdefpack are server side arrays and i need the intCounter parameter to be the array index. Code:
<script>
sub getstdPackByVendor(strPartNo, intCounter)
dim selVendor
selvendor= colSelect("cboVendor", intCounter).value
if selvendor= "<%=arrvendorA(intCounter)%>" then
if "<%=arrdefpack(intCounter)%>" = 2 then
colTD("txtStdPack" & intcounter+1 ).innertext = cstr("<%=arrVAStdPAckL2(intCounter)%>")
end if
end if
end sub
</script>
The following code is giving me a type mismatch error at the 'if' statements... any ideas, anyone ?
sub getstdPackByVendor(strPartNo, intCounter)
dim selVendor
selvendor= colSelect("cboVendor", intCounter).value
if selvendor= "<%=arrvendorA(" & intCounter & ")%>" then
if "<%=arrdefpack(" & intCounter & ")%>" = 2 then
colTD("txtStdPack" & intcounter+1 ).innertext =
cstr("<%=arrVAStdPAckL2(" & intCounter & ")%>")
end if
end if
end sub
I am uploading to a server for the first time. I believe that my server will not point to .asp pages as the start page, only .htm is this correct?
I wanted my index.asp page displayed first from the web-site by default, but have been told that I need say, an index.htm which then points to my index.asp page.
Is there a way that I can use my index.asp page as my start page?
for i = 2 to NOD
newdate = DateAdd("d", 1, newdate)
strdate = strdate & newdate & ", "
next
MyArray = split(strdate, ", ")
I have the above code written in one of my asp pages, the date array is splitted, but how do I get the first and last date assign to a variable.....
int min = MyArray(MyArray.Length-1)
int max = MyArray(0)
I got this code from the web, however it gives me an error:
Code:
Microsoft VBScript runtime error '800a01a8'
Object required: 'MyArray'
i have my database in MS Access. a table name products contains fields:
pro_name
no_of_comp
inserting data from form where products field is mutiline text box. split this and store in array then insert records.
now i want to facilitate let user edit their data.
during editing new products are entered with no_of_comp = 1 and already exisiting products gets no_of_comp= no_of_comp + 1.
if user delete product then no_of_company = no_of_comp - 1.
what i want to do is: Code:
How can I remove a value from an array. Like: remove from array where value=bla-bla?
View Replies View RelatedI have an array which has days of the month stored in it. For example at one
time it might have the values
1,2,3,6,7,8,9
at another time it might have the value
4,5,12,14,19,25
These are days of the month that have been selected and read into an array.
What i would like to do is to write them out and put a "X" where the days
were selected Code:
i m getting these value from a query n stored it in an array:
FY2005 P1 (8/1/2005 - 8/31/2005),
FY2005 P2 (9/1/2005 - 9/31/2005) and so on.
i need to use eg
8/1/2005 as startdate and 8/31/2005 as enddate
similarly
9/1/2005 as startdate and ,9/31/2005 as enddate.
and so on
we can split FY2005 P1 (8/1/2005 - 8/31/2005),
FY2005 P2 (9/1/2005 - 9/31/2005) by using split func in vbscript. But how can we use its subparts.i mean 8/1/2005 etc ...
some ready-made code that will loop through the values in an array and sort them in ascending or descending order? I'm about to start building some new functionality that will need to sort the values in an array and then present them in ascending order. My initial thoughts are to loop through the initial array, find the lowest value and then load that value (and all associated values) into a new array.
View Replies View RelatedI am wondering if its possible to load two array ad use one as item title and the other as value, ex:
array1 = "Sally, Jason, Jackson, Marie"
array2 = "24, 54, 21, 33"
For ....
TempSally(Sally) = 24
TempJason(Jason) = 54
....
Next....
I have the following code to check if a field number matches a specific value. here is the code:
View Replies View RelatedI first retrieve the values stored in a session variable (where I have stored an array). Then I assign the session variable to a local array called "myarray".
Assume that "myarray" now contains 5 records. What would the code look like if I want to create a loop that transfers the 5 values from "myarray" into a select box/dropdown list?
How is that done?
I have 24 checkboxes all with the same naming convention, each box has a
value ranging from 1 to 23, what I need to do is fill in the gaps with a
0 value where the user doesn't select a value.
So lets say that the user selects:
1,2,3,4,5,6,7,15,18,19,20
what I want to do is use the split function on the next page to convert
into an array but then I want to redim the array and fill in the missing
values, so I would end up with:
1,2,3,4,5,6,7,0,0,0,0,0,0,0,15,0,0,18,19,20,0,0,0
is it possible to do this and if so how?
I know that cookies can store an array of values, which can be accessed like this:
tempid = Request("cookiename")(i)
Is it possible to use session variables in the same way? Store a array of values in the same session variable and access them on another page by indexing?
I've looked around alot and I've not found anything suggesting that this is possible.
Right now I'm using a single set of cookies to store info on a series of purchaces of the same type of item. I'm hoping to use session variables to replace the cookies.
Does anyone know for certain if this is not possible?
I have part of a keyword search function that is acting supernatural - I have a bubble-sort function that sorts the content of an array, then returns an array containing the item numbers of the original array, arranged in order according to their content. Code:
View Replies View Relatedhow to create an array of checkboxes that were selected from a form on one page and pass them into hidden fields in a form on the next page? I have this massive project I've been working on and am having trouble with this.
View Replies View RelatedI am trying to filter a table of users to select only those records
whose roleID matches a value in an array. There could be any number of
IDs held in the array from one to a few hundred. The array is
generated by splitting a comma delimited memo field from a second
table in an Access DB. I can split the memo field OK, I can
response.write its values, but what I now want to do is add a value
from another table to my reponse write loop. Code:
if i have a vbscript function on a certain form and I assigned some values on an array variable on that function, is there a way for me to retrieve the values of that array on another asp page once i submitted the form?
View Replies View Relatedi have date field in my database table containing date & time value. i want to display records according to system date.
database table name : products
field in database table : pdate
i ahd tried following:
dt = Date
tm = Time
pd = dt & " " & tm
SQL:
select * from products where pdate = #"&pd&"#
u is not working. it gives me syntax error in date.
i had tried all the options like #'pd'#, # " & pd & "# and many more.
Im trying to match a list of numbers like this :
if num in (1,2,5,6,8,9) then 'matching any of the number in the list
action
end if
This syntax is wrong, can someone tell me the correct syntex or izzit possible to do something like this using vbscript?
I have a search page which has radio buttons for two search options (location, price) and checkboxes for one other option (type). The radio buttons reference the "general" table in my database, and the checkboxes reference boolean records in the "cuisine" table.
My task is to display, on a subsequent page, records that match the two radio buttons selected as well as each checkbox. Code:
I have these two pages on root directory on the serverhow do i tell the server which one to pick up, or will the browser pick up the .html by default or do i have to manually configure it to do so?
View Replies View RelatedI have a page that calls itself using a form. The form has two select elements. In the sql statement I am attempting to match the values of the select element to populate a recordset.
The two fields in teh Access db are of type Text and of type Integer. What baffles me is that one sql statement works fine and the other returns nothing. I am having the issue matching on the bedrooms.
In the first statement I took out all other doo-doo and just matched bedrooms = request("bedrooms"). On the other one I used p.bedrooms but it keeps turning up empty. Code:
I have a database of Company titles that I want to grab from an access
database, put into an asp array and then pass it to javascript so I can
output it into a CSS styled javascript menu. Right now I am stuck on
how to exactly put the database entries into an asp array. Below is
what I have so far.
So I want it to return distinct entries from the
Title field and put it into the array called Titles after the asp code
has done an HTMLEncode to make sure I can also pass it along to another
asp page. Basically I need to know what to put after the Do While NOT
Rs.EOF. Code: